In makeFuncStub and methodValueCall, it stores ctxt (DX) as an
argument of moveMakeFuncArgPtrs, and assumes it does not change
by the call. This is not guaranteed, and it does happen if
-clobberdead compiler flag is used. Store it somewhere else and
reload after the call.
Change-Id: I9307e3cf94db4b38305ab35494088386dfcbaae8
Reviewed-on: https://go-review.googlesource.com/c/go/+/310409
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Michael Knyszek <mknyszek@google.com> Reviewed-by: Than McIntosh <thanm@google.com>
David Chase [Fri, 16 Apr 2021 04:15:31 +0000 (00:15 -0400)]
cmd/compile: spill all the parameters around morestack
former code only spilled those parameters mentioned in code
AT THE REGISTER LEVEL, this caused problems with liveness
sometimes (which worked on whole variables including
aggregates).
Updates #40724.
Change-Id: Ib9fdc50d95d1d2b1f1e405dd370540e88582ac71
Reviewed-on: https://go-review.googlesource.com/c/go/+/310690
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Cherry Zhang <cherryyz@google.com>
Hilko Bengen [Sun, 6 Dec 2020 21:33:59 +0000 (21:33 +0000)]
net/http/fcgi: eliminate race, keep request id until end of stdin
There was a race condition that could lead to child.serveRequest
removing the request ID before child.handleRequest had read the empty
FCGI_STDIN message that indicates end-of-stream which in turn could
lead to child.serveRequest blocking while trying to consume the
request body.
Now, we remove the request ID from within child.handleRequest after
the end of stdin has been detected, eliminating the race condition.
Since there are no more concurrent modifications/accesses
to child.requests, we remove the accompanying sync.Mutex.
Change-Id: I80c68e65904a988dfa9e3cceec1829496628ff34
GitHub-Last-Rev: b3976111ae1d3bbbfa36045f99acce7911a18c44
GitHub-Pull-Request: golang/go#42840
Reviewed-on: https://go-review.googlesource.com/c/go/+/273366
Trust: Damien Neil <dneil@google.com>
Trust: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Damien Neil <dneil@google.com>
Simplified both tests significantly by removing logic for writing
the client/server side messages. The flake was likely because of a
race between the closing of the local pipe from inside the test
and closing of the pipe from within the handshakeContext goroutine.
Wait to close the local pipe in the test until after the test
has finished running.
The build.Default context really needs to accurately describe
the default build context. The goexperiment tags being a special
case in the go command violates that rule and is the root cause
of the various try-bot failures blocking the enabling of regabi.
(The cleanups I made in golang.org/x/tools were long overdue
but are not strictly necessary for making regabi work; this CL is.)
Having moved the GOEXPERIMENT parsing into internal/buildcfg,
go/build can now use it to set up build.Default, in the new field
ToolTags, meant to hold toolchain-determined tags (for now,
just the experiments). And at the same time we can remove the
duplication of GOOS and GOARCH defaults.
And then once build.Default is set up accurately, the special case
code in cmd/go itself can be removed, and the special case code
in test/run.go is at least a bit less special.
Jay Conrod [Fri, 16 Apr 2021 17:34:37 +0000 (13:34 -0400)]
cmd/go: fix mod_install_pkg_version
mainPackagesOnly now includes non-main packages matched by literal
arguments in the returned slice, since their errors must be reported.
GoFilesPackages attaches the same error to its package if
opts.MainOnly is true. This changes the error output of 'go run'
slightly, but it seems like an imporovement.
For #42088
Change-Id: I8f2942470383af5d4c9763022bc94338f5314b07
Reviewed-on: https://go-review.googlesource.com/c/go/+/310829
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com> Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
The xcoff writer has several "ldr.SymVersion(s) != 0" checks. The
intent of these is to check for file-local (or static) symbols. Prior
to the introduction of symbol ABIs, this was indeed equivalent since
only file-local symbols has non-zero versions, but ABIs also use the
symbol version space. This still happened to work until much more
recently because we were only ever cgo-exporting version 0 symbols,
but CL 309341 changed this, causing these checks to fail on symbols
that were okay to export.
cmd/compile: don't insert VarDef for already-initialized results
Currently, when we about to emit code that sets the function
results and returns, it emits a VarDef. But in some cases, the
result node is actually live and holding useful data. VarDef
means that we are about to (re)initialize it so all previous
data are dead, but that is not true. Don't insert that.
Also don't add VarDef for register results. We are not going to
store anything (currently it doesn't cause problem, just
unnecessary).
Change-Id: I9dd3b70b4a3f5035af028b143fde8fafa2f11fa0
Reviewed-on: https://go-review.googlesource.com/c/go/+/310589
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Than McIntosh <thanm@google.com>
These functions take the address of an argument and expect to be able
to reach later arguments from that pointer. This means they must be
laid out sequentially in memory (using ABI0) and all arguments must be
live even though they don't all appear to be referenced. This is
exactly what go:cgo_unsafe_args does.
Without this, GOEXPERIMENT=regabi,regabiargs on windows/amd64 crashes
on runtime startup because the stdcall functions are called with their
arguments in registers, so taking the address of one of them has no
bearing on the memory locations of the following arguments.
With this, GOEXPERIMENT=regabi,regabiargs on windows/amd64 passes
all.bash.
Jay Conrod [Thu, 15 Apr 2021 22:06:45 +0000 (18:06 -0400)]
cmd/go/internal/load: convert two global flags to an options struct
PackageOpts is a new struct type accepted by package loading
functions. It initially has two fields: IgnoreImports, and
ModResolveTests. Previously, these were global variables set by
clients. We'll add more to this in the future.
