Russ Cox [Sun, 22 Feb 2015 17:41:32 +0000 (12:41 -0500)]
[dev.cc] cmd/go: fix expansion of 'std', add 'cmd'
The wildcard 'std' is defined in documentation to be all the packages
in the Go standard library. It has also historically matched commands
in the main repo, but as we implement core commands in Go, that
becomes problematic. We need a wildcard that means just the library,
and since 'std' is already documented to have that definition, make it so.
Add a new wildcard 'cmd' for the commands in the main repo ($GOROOT).
Commands that want both can say 'std cmd' (or 'cmd std') to get the
effect of the old 'std'.
Update make.bash etc to say both std and cmd most of the time.
Exception: in race.bash, do not install race-enabled versions of
the actual commands. This avoids trying to write binaries while
using them, but more importantly it avoids enabling the race
detector and its associated memory overhead for the already
memory-hungry compilers.
Jan Kratochvil [Sat, 21 Feb 2015 16:35:01 +0000 (17:35 +0100)]
gdb: fix "gdb.error: No struct named reflect.rtype."
With a trivial Golang-built program loaded in gdb-7.8.90.20150214-7.fc23.x86_64
I get this error:
(gdb) source ./src/runtime/runtime-gdb.py
Loading Go Runtime support.
Traceback (most recent call last):
File "./src/runtime/runtime-gdb.py", line 230, in <module>
_rctp_type = gdb.lookup_type("struct reflect.rtype").pointer()
gdb.error: No struct type named reflect.rtype.
(gdb) q
No matter if this struct should or should not be in every Golang-built binary
this change should fix that with no disadvantages.
Change-Id: I0c490d3c9bbe93c65a2183b41bfbdc0c0f405bd1
Reviewed-on: https://go-review.googlesource.com/5521 Reviewed-by: Ian Lance Taylor <iant@golang.org>
Mark Bucciarelli [Sun, 22 Feb 2015 02:14:45 +0000 (21:14 -0500)]
Call --> CallSlice in two spots. No logic change, docs only.
Change-Id: I6011e162214db2d65efc1ecdb5ec600ca8e5bfe9
Reviewed-on: https://go-review.googlesource.com/5542 Reviewed-by: Ian Lance Taylor <iant@golang.org>
Rob Pike [Sat, 21 Feb 2015 02:15:20 +0000 (18:15 -0800)]
[dev.cc] cmd/asm: fix build
Representation in printout of MRC instruction differs between
32- and 64-bit machines. It's just a hex dump. Fix this one day,
but for now just comment out the instruction.
Change-Id: I4709390659e2e0f2d18ff6f8e762f97cdbfb4c16
Reviewed-on: https://go-review.googlesource.com/5424 Reviewed-by: Rob Pike <r@golang.org>
Rob Pike [Fri, 20 Feb 2015 18:06:44 +0000 (10:06 -0800)]
[dev.cc] cmd/asm: add end-to-end test
Add trivial golden test that verifies output matches expectation.
The input is based on the old grammar and is intended to cover
the space of the input language.
Rob Pike [Sat, 21 Feb 2015 00:02:11 +0000 (16:02 -0800)]
[dev.cc] cm/asm: fix up arm after cross-check with 5a
As with the previous round for ppc64, this CL fixes a couple of things
that 5a supported but asm did not, both simple.
1) Allow condition code on MRC instruction; this was marked as a TODO.
2) Allow R(n) notation in ARM register shifts. The code needs a rethink
but the tests we're leading toward will make the rewrite easier to test and
trust.
Dmitry Vyukov [Fri, 30 Jan 2015 10:31:43 +0000 (13:31 +0300)]
cmd/trace: add new command
Trace command allows to visualize and analyze traces.
Run as:
$ go tool trace binary trace.file
The commands opens web browser with the main page,
which contains links for trace visualization,
blocking profiler, network IO profiler and per-goroutine
traces.
