import (
"bytes"
- "cmd/go/internal/fsys"
"context"
"encoding/json"
"errors"
// when -trimpath is enabled.
if b.gccSupportsFlag(compiler, "-fdebug-prefix-map=a=b") {
if cfg.BuildTrimpath {
+ // TODO(#39958): handle overlays
+
// Keep in sync with Action.trimpath.
// The trimmed paths are a little different, but we need to trim in the
// same situations.
cmdargs := []interface{}{cmd, "-o", outfile, objs, flags}
dir := p.Dir
- out, err := b.runOut(a, base.Cwd, b.cCompilerEnv(), cmdargs...)
-
+ out, err := b.runOut(a, dir, b.cCompilerEnv(), cmdargs...)
if len(out) > 0 {
// Filter out useless linker warnings caused by bugs outside Go.
// See also cmd/link/internal/ld's hostlink method.
cgoLDFLAGS = append([]string{"-fsanitize=memory"}, cgoLDFLAGS...)
}
- // Allows including _cgo_export.h, as well as the user's .h files,
- // from .[ch] files in the package.
+ // Allows including _cgo_export.h from .[ch] files in the package.
cgoCPPFLAGS = append(cgoCPPFLAGS, "-I", objdir)
// cgo
cfiles = append(cfiles, f+".cgo2.c")
}
- hfiles := append([]string{}, p.HFiles...)
-
// TODO: make cgo not depend on $GOARCH?
cgoflags := []string{}
cgoflags = append(cgoflags, "-exportheader="+objdir+"_cgo_install.h")
}
- execdir := p.Dir
-
- // If any of the Cgo, C, or H files are overlaid, copy them all to
- // objdir to ensure that they refer to the right header files.
- // TODO(#39958): Ideally, we'd always do this, but this could
- // subtly break some cgo files that include .h files across directory
- // boundaries, even though they shouldn't.
- hasOverlay := false
- cgoFileLists := [][]string{cgofiles, gccfiles, gxxfiles, mfiles, ffiles, hfiles}
-OverlayLoop:
- for _, fs := range cgoFileLists {
- for _, f := range fs {
- if _, ok := fsys.OverlayPath(mkAbs(p.Dir, f)); ok {
- hasOverlay = true
- break OverlayLoop
- }
- }
- }
- if hasOverlay {
- execdir = objdir
- for _, fs := range cgoFileLists {
- for i := range fs {
- opath, _ := fsys.OverlayPath(mkAbs(p.Dir, fs[i]))
- fs[i] = objdir + filepath.Base(fs[i])
- if err := b.copyFile(fs[i], opath, 0666, false); err != nil {
- return nil, nil, err
- }
- }
- }
- }
-
- if err := b.run(a, execdir, p.ImportPath, cgoenv, cfg.BuildToolexec, cgoExe, "-objdir", objdir, "-importpath", p.ImportPath, cgoflags, "--", cgoCPPFLAGS, cgoCFLAGS, cgofiles); err != nil {
+ if err := b.run(a, p.Dir, p.ImportPath, cgoenv, cfg.BuildToolexec, cgoExe, "-objdir", objdir, "-importpath", p.ImportPath, cgoflags, "--", cgoCPPFLAGS, cgoCFLAGS, cgofiles); err != nil {
return nil, nil, err
}
outGo = append(outGo, gofiles...)
return err
}
- linkobj := str.StringList(ofile, outObj, mkAbsFiles(p.Dir, p.SysoFiles))
+ linkobj := str.StringList(ofile, outObj, p.SysoFiles)
dynobj := objdir + "_cgo_.o"
// we need to use -pie for Linux/ARM to get accurate imported sym
if p.Standard && p.ImportPath == "runtime/cgo" {
cgoflags = []string{"-dynlinker"} // record path to dynamic linker
}
- return b.run(a, base.Cwd, p.ImportPath, b.cCompilerEnv(), cfg.BuildToolexec, cgoExe, "-dynpackage", p.Name, "-dynimport", dynobj, "-dynout", importGo, cgoflags)
+ return b.run(a, p.Dir, p.ImportPath, b.cCompilerEnv(), cfg.BuildToolexec, cgoExe, "-dynpackage", p.Name, "-dynimport", dynobj, "-dynout", importGo, cgoflags)
}
// Run SWIG on all SWIG input files.
if len(objdir) > 1 && objdir[len(objdir)-1] == filepath.Separator {
objdir = objdir[:len(objdir)-1]
}
- rewrite := ""
+ rewrite := objdir + "=>"
rewriteDir := a.Package.Dir
if cfg.BuildTrimpath {
} else {
rewriteDir = a.Package.ImportPath
}
- rewrite += a.Package.Dir + "=>" + rewriteDir + ";"
+ rewrite += ";" + a.Package.Dir + "=>" + rewriteDir
}
// Add rewrites for overlays. The 'from' and 'to' paths in overlays don't need to have
if fsys.OverlayFile != "" {
for _, filename := range a.Package.AllFiles() {
overlayPath, ok := fsys.OverlayPath(filepath.Join(a.Package.Dir, filename))
- rewrite += filepath.Join(objdir, filename) + "=>" + filepath.Join(rewriteDir, filename) + ";"
if !ok {
continue
}
- rewrite += overlayPath + "=>" + filepath.Join(rewriteDir, filename) + ";"
+ rewrite += ";" + overlayPath + "=>" + filepath.Join(rewriteDir, filename)
}
- } else {
- rewrite += objdir + "=>"
}
return rewrite
[short] skip
# Test building in overlays.
-# TODO(#39958): add a test case where the destination file in the replace map
+# TODO(matloob): add a test case where the destination file in the replace map
# isn't a go file. Either completely exclude that case in fs.IsDirWithGoFiles
# if the compiler doesn't allow it, or test that it works all the way.
-# TODO(#39958): add a test that both gc and gccgo assembly files can include .h
-# files.