For #40775
Change-Id: I6956e56502de836d3815ce788bdf16fc5f3e5338
Reviewed-on: https://go-review.googlesource.com/c/go/+/310669
Trust: Jay Conrod <jayconrod@google.com>
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Bryan C. Mills <bcmills@google.com>
cmd/internal/objabi,test: use correct GOEXPERIMENT build tags in test/run.go
Currently, run.go sets GOEXPERIMENT build tags based on the
*difference* from the baseline experiment configuration, rather than
the absolute experiment configuration. This differs from cmd/go. As a
result, if we set a baseline configuration and don't override it with
a GOEXPERIMENT setting, run.go won't set any GOEXPERIMENT build tags,
instead of setting the tags corresponding to the baseline
configuration.
Fix this by making compile -V=goexperiment produce the full
GOEXPERIMENT configuration, which run.go can then use to set exactly
the right set of build tags.
Joshua Harshman [Wed, 27 May 2020 15:54:41 +0000 (09:54 -0600)]
net/http: add to deadlines only when positive
The existing implementation allows read / write deadlines to exist
in the past. This updates conditionals to only add to the deadline
when the value is positive.
Fixes: #39177
Change-Id: I841c30ba2849a337e7bc98c8aa136c4527c314ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/235437 Reviewed-by: Emmanuel Odeke <emmanuel@orijtech.com> Reviewed-by: Damien Neil <dneil@google.com>
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Damien Neil <dneil@google.com>
Paul E. Murphy [Thu, 15 Apr 2021 18:41:01 +0000 (13:41 -0500)]
cmd/compile: fix ANDI/SRWI merge on ppc64
The shift amount should be masked to avoid rotation values
beyond the numer of bits. In this case, if the shift amount
is 0, it should rotate 0, not 32.
Fixes #45589
Change-Id: I1e764497a39d0ec128e29af42352b70c70b2ecc5
Reviewed-on: https://go-review.googlesource.com/c/go/+/310569
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com> Reviewed-by: Carlos Eduardo Seo <carlos.seo@linaro.org>
Trust: Carlos Eduardo Seo <carlos.seo@linaro.org>
Robert Griesemer [Wed, 14 Apr 2021 20:10:34 +0000 (13:10 -0700)]
cmd/compile/internal/syntax: fix error message for ... without type
Only complain about missing type; leave it to type-checking
to decide whether "..." is permitted in the first place.
Fixes #43674.
Change-Id: Icbc8f084e364fe3ac16076406a134354219c08d0
Reviewed-on: https://go-review.googlesource.com/c/go/+/310209
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Robert Findley <rfindley@google.com>
Paul E. Murphy [Tue, 9 Mar 2021 22:55:11 +0000 (16:55 -0600)]
cmd/internal/obj: consolidate AMOVW and AMOVWZ optab entries
This requires consolidating the register move operations into a
single case entry in asmout. These moves are also used to
sign/zero-extend register values.
Combine the three asmout cases for register moves. This allows
AMOVWZ and AMOVW to be handled with the same optab entries.
Likewise, remove the diagnostic error for non-zero constant
loads into R0 using the register move operations, it is not
possible to match this asmout case with a non-zero constant.
Finally, fix the load constant 0 via "MOV[BHW]{,Z} $0, Rx".
These now generate "li Rx, $0" instead of a zero/sign-extend
of the contents of R0.
Change-Id: Ia4a263661582f10feda27ee21cb121e05ea931dc
Reviewed-on: https://go-review.googlesource.com/c/go/+/308190
Run-TryBot: Paul Murphy <murp@ibm.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com> Reviewed-by: Carlos Eduardo Seo <carlos.seo@linaro.org>
Trust: Carlos Eduardo Seo <carlos.seo@linaro.org>
Currently almost all math functions have the following pattern:
func Sin(x float64) float64
func sin(x float64) float64 {
// ... pure Go implementation ...
}
Architectures that implement a function in assembly provide the
assembly implementation directly as the exported function (e.g., Sin),
and architectures that don't implement it in assembly use a small stub
to jump back to the Go code, like:
TEXT ·Sin(SB), NOSPLIT, $0
JMP ·sin(SB)
However, most functions are not implemented in assembly on most
architectures, so this jump through assembly is a waste. It defeats
compiler optimizations like inlining. And, with regabi, it actually
adds a small but non-trivial overhead because the jump from assembly
back to Go must go through an ABI0->ABIInternal bridge function.
Hence, this CL reorganizes this structure across the entire package.
It now leans on inlining to achieve peak performance, but allows the
compiler to see all the way through the pure Go implementation.
func sin(x float64) float64 {
// ... pure Go implementation ...
}
Architectures that have assembly implementations use build-tagged
files to set haveArchX to true an provide an archX implementation.
That implementation can also still call back into the Go
implementation (some of them do this).
Prior to this change, enabling ABI wrappers results in a geomean
slowdown of the math benchmarks of 8.77% (full results:
https://perf.golang.org/search?q=upload:20210415.6) and of the Tile38
benchmarks by ~4%. After this change, enabling ABI wrappers is
completely performance-neutral on Tile38 and all but one math
benchmark (full results:
https://perf.golang.org/search?q=upload:20210415.7). ABI wrappers slow
down SqrtIndirectLatency-12 by 2.09%, which makes sense because that
call must still go through an ABI wrapper.