Also move trace parser from runtime/pprof/trace_parser_test.go
to internal/trace/parser.go, so that it can be shared between
tests and the command.
Change-Id: Ic97ed59ad6e4c7e1dc9eca5e979701a2b4aed7cf
Reviewed-on: https://go-review.googlesource.com/3601 Reviewed-by: Andrew Gerrand <adg@golang.org>
David Crawshaw [Fri, 20 Feb 2015 18:15:56 +0000 (13:15 -0500)]
[dev.cc] runtime: print to stderr as well as android logd
Restores stack traces in the android/arm builder.
Change-Id: If637aa2ed6f8886126b77cf9cc8a0535ec7c4369
Reviewed-on: https://go-review.googlesource.com/5453 Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Change-Id: I7d598e53de86586bb9702d8e9276a4d6aece2dfc
Reviewed-on: https://go-review.googlesource.com/4950 Reviewed-by: Ian Lance Taylor <iant@golang.org>
Dmitry Vyukov [Sat, 14 Feb 2015 12:54:25 +0000 (15:54 +0300)]
runtime: adjust program counters in race detector
In most cases we pass return PC to race detector,
and race runtime subtracts one from them.
However, in manual instrumentation in runtime
we pass function start PC to race runtime.
Race runtime can't distinguish these cases
and so it does not subtract one from top PC.
This leads to bogus line numbers in some cases.
Make it consistent and always pass what looks
like a return PC, so that race runtime can
subtract one and still get PC in the same function.
Also delete two unused functions.
Update #8053
Change-Id: I4242dec5e055e460c9a8990eaca1d085ae240ed2
Reviewed-on: https://go-review.googlesource.com/4902 Reviewed-by: Ian Lance Taylor <iant@golang.org>
Dmitry Vyukov [Tue, 17 Feb 2015 11:25:49 +0000 (14:25 +0300)]
runtime: fix cputicks on x86
See the following issue for context:
https://github.com/golang/go/issues/9729#issuecomment-74648287
In short, RDTSC can produce skewed results without preceding LFENCE/MFENCE.
Information on this matter is very scrappy in the internet.
But this is what linux kernel does (see rdtsc_barrier).
It also fixes the test program on my machine.
Update #9729
Change-Id: I3c1ffbf129fdfdd388bd5b7911b392b319248e68
Reviewed-on: https://go-review.googlesource.com/5033 Reviewed-by: Ian Lance Taylor <iant@golang.org>
Mikio Hara [Tue, 10 Feb 2015 03:24:11 +0000 (12:24 +0900)]
net, syscall: more accurate parsers for routing messages on BSD variants
This changes fixes two issues with regard to handling routing messages
as follows:
- Misparsing on platforms (such as FreeBSD) supporting multiple
architectures in the same kernel (kern.supported_archs="amd64 i386")
- Misparsing with unimplemented messages such as route, interface
address state notifications
To fix those issues, this change implements all the required socket
address parsers, adds a processor architecture identifying function to
FreeBSD and tests.
Fixes #9707.
Fixes #8203.
Change-Id: I7ed7b4a0b6f10f54b29edc681a2f35603f2d8d45
Reviewed-on: https://go-review.googlesource.com/4330 Reviewed-by: Ian Lance Taylor <iant@golang.org>
It would allow go get and friends to transparently work as expected,
automatically rewriting https URLs to use SSH for auth. This worked both
when pushing and pulling.
In Go 1.4 this broke, now requiring the use of `go get -f` instead of `go get`
in order to fetch private repositories. This seems neither intended nor
practical, as it requires changing a lot of tooling.
So just use `git config remote.origin.url` instead of `git remote -v` as
this reflects the actual substitution intended in the `insteadOf` config
directive.
Also remove now useless parsing.
Also add a check against supported schemes to avoid errors in later
commands using this URL and expecting such a scheme.