# The main package (m) is contained in an overlay. It imports m/dir2 which has one
# file in an overlay and one file outside the overlay, which in turn imports m/dir,
stdout $WORK[/\\]gopath[/\\]src[/\\]m[/\\]printpath[/\\]main.go
stdout $WORK[/\\]gopath[/\\]src[/\\]m[/\\]printpath[/\\]other.go
-go build -overlay overlay.json -o main_cgo_replace$GOEXE ./cgo_hello_replace
-exec ./main_cgo_replace$GOEXE
-stdout '^hello cgo$'
-
-go build -overlay overlay.json -o main_cgo_quote$GOEXE ./cgo_hello_quote
-exec ./main_cgo_quote$GOEXE
-stdout '^hello cgo$'
-
-go build -overlay overlay.json -o main_cgo_angle$GOEXE ./cgo_hello_angle
-exec ./main_cgo_angle$GOEXE
-stdout '^hello cgo$'
-
# Run same tests but with gccgo.
env GO111MODULE=off
[!exec:gccgo] stop
exec ./print_trimpath_gccgo$GOEXE
stdout ^\.[/\\]printpath[/\\]main.go
-
-go build -compiler=gccgo -overlay overlay.json -o main_cgo_replace_gccgo$GOEXE ./cgo_hello_replace
-exec ./main_cgo_replace_gccgo$GOEXE
-stdout '^hello cgo$'
-
-go build -compiler=gccgo -overlay overlay.json -o main_cgo_quote_gccgo$GOEXE ./cgo_hello_quote
-exec ./main_cgo_quote_gccgo$GOEXE
-stdout '^hello cgo$'
-
-go build -compiler=gccgo -overlay overlay.json -o main_cgo_angle_gccgo$GOEXE ./cgo_hello_angle
-exec ./main_cgo_angle_gccgo$GOEXE
-stdout '^hello cgo$'
-
-- m/go.mod --
// TODO(matloob): how do overlays work with go.mod (especially if mod=readonly)
module m
"dir/g.go": "overlay/dir_g.go",
"dir2/i.go": "overlay/dir2_i.go",
"printpath/main.go": "overlay/printpath.go",
- "printpath/other.go": "overlay2/printpath2.go",
- "cgo_hello_replace/cgo_header.h": "overlay/cgo_head.h",
- "cgo_hello_quote/cgo_hello.go": "overlay/cgo_hello_quote.go",
- "cgo_hello_quote/cgo_header.h": "overlay/cgo_head.h",
- "cgo_hello_angle/cgo_hello.go": "overlay/cgo_hello_angle.go",
- "cgo_hello_angle/cgo_header.h": "overlay/cgo_head.h"
+ "printpath/other.go": "overlay2/printpath2.go"
}
}
--- m/cgo_hello_replace/cgo_hello_replace.go --
-package main
-
-// #include "cgo_header.h"
-import "C"
-
-func main() {
- C.say_hello()
-}
--- m/cgo_hello_replace/cgo_header.h --
- // Test that this header is replaced with one that has the proper declaration.
-void say_goodbye();
-
--- m/cgo_hello_replace/goodbye.c --
-#include <stdio.h>
-
-void say_hello() { puts("hello cgo\n"); }
-
-- m/overlay/f.go --
package main
func printMessage() {
dir.PrintMessage()
}
--- m/overlay/cgo_hello_quote.go --
-package main
-
-// #include "cgo_header.h"
-import "C"
-
-func main() {
- C.say_hello()
-}
--- m/overlay/cgo_hello_angle.go --
-package main
-
-// #include <cgo_header.h>
-import "C"
-
-func main() {
- C.say_hello()
-}
--- m/overlay/cgo_head.h --
-void say_hello();
--- m/cgo_hello_quote/hello.c --
-#include <stdio.h>
-
-void say_hello() { puts("hello cgo\n"); }
--- m/cgo_hello_angle/hello.c --
-#include <stdio.h>
-
-void say_hello() { puts("hello cgo\n"); }
-
go run ./list-dwarf hello.exe
! stdout gopath/src
-
-# Do the above, with the cgo (but not .c) sources in an overlay
-# Check that the source path appears when -trimpath is not used.
-mkdir $WORK/overlay
-cp hello.go $WORK/overlay/hello.go
-mkdir hello_overlay
-cp hello.c hello_overlay/hello.c
-go build -overlay overlay.json -o hello_overlay.exe ./hello_overlay
-grep -q gopath[/\\]src hello_overlay.exe
-! grep -q $WORK[/\\]overlay hello_overlay.exe
-go run ./list-dwarf hello_overlay.exe
-stdout gopath[/\\]src
-! stdout $WORK[/\\]overlay
-
-# Check that the source path does not appear when -trimpath is used.
-go build -overlay overlay.json -trimpath -o hello_overlay.exe ./hello_overlay
-! grep -q gopath[/\\]src hello_overlay.exe
-! grep -q $WORK[/\\]overlay hello_overlay.exe
-go run ./list-dwarf hello_overlay.exe
-! stdout gopath/src
-! stdout $WORK[/\\]overlay
-
-- go.mod --
module m
go 1.14
--- overlay.json --
-{
- "Replace": {
- "hello_overlay/hello.go": "../../overlay/hello.go"
- }
-}
-- hello.c --
#include <stdio.h>