With ABI wrappers disabled (which won't be an option on amd64 much
longer), on linux/amd64, this change is largely performance-neutral
and slightly improves the performance of a few benchmarks:
(Because there are so many benchmarks, I've applied the Šidák
correction to the alpha threshold. It makes relatively little
difference in which benchmarks are statistically significant.)
Paul E. Murphy [Mon, 5 Apr 2021 18:36:13 +0000 (13:36 -0500)]
cmd/link: issue error if elf header overruns
This is probably unlikely in practice, but when debugging alignment
related issues on ppc64 using very small text section splits, the elf
header could grow beyond the preallocated space and quietly stomp
on the first few text sections.
The previous CL introduced macros for transitions from the Windows ABI
to the Go ABI. This CL does the same for SysV and uses them in almost
all places where we transition from the C ABI to the Go ABI.
Compared to Windows, this transition is much simpler and I didn't find
any places that were getting it wrong. But this does let us unify a
lot of code nicely and introduces some degree of abstraction around
these ABI transitions.
Change-Id: Ib6bdecafce587ce18fca4c8300fcf401284a2bcd
Reviewed-on: https://go-review.googlesource.com/c/go/+/309930
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Michael Knyszek <mknyszek@google.com>
runtime,runtime/cgo: save all necessary registers on entry to Go on Windows
There are several assembly functions that transition from the Windows
ABI to the Go ABI. These all need to save all registers that are
callee-save in the Windows ABI and caller-save in the Go ABI and
prepare the register state for Go. However, they all do this slightly
differently and most of them don't save the necessary XMM registers
for this transition (which could corrupt them in the C caller).
Furthermore, now that we have a carefully specified Go ABI, it's clear
that none of these actually get all of the details 100% right.
So, unify this code into two macros in a shared header in
runtime/cgo/abi_amd64.h that handle all necessary registers and setup
and use these macros everywhere on Windows that handles transitions
from C to Go.
This function bounces between the C and Go ABIs a few times. This CL
narrows the scope of the Go -> C transition to just around the branch
that calls C. This lets us take advantage of C callee-save registers
to simplify the code a little.
Rémy Oudompheng [Wed, 27 Mar 2019 05:55:52 +0000 (06:55 +0100)]
strconv: Implement Ryū algorithm for ftoa shortest mode
This patch implements the algorithm from Ulf Adams,
"Ryū: Fast Float-to-String Conversion" (doi:10.1145/3192366.3192369)
for formatting floating-point numbers with a fixed number of decimal
digits.
It is not a direct translation of the reference C implementation
but still follows the original paper. In particular, it uses full
128-bit powers of 10, which allows for more precision in the other
modes (fixed ftoa, atof).
Rémy Oudompheng [Sun, 24 Mar 2019 22:21:38 +0000 (23:21 +0100)]
strconv: implement Ryū-like algorithm for fixed precision ftoa
This patch implements a simplified version of Ulf Adams,
"Ryū: Fast Float-to-String Conversion" (doi:10.1145/3192366.3192369)
for formatting floating-point numbers with a fixed number of decimal
digits.
It uses the same principles but does not need to handle
the complex task of finding a shortest representation.
This allows to handle a few more cases than Grisu3, notably
formatting with up to 18 significant digits.
internal/bytealg: port more performance-critical functions to ABIInternal
CL 308931 ported several runtime assembly functions to ABIInternal so
that compiler-generated ABIInternal calls don't go through ABI
wrappers, but it missed the runtime assembly functions that are
actually defined in internal/bytealg.
This eliminates the cost of wrappers for the BleveQuery and
GopherLuaKNucleotide benchmarks, but there's still more to do for
Tile38.
eric fang [Tue, 13 Apr 2021 02:48:32 +0000 (02:48 +0000)]
cmd/internal/obj/arm64: fix the wrong sp dst register of ADDS/SUBS instructions
According the armv8-a specification, the destination register of the ADDS/ADDSW/
SUBS/SUBSW instructions can not be RSP, the current implementation does not
check this and encodes this wrong instruction format as a CMN instruction. This
CL adds a check and test cases for this situation.
Change-Id: I92cc2f8e17dbda70f0dce8fddf1ca6d5d7730589
Reviewed-on: https://go-review.googlesource.com/c/go/+/309989 Reviewed-by: eric fang <eric.fang@arm.com> Reviewed-by: Cherry Zhang <cherryyz@google.com>
Trust: eric fang <eric.fang@arm.com>
Run-TryBot: eric fang <eric.fang@arm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Damien Neil [Thu, 15 Apr 2021 00:31:09 +0000 (17:31 -0700)]
time: add missing "os" import to zoneinfo_test.go
Updates #45448
Change-Id: I2e79ae6b9cf43a481aa703578712619ea344e421
Reviewed-on: https://go-review.googlesource.com/c/go/+/310212
Trust: Damien Neil <dneil@google.com>
Run-TryBot: Damien Neil <dneil@google.com> Reviewed-by: Ian Lance Taylor <iant@golang.org>
Keith Randall [Wed, 14 Apr 2021 23:18:58 +0000 (16:18 -0700)]
cmd/compile: propagate pragmas from generic function to stenciled implementation
Change-Id: I28a1910890659aaa449ffd2a847cd4ced5a8600d
Reviewed-on: https://go-review.googlesource.com/c/go/+/310211
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Dan Scales <danscales@google.com>
Dan Scales [Wed, 14 Apr 2021 21:54:14 +0000 (14:54 -0700)]
cmd/compile: look for function in instantiations in all global assignments
Add in some missing global assignment ops to the list of globals ops
that should be traversed to look for generic function instantiations.