Fixes #9697
Change-Id: I907327f83504302288f913a68f8222a5c2d673ee
Reviewed-on: https://go-review.googlesource.com/3504 Reviewed-by: Andrew Gerrand <adg@golang.org>
Rob Pike [Fri, 20 Feb 2015 00:34:51 +0000 (16:34 -0800)]
[dev.cc] cmd/asm: bring asm on ppc64 in sync with 9a
I created a .s file that covered every instruction and operand production
in 9a/a.y and made sure that 9a and asm give bit-identical results for it.
I found a few things, including one addressing mode (R1+R2) that was
not present in the source we use. Fixed those
I also found quite a few things where 9a's grammar accepts the instruction
but liblink rejects it. These need to be sorted out, and I will do that separately.
Once that's done, I'll turn my test file into a proper test.
Changes to converter:
- fatal does not return, so no fallthrough after fatal in switch
- many more function results and variables identified as bool
- simplification of negated boolean expressions
Russ Cox [Wed, 18 Feb 2015 02:52:42 +0000 (21:52 -0500)]
[dev.cc] cmd/gc: tweak default fatal in ordersafeexpr for c2go
c2go was putting a fallthrough after the fatal call.
Changed c2go to know that fatal doesn't return,
but then there is a missing return at the end of
the translated Go function.
Move code around a little to make C and Go agree.
Russ Cox [Thu, 19 Feb 2015 18:38:46 +0000 (13:38 -0500)]
runtime: reorganize memory code
Move code from malloc1.go, malloc2.go, mem.go, mgc0.go into
appropriate locations.
Factor mgc.go into mgc.go, mgcmark.go, mgcsweep.go, mstats.go.
A lot of this code was in certain files because the right place was in
a C file but it was written in Go, or vice versa. This is one step toward
making things actually well-organized again.
Austin Clements [Thu, 19 Feb 2015 02:56:12 +0000 (21:56 -0500)]
runtime: use more natural types in struct workbuf
Until recently, struct workbuf had only lfnode and uintptr fields
before the obj array to make it convenient to compute the size of the
obj array. It slowly grew more fields until this became inconvenient
enough that it was restructured to make the size computation easy.
Now the size computation doesn't care what the field types are, so
switch to more natural types.
Austin Clements [Tue, 17 Feb 2015 15:53:31 +0000 (10:53 -0500)]
runtime: switch to gcWork abstraction
This converts the garbage collector from directly manipulating work
buffers to using the new gcWork abstraction.
The previous management of work buffers was rather ad hoc. As a
result, switching to the gcWork abstraction changes many details of
work buffer management.
If greyobject fills a work buffer, it can now pull from work.partial
in addition to work.empty.
Previously, gcDrain started with a partial or empty work buffer and
fetched an empty work buffer if it filled its current buffer (in
greyobject). Now, gcDrain starts with a full work buffer and fetches
an partial or empty work buffer if it fills its current buffer (in
greyobject). The original behavior was bad because gcDrain would
immediately drop the empty work buffer returned by greyobject and
fetch a full work buffer, which greyobject was likely to immediately
overflow, fetching another empty work buffer, etc. The new behavior
isn't great at the start because greyobject is likely to immediately
overflow the full buffer, but the steady-state behavior should be more
stable. Both before and after this change, gcDrain fetches a full
work buffer if it drains its current buffer. Basically all of these
choices are bad; the right answer is to use a dual work buffer scheme.
Previously, shade always fetched a work buffer (though usually from
m.currentwbuf), even if the object was already marked. Now it only
fetches a work buffer if it actually greys an object.
Austin Clements [Thu, 12 Feb 2015 17:53:48 +0000 (12:53 -0500)]
runtime: introduce higher-level GC work abstraction
This introduces a producer/consumer abstraction for GC work pointers
that internally handles the details of filling, draining, and
shuffling work buffers.
In addition to simplifying the GC code, this should make it easy for
us to change how we use work buffers, including cleaning up how we use
the work.partial queue, reintroducing a FIFO lookahead cache, adding
prefetching, and using dual buffers to avoid flapping.