The most common other one for global assigments (and the relevant one
for this bug) is OAS2FUNC, but also look at global assigments with
OAS2DOTTYPE, OAS2MAPR, OAS2RECV, and OASOP.
Bonus small fix: get rid of -G=3 case in ir.IsAddressable. Now that we
don't call the old typechecker from noder2, we don't need this -G-3
check anymore.
Fixes #45547.
Change-Id: I75fecec55ea0d6f62e1c2294d4d77447ed9be6ae
Reviewed-on: https://go-review.googlesource.com/c/go/+/310210
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Robert Griesemer <gri@golang.org>
Amit Kumar [Tue, 22 Sep 2020 13:22:06 +0000 (18:52 +0530)]
mime: add mime type for avif image file format
Fixes #44602
Change-Id: I28b6df5e2523fc2ece6fd8251fcabc83c7c38d89
Reviewed-on: https://go-review.googlesource.com/c/go/+/256478
Trust: Ian Lance Taylor <iant@golang.org>
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change-Id: I4d8e5d7e57818355ef2bc33b57ddf9c8b8da3e62
Reviewed-on: https://go-review.googlesource.com/c/go/+/310030
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Michael Knyszek <mknyszek@google.com>
Change-Id: Ic096fe1c58c124fb8d84ee15c9446e7ed060b24f
Reviewed-on: https://go-review.googlesource.com/c/go/+/310032
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Michael Knyszek <mknyszek@google.com>
cmd/go: add a Go source file in TestScript/mod_sumdb
This test expects 'go mod tidy' to fail if the existing module graph
has a bad checksum. However, there is no intrinsic reason why 'go mod
tidy' should fail in that case: the module contains no packages, and
thus no imports, so 'go mod tidy' can justifiably remove all
requirements without regard to any errors that may have already been
present in the module graph.
Adding a source file that imports a package from the module with the
bad checksum should guarantee that 'go mod tidy' reports the checksum
eror.
For #36460
Change-Id: I59734ac524031288bc03a11f58eed5abe2db76b3
Reviewed-on: https://go-review.googlesource.com/c/go/+/309334
Trust: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Jay Conrod <jayconrod@google.com>
In CL 307909 we generate code that spills pointer-typed argument
registers if it is part of an SSA-able aggregate. The current
code spill the register unconditionally. Sometimes it is
unnecessary, because it is already spilled, or it is never live.
This CL reworks the spill generation. We move it to the end of
compilation, after liveness analysis, so we have information about
if a spill is necessary, and only generate spills for the
necessary ones.
Change-Id: I8d60be9b2c47651aeda14f5e2d1bbd207c134b26
Reviewed-on: https://go-review.googlesource.com/c/go/+/309331
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: David Chase <drchase@google.com> Reviewed-by: Than McIntosh <thanm@google.com>
Michael Anthony Knyszek [Sat, 10 Apr 2021 00:05:07 +0000 (00:05 +0000)]
runtime: update debug call protocol for register ABI
The debug call tests currently assume that the target Go function is
ABI0; this is clearly no longer true when we switch to the new ABI, so
make the tests set up argument register state in the debug call handler
and copy back results returned in registers.
A small snag in calling a Go function that follows the new ABI is that
the debug call protocol depends on the AX register being set to a
specific value as it bounces in and out of the handler, but this
register is part of the new register ABI, so results end up being
clobbered. Use R12 instead.
Next, the new desugaring behavior for "go" statements means that
newosproc1 must always call a function with no frame; if it takes any
arguments, it closes over them and they're passed in the context
register. Currently when debugCallWrap creates a new goroutine, it uses
newosproc1 directly and passes a non-zero-sized frame, so that needs to
be updated. To fix this, briefly use the g's param field which is
otherwise only used for channels to pass an explicitly allocated object
containing the "closed over" variables. While we could manually do the
desugaring ourselves (we cannot do so automatically because the Go
compiler prevents heap-allocated closures in the runtime), that bakes in
more ABI details in a place that really doesn't need to care about them.
Finally, there's an old bug here where the context register was set up
in CX, so technically closure calls never worked. Oops. It was otherwise
harmless for other types of calls before, but now CX is an argument
register, so now that interferes with regular calls, too.
For #40724.
Change-Id: I652c25ed56a25741bb04c24cfb603063c099edde
Reviewed-on: https://go-review.googlesource.com/c/go/+/309169
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com> Reviewed-by: Austin Clements <austin@google.com> Reviewed-by: Alessandro Arzilli <alessandro.arzilli@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
go/internal/gccgoimporter: replace os.MkdirTemp with T.TempDir
Updates #45402
Change-Id: Ie84795ed456883c0558fa9b5e3f2186f5f2c0fd9
Reviewed-on: https://go-review.googlesource.com/c/go/+/309356
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Martin Sucha [Mon, 12 Apr 2021 05:57:25 +0000 (07:57 +0200)]
time: move slim test tzdata to testdata directory
The lines with tzdata are quite long.
It is easier to just copy a file than to encode it as
a string literal when adding a new test case.
Change-Id: Ibcaf347c3101a0f05b094e582b3473c7c35b685a
Reviewed-on: https://go-review.googlesource.com/c/go/+/308998
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Change-Id: Ic2f696837034de17333a6a53127a4bfd301e96a4
Reviewed-on: https://go-review.googlesource.com/c/go/+/309354
Run-TryBot: Ian Lance Taylor <iant@golang.org> Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Robert Griesemer [Wed, 14 Apr 2021 00:48:45 +0000 (17:48 -0700)]
cmd/compile/internal/types2: add Named.SetTParams and Named.Orig methods
Named.SetTParams sets the type parameters for a named type.
Named.Orig returns the original generic type an instantiated
type is derived from. Added a new field orig for that purpose
and renamed the already existing orig field to fromRHS.
Finally, updated various comments.
Change-Id: Ic9d173e42740422d195713d8bdc62a54dc8c5f54
Reviewed-on: https://go-review.googlesource.com/c/go/+/309832
Trust: Robert Griesemer <gri@golang.org> Reviewed-by: Robert Findley <rfindley@google.com>
Rob Findley [Wed, 14 Apr 2021 14:52:30 +0000 (10:52 -0400)]
cmd/dist: add tests using the typeparams build tag
Now that go/ast changes have been guarded behind the typeparams build
tag, we no longer have coverage for tests involving generic code.
Add a new testing step to cmd/dist to run go/... and cmd/gofmt tests
using -tags=typeparams.
Comment out parser object resolution assertions that currently fail, and
which will be fixed by CL 304456.
Fixes #44933
Change-Id: I481dd4246a016f410307865b6c6c2bb3c8e6e3bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/310071
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Robert Griesemer <gri@golang.org>
Rob Findley [Wed, 14 Apr 2021 13:34:28 +0000 (09:34 -0400)]
go/ast: fix broken build with typeparams build constraint
My rebase of https://golang.org/cl/300649 before submitting broke the
build (and tests) when using the typeparams build constraint. In a
subsequent CL I add test coverage back to cmd/dist.
This time, I've tested by running:
- go test -tags=typeparams go/...
- go test -tags=typeparams cmd/gofmt
All tests pass except for the new TestResolution/typeparams.go2, which I
will fix in a follow-up CL.
For #44933
Change-Id: I439d387841604cf43a90e2ce41dbe6bbbdb0306d
Reviewed-on: https://go-review.googlesource.com/c/go/+/310070
Trust: Robert Findley <rfindley@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Robert Griesemer <gri@golang.org>
David Chase [Tue, 13 Apr 2021 00:53:03 +0000 (20:53 -0400)]
cmd/compile: rescue stmt boundaries from OpArgXXXReg and OpSelectN.
Fixes this failure:
go test cmd/compile/internal/ssa -run TestStmtLines -v
=== RUN TestStmtLines
stmtlines_test.go:115: Saw too many (amd64, > 1%) lines without
statement marks, total=88263, nostmt=1930
('-run TestStmtLines -v' lists failing lines)
The failure has two causes.
One is that the first-line adjuster in code generation was relocating
"first lines" to instructions that would either not have any code generated,
or would have the statment marker removed by a different believed-good heuristic.
The other was that statement boundaries were getting attached to register
values (that with the old ABI were loads from the stack, hence real instructions).
The register values disappear at code generation.
The fixes are to (1) note that certain instructions are not good choices for
"first value" and skip them, and (2) in an expandCalls post-pass, look for
register valued instructions and under appropriate conditions move their
statement marker to a compatible use.
Also updates TestStmtLines to always log the score, for easier comparison of
minor compiler changes.
Updates #40724.
Change-Id: I485573ce900e292d7c44574adb7629cdb4695c3f
Reviewed-on: https://go-review.googlesource.com/c/go/+/309649
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Cherry Zhang <cherryyz@google.com>
Than McIntosh [Tue, 13 Apr 2021 17:49:55 +0000 (13:49 -0400)]
cmd/internal/obj: don't emit args_stackmap for ABIInternal asm funcs
The compiler currently emits an "*.args_stackmap" symbol for all
bodyless functions, so that asm functions will have the proper stack
map. At the moment the code in the compiler that emits args_stackmap
assumes ABI0; to avoid misleading stackmaps, turn off args_stackmap
generation for non-ABI0 asm functions.
Updates #40724.
Change-Id: Ia5e3528d56da5fb107e799bd658e52496ba4a331
Reviewed-on: https://go-review.googlesource.com/c/go/+/309790
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Austin Clements <austin@google.com> Reviewed-by: Cherry Zhang <cherryyz@google.com>
Than McIntosh [Tue, 13 Apr 2021 17:46:52 +0000 (13:46 -0400)]
cmd/asm: require NOSPLIT for ABIInternal asm functions
Change the assembler to enforce the requirement that ABIInternal
functions need to be NOSPLIT. At the moment all of the assembly
routines in the runtime that are defined as ABIInternal also
happen to be NOSPLIT, but this CL makes it mandatory.
Updates #40724.
Change-Id: Ief80d22de1782edb44b798fcde9aab8a93548722
Reviewed-on: https://go-review.googlesource.com/c/go/+/309789
Trust: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Austin Clements <austin@google.com> Reviewed-by: Cherry Zhang <cherryyz@google.com>
reflect: keep pointer register results alive in callMethod
When callMethod calls the underlying method, after reflectcall
it gets the result registers in "Ints" slots but not in "Ptrs"
slots. If the GC runs at this point, it may lose track of those
pointers and free the memory they point to.
To make sure the GC sees the pointer results, copy "Ints" to
"Ptrs", and keep them alive until we return to the caller.