This commit doesn't change any existing code. The following commit
will switch the garbage collector from explicit workbuf manipulation
to gcWork.
Rob Pike [Thu, 19 Feb 2015 04:30:55 +0000 (20:30 -0800)]
[dev.cc] cmd/asm: add ppc64
Fairly straightforward. A couple of unusual addressing tricks.
Also added the ability to write R(10) to mean R10. PPC64 uses
this for a couple of large register spaces. It appears for ARM now
as well, since I saw some uses of that before, although I rewrote
them in our source. I could put it in for 386 and amd64 but it's
not worth it.
Aaron Jacobs [Wed, 18 Feb 2015 22:35:28 +0000 (09:35 +1100)]
encoding/json: Fixed the comment specifying Marshal behavior for maps.
The comment previously was reversed in sense (it appeared to be
describing unmarshaling). I've fixed that, and added the caveat that map
keys are subject to UTF-8 coercion like other strings.
Nigel Tao [Tue, 17 Feb 2015 05:28:10 +0000 (16:28 +1100)]
image: change Rectangle.Eq to return true for all empty rectangles, even
if their nominal Min and Max points differ.
This is a behavior change, but arguably a bug fix, as Eq wasn't
previously consistent with In, and the concept of a rectangle being a
set of points. This is demonstrated by the new geom_test.go test.
It does mean that r.Eq(s) no longer implies that Inset'ting both r and s
with a negative inset results in two rectangles that are still Eq, but
that seems acceptable to me.
The previous behavior is still available as "r == s".
Also clarify the image.Rect doc comment when the inputs are
non-canonical.
Also simplify the Point and Rectangle Eq implementations dating from
before Go 1.0, when you couldn't compare structs via the == operator.
Change-Id: Ic39e628db31dc5fe5220f4b444e6d5000eeace5b
Reviewed-on: https://go-review.googlesource.com/5006 Reviewed-by: Rob Pike <r@golang.org>
Env vars were incorrectly copying whole value of http.RemoteAddr
to REMOTE_ADDR and REMOTE_HOST. They contained IP:port pair which
instead should only have IP (RFC 3875, other sources).
Module also was not setting REMOTE_PORT variable which become de-facto
standard for passing TCP client port to CGI scripts (Apache mod_cgi,
IIS, and probably others)
Dmitry Vyukov [Thu, 5 Feb 2015 13:08:29 +0000 (16:08 +0300)]
cmd/gc: generate simpler names for closures
Fixes #8291
There were several complaints about closure names in the issue tracker.
The first problem is that you see names like net/http.func·001
in profiles, traces, etc. And there is no way to figure out what
is that function.
Another issue is non-US-ascii symbols. All programs out there
should accept UTF-8. But unfortunately it is not true in reality.
For example, less does not render middle dot properly.
This change prepends outer function name to closure name and
replaces middle dot with dot. Now names look like:
Rob Pike [Wed, 18 Feb 2015 02:30:27 +0000 (18:30 -0800)]
[dev.cc] cmd/asm: make 4(SP) illegal except on 386
Require a name to be specified when referencing the pseudo-stack.
If you want a real stack offset, use the hardware stack pointer (e.g.,
R13 on arm), not SP.
Fix affected assembly files.
Change-Id: If3545f187a43cdda4acc892000038ec25901132a
Reviewed-on: https://go-review.googlesource.com/5120
Run-TryBot: Rob Pike <r@golang.org> Reviewed-by: Russ Cox <rsc@golang.org> Reviewed-by: Dave Cheney <dave@cheney.net>
Russ Cox [Thu, 12 Feb 2015 01:37:56 +0000 (20:37 -0500)]
[dev.cc] cmd/yacc: introduce yyParser to expose parser state
Historically, yacc has supported various kinds of inspections
and manipulations of the parser state, exposed as global variables.