This fixes test/fixedbugs/issue27695.go with register ABI.
Change-Id: I4092c91bcbd6954683740a12d91d689900446875
Reviewed-on: https://go-review.googlesource.com/c/go/+/309909
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Michael Knyszek <mknyszek@google.com>
Michael Anthony Knyszek [Thu, 1 Apr 2021 19:12:02 +0000 (19:12 +0000)]
runtime: make gcEffectiveGrowthRatio a method on gcControllerState
For #44167.
Change-Id: Ie3cf8d2960c843a782ec85426fa73c279adaed64
Reviewed-on: https://go-review.googlesource.com/c/go/+/306605
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Michael Pratt <mpratt@google.com>
Michael Anthony Knyszek [Thu, 1 Apr 2021 19:09:40 +0000 (19:09 +0000)]
runtime: pass work.userForced to gcController.endCycle explicitly
For #44167.
Change-Id: I15817006f1870d6237cd06dabad988da3f23a6d6
Reviewed-on: https://go-review.googlesource.com/c/go/+/306604
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Michael Pratt <mpratt@google.com>
Michael Anthony Knyszek [Thu, 1 Apr 2021 18:38:14 +0000 (18:38 +0000)]
runtime: move next_gc and last_next_gc into gcControllerState
This change moves next_gc and last_next_gc into gcControllerState under
the names heapGoal and lastHeapGoal respectively. These are
fundamentally GC pacer related values, and so it makes sense for them to
live here.
except for updates to comments and gcControllerState methods, where
they're accessed through the receiver, and trace-related renames of
NextGC -> HeapGoal, while we're here.
For #44167.
Change-Id: I1e871ad78a57b01be8d9f71bd662530c84853bed
Reviewed-on: https://go-review.googlesource.com/c/go/+/306603
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Michael Pratt <mpratt@google.com>
Ruslan Andreev [Tue, 22 Dec 2020 11:22:14 +0000 (19:22 +0800)]
runtime: move roots' bases calculation to gcMarkRootPrepare
This patch provides changes according to Austin's TODO. It just moves
calculation of base indexes of each root type from markroot function
to gcMarkRootPrepare.
syscall: don't defer close raw Socketpair fds in tests
The raw fds are successively wrapped using os.NewFile and will be closed
by (*os.File).Close. Avoids a double close, in the worst case closing an
unrelated fd.
Change-Id: I86aabe5ed865eff43d264ddae1fb07c935868e97
Reviewed-on: https://go-review.googlesource.com/c/go/+/309353
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Ian Lance Taylor <iant@golang.org>
Keith Randall [Tue, 13 Apr 2021 23:31:56 +0000 (16:31 -0700)]
cmd/compile: fix importing of method expressions
For OMETHEXPR, the Name in the Selection needs to be properly
linked up to the method declaration. Use the same code we
already have for ODOTMETH and OCALLPART to do that.
Fixes #45503
Change-Id: I7d6f886d606bae6faad8c104f50c177f871d41c8
Reviewed-on: https://go-review.googlesource.com/c/go/+/309831
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com> Reviewed-by: Dan Scales <danscales@google.com>
Michael Anthony Knyszek [Thu, 1 Apr 2021 18:09:59 +0000 (18:09 +0000)]
runtime: create setGCPercent method for gcControllerState
This change breaks out the computations done by setGCPercent into
a method on gcControllerState for easier testing later. It leaves behind
the global implementation details.
For #44167.
Change-Id: I3b0cf1475b032fcd4ebbd01cf4e80de0b55ce7b0
Reviewed-on: https://go-review.googlesource.com/c/go/+/306602
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Michael Pratt <mpratt@google.com>
Michael Anthony Knyszek [Thu, 1 Apr 2021 18:01:46 +0000 (18:01 +0000)]
runtime: create initializer for gcControllerState
Now that gcControllerState contains almost all of the pacer state,
create an initializer for it instead of haphazardly setting some fields.
For #44167.
Change-Id: I4ce1d5dd82003cb7c263fa46697851bb22a32544
Reviewed-on: https://go-review.googlesource.com/c/go/+/306601
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Michael Pratt <mpratt@google.com>
The only exception to this generation is usage of these variables
in gcControllerState methods.
For #44167.
Change-Id: I8b620b3061114f3a3c4b65006f715fd977b180a8
Reviewed-on: https://go-review.googlesource.com/c/go/+/306600
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Michael Pratt <mpratt@google.com>
Michael Anthony Knyszek [Thu, 1 Apr 2021 16:31:29 +0000 (16:31 +0000)]
runtime: make gcSetTriggerRatio a method of gcControllerState
gcSetTriggerRatio's purpose is to set a bunch of downstream values when
we choose to commit to a new trigger ratio computed by the gcController.
Now that almost all the inputs it uses to compute the downstream values
are in gcControllerState anyway, make it a method of gcControllerState.
For #44167.
Change-Id: I1b7ea709e8378566f812ae3450ab169d7fb66aea
Reviewed-on: https://go-review.googlesource.com/c/go/+/306599
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Michael Pratt <mpratt@google.com>
Dan Scales [Sun, 11 Apr 2021 16:47:13 +0000 (09:47 -0700)]
cmd/compile: set types properly for imported funcs with closures
For the new export/import of node types, we were just missing setting
the types of the closure variables (which have the same types as the
captured variables) and the OCLOSURE node itself (which has the same
type as the Func node).
Re-enabled inlining of functions with closures.
Change-Id: I687149b061f3ffeec3244ff02dc6e946659077a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/308974
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Keith Randall <khr@golang.org>
Robert Griesemer [Tue, 13 Apr 2021 23:33:42 +0000 (16:33 -0700)]
cmd/compile/internal/types2: use a global atomic counter for type parameter ids
This avoids a dependency on a *Checker when we create type parameters
outside the type checker proper, e.g. in an importer. There may be
better solutions but this does the trick for now.
Change-Id: Icf22c934970cb04c88c2729555ae6a79ef5a2245
Reviewed-on: https://go-review.googlesource.com/c/go/+/309830
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org> Reviewed-by: Robert Findley <rfindley@google.com>
Michael Anthony Knyszek [Wed, 31 Mar 2021 22:55:06 +0000 (22:55 +0000)]
runtime: move internal GC statistics from memstats to gcController
This change moves certain important but internal-only GC statistics from
memstats into gcController. These statistics are mainly used in pacing
the GC, so it makes sense to keep them in the pacer's state.
except for a few special cases, like updating names in comments and when
these fields are used within gcControllerState methods (at which point
they're accessed through the reciever).
For #44167.
Change-Id: I6bd1602585aeeb80818ded24c07d8e6fec992b93
Reviewed-on: https://go-review.googlesource.com/c/go/+/306598
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Michael Pratt <mpratt@google.com>
cmd/compile: always zero the temporary in mapKeyTemp
As we are taking its address, always zero it. In many cases the
temporary will be optimized out. But in case it does not (e.g. -N,
-race), this ensures it has the right liveness information.
May fix the noopt builder.
Change-Id: I3d5d617c276d2a1a1aaebff813b4cd60bc691592
Reviewed-on: https://go-review.googlesource.com/c/go/+/309771
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Than McIntosh <thanm@google.com>
Rob Findley [Fri, 5 Mar 2021 15:57:48 +0000 (10:57 -0500)]
go/*,cmd/gofmt: guard AST changes with the typeparams build tag
This CL changes our approach to guarding type parameter functionality
and API. Previously, we guarded type parameter functionality with the
parser.parseTypeParams parser mode, and were in the process of hiding
the type parameter API behind the go1.18 build constraint.
These mechanisms had several limitations:
+ Requiring the parser.parseTypeParams mode to be set meant that
existing tooling would have to opt-in to type parameters in all
places where it parses Go files.
+ The parseTypeParams mode value had to be copied in several places.
+ go1.18 is not specific to typeparams, making it difficult to set up
the builders to run typeparams tests.
This CL addresses the above limitations, and completes the task of
hiding the AST API, by switching to a new 'typeparams' build constraint
and adding a new go/internal/typeparams helper package.
The typeparams build constraint is used to conditionally compile the new
AST changes. The typeparams package provides utilities for accessing and
writing the new AST data, so that we don't have to fragment our parser
or type checker logic across build constraints. The typeparams.Enabled
const is used to guard tests that require type parameter support.
The parseTypeParams parser mode is gone, replaced by a new
typeparams.DisableParsing mode with the opposite sense. Now, type
parameters are only parsed if go/parser is compiled with the typeparams
build constraint set AND typeparams.DisableParsing not set. This new
parser mode allows opting out of type parameter parsing for tests.
How exactly to run tests on builders is left to a follow-up CL.
Updates #44933
Change-Id: I3091e42a2e5e2f23e8b2ae584f415a784b9fbd65
Reviewed-on: https://go-review.googlesource.com/c/go/+/300649
Trust: Robert Findley <rfindley@google.com>
Run-TryBot: Robert Findley <rfindley@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Robert Griesemer <gri@golang.org>
After this, comments referencing these symbols were updated via a simple
sed command.
For #44167.
Change-Id: I6bb01597c2130686c01f967d0f106b06860ad2db
Reviewed-on: https://go-review.googlesource.com/c/go/+/306597
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Michael Pratt <mpratt@google.com>
Michael Anthony Knyszek [Wed, 31 Mar 2021 21:47:41 +0000 (21:47 +0000)]
runtime: break out GC pacer into its own file
This change breaks out the GC pacer into its own file so that it'll be
easier to see the full implementation and change it. It also suggests an
obvious place to put tests (mgcpacer_test.go).
This includes all of gcControllerState, gcSetTriggerRatio, anything
related to GOGC, and all related globals and constants.
This is almost a clean move, except that globals and constants are
formatted into blocks instead of having a separate "var" declaration for
each one.
For #44167.
Change-Id: I85aa84ce85c6cfbe0b33e8a3c91cbe9dc41de8cb
Reviewed-on: https://go-review.googlesource.com/c/go/+/306596
Trust: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Michael Pratt <mpratt@google.com>
Following CL 309029, this CL does the same thing for map
functions (mapaccess, mapassign, mapdelete).
For simplicity, always wrap "defer delete(m, k)". With
regabidefers enabled, this call is wrapped in a closure and the
rewriting happens automatically. Without regabidefers, it may not
be wrapped for certain key types, and then we'd need special
handling of the delete (because earlier the order pass does not
handle it). And we will turn on defer wrapping by default anyway.
Change-Id: I30663b1aa8e1d6f98e1fb81bf8c0c0ce607ab80b
Reviewed-on: https://go-review.googlesource.com/c/go/+/309510
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Than McIntosh <thanm@google.com>
- It made assumptions about what registers memclrNoHeapPointers would
preserve. Besides being an abstraction violation and lurking
maintenance issue, this actively became a problem for regabi because
the call to memclrNoHeapPointers now happens through an ABI wrapper,
which is generated by the compiler and hence we can't easily control
what registers it clobbers.
- The amd64 implementation (at least), does not interact with the host
ABI correctly. Notably, it doesn't save many of the registers that
are callee-save in the host ABI but caller-save in the Go ABI.
- It interacts strangely with the NOSPLIT checker because it allocates
an entire M and G on its stack. It worked around this on arm64, and
happened to do things the NOSPLIT checker couldn't track on 386 and
amd64, and happened to be *4 bytes* below the limit on arm (so any
addition to the m or g structs would cause a NOSPLIT failure). See
CL 309031 for a more complete explanation.
Fixes #45530.
Updates #40724.
Change-Id: Ic70d4d7e1c17f1d796575b3377b8529449e93576
Reviewed-on: https://go-review.googlesource.com/c/go/+/309634
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Michael Knyszek <mknyszek@google.com>
This replaces the externalthreadhandler-based implementation of
profileloop with one that uses newm to start a new thread. This is a
step toward eliminating externalthreadhandler.
For #45530.
Change-Id: Id8e5540423fe2d2004024b649afec6998f77b092
Reviewed-on: https://go-review.googlesource.com/c/go/+/309633
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Michael Knyszek <mknyszek@google.com>
This replaces the externalthreadhandler-based implementation of
ctrlhandler with one based on compileCallback. This is a step toward
eliminating externalthreadhandler.
For #45530.
Change-Id: I2de2f2f37777af292db67ccf8057b7566aab81f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/309632
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Michael Pratt <mpratt@google.com> Reviewed-by: Michael Knyszek <mknyszek@google.com>
Change-Id: I296f8c676c68ed1e10b6ad1a17b5b23d2c395252
Reviewed-on: https://go-review.googlesource.com/c/go/+/309355
Run-TryBot: Ian Lance Taylor <iant@golang.org> Reviewed-by: Joe Tsai <thebrokentoaster@gmail.com> Reviewed-by: Ian Lance Taylor <iant@golang.org>
Trust: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Ian Lance Taylor [Tue, 13 Apr 2021 00:30:36 +0000 (17:30 -0700)]
cmd/link: force external linking for DragonFly cgo programs
Change-Id: Idce4eec2a4698a94aa7b40590dffb6bf9bd45342
Reviewed-on: https://go-review.googlesource.com/c/go/+/309571
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Go Bot <gobot@golang.org> Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
cmd/compile,cmd/link: resolve cgo symbols to the correct Go ABI
Currently, Go functions exported to cgo have some confusion around
ABIs that leads to crashes. The cmd/cgo-generated C code references an
exported Go wrapper function (which calls the underlying exported user
function). The linker resolves this reference to the ABI0 entry-point
to that Go wrapper function because all host object references are
currently assumed to be to version 0 of a symbol. This gets passed via
crosscall2 and winds its way to cgocallbackg1, which puts this ABI0
entry-point into a function value and calls it. Unfortunately,
function values always use the ABIInternal calling convention, so
calling this ABI0 entry-point goes poorly.
Fix this by threading definition ABIs through the cgo export mechanism
so the linker can resolve host object references (which have no
concept of multiple ABIs) to the correct Go symbol. This involves a
few pieces:
- The compiler extends the cgo_export_{static,dynamic} directives that
get passed on to the linker with symbol definition ABIs.
- The linker parses the ABIs in the cgo_export_{static,dynamic}
directives to look up the right symbol to apply export attributes to
and put in the dynexp list.
- For internal linking, the linker's Loader structure tracks the right
symbol (in particular the right ABI) to resolve host object
references to, and we use this in all of the host object loaders.
- For external linking, we mangle only the non-ABIInternal symbols
now, so the external linker is able to resolve the correct reference
from host objects to Go symbols.
Currently, setCgoAttr populates the cgo_export_{static,dynamic} maps
with symbol names of exported symbols, which are then re-looked-up by
deadcode and setupdynexp, which in turn puts the re-looked-up symbols
in ctxt.dynexp. setCgoAttr already looked up the Syms, so simplify all
of this by making setCgoAttr populate ctxt.dynexp directly and
eliminating the cgo_export_{static,dynamic} maps. Recording Syms
directly also sets us up to use correct symbol versions for these
exports, rather than just assuming version 0 for all lookups.
Since setupdynexp doesn't really do any "setting up" of dynexp any
more with this change, we fold the remaining logic from setupdynexp
directly into addexport, where it has better context anyway. This also
eliminates a sorting step, since we no longer do a non-deterministic
map iteration to build the dynexp slice.
cmd/link: move cgo export map from loadcgo to setCgoAttr
Currently, both loadcgo and setCgoAttr do some processing of
cgo_export_static and cgo_export_dynamic cgo directives, which means
they both have to parse them. There's no reason to do this in loadcgo,
so move all directive processing to setCgoAttr.
setCgoAttr takes a lookup function, but there's only a single call and
setCgoAttr already has access to the lookup function passed at that
call. Simplify setCgoAttr by eliminating the lookup parameter and
calling the lookup function directly.
Ian Lance Taylor [Tue, 13 Apr 2021 05:26:37 +0000 (22:26 -0700)]
mime: in globs2 file only keep first time extension is seen
Fixes #45534
Change-Id: I9855607e845951f26ab85cb179ec6dea40d92156
Reviewed-on: https://go-review.googlesource.com/c/go/+/309574
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org> Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>