The Go implementation of yacc puts that state (properly) in local
stack variables, so it can only be exposed explicitly.
There is now an explicit parser type, yyParser, returned by a
constructor, yyNewParser.
type yyParser interface {
Parse(yyLexer) int
Lookahead() int
}
Parse runs a parse. A call to the top-level func Parse
is equivalent to calling yyNewParser().Parse, but constructing
the parser explicitly makes it possible to access additional
parser methods, such as Lookahead.
Lookahead can be called during grammar actions to read
(but not consume) the value of the current lookahead token,
as returned by yylex.Lex. If there is no current lookahead token,
Lookahead returns -1. Invoking Lookahead corresponds to
reading the global variable yychar in a traditional Unix yacc grammar.
To support Lookahead, the internal parsing code now separates
the return value from Lex (yychar) from the reencoding used
by the parsing tables (yytoken). This has the effect that grammars
that read yychar directly in the action (possible since the actions
are in the same function that declares yychar) now correctly see values
from the Lex return value space, not the internal reencoding space.
This can fix bugs in ported grammars not even using SetParse and Lookahead.
(The reencoding was added on Plan 9 for large character sets.
No Plan 9 programs using yacc looked at yychar.)
Other methods may be added to yyParser later as needed.
Obvious candidates include equivalents for the traditional
yyclearin and yyerrok macros.
Change-Id: Iaf7649efcf97e09f44d1f5bc74bb563a11f225de
Reviewed-on: https://go-review.googlesource.com/4850 Reviewed-by: Rob Pike <r@golang.org>
Austin Clements [Tue, 17 Feb 2015 20:01:43 +0000 (15:01 -0500)]
runtime: fix runtime-gdb_test on arm
Apparently when ARM stops at a GDB breakpoint, it appears to be in
syscall.Syscall. The "info goroutines" test expected it to be in a
runtime function. Since this isn't fundamental to the test, simply
tweak the test's regexp to make sure "info goroutines" prints some
running goroutine with an active M, but don't require it to be in any
particular function.
Change-Id: Iba2618b46d3dc49cef62ffb72484b83ea7b0317d
Reviewed-on: https://go-review.googlesource.com/5060 Reviewed-by: Dave Cheney <dave@cheney.net>
Austin Clements [Tue, 17 Feb 2015 02:56:10 +0000 (21:56 -0500)]
runtime: fix GDB "info goroutines" for Go 1.5
"info goroutines" is failing because it hasn't kept up with changes in
the 1.5 runtime. This fixes three issues preventing "info goroutines"
from working. allg is no longer a linked list, so switch to using the
allgs slice. The g struct's 'status' field is now called
'atomicstatus', so rename uses of 'status'. Finally, this was trying
to parse str(pc) as an int, but str(pc) can return symbolic
information after the raw hex value; fix this by stripping everything
after the first space.
This also adds a test for "info goroutines" to runtime-gdb_test, which
was previously quite skeletal.
Change-Id: I8ad83ee8640891cdd88ecd28dad31ed9b5833b7a
Reviewed-on: https://go-review.googlesource.com/4935 Reviewed-by: Minux Ma <minux@golang.org>
Rob Pike [Tue, 17 Feb 2015 16:24:08 +0000 (08:24 -0800)]
[dev.cc] cmd/asm: fix build: handle g in register lists on ARM
Handle the special name of R10 on the ARM - it's g - when it appears
in a register list [R0, g, R3]. Also simplify the pseudo-register parsing
a little.
David Crawshaw [Mon, 16 Feb 2015 19:22:22 +0000 (14:22 -0500)]
cmd/go: skip stat check when using -toolexec
Change-Id: Idc88b1ee950e33cfe757a27e9a3383d879793af7
Reviewed-on: https://go-review.googlesource.com/4934 Reviewed-by: Ian Lance Taylor <iant@golang.org>
Rob Pike [Tue, 17 Feb 2015 04:42:55 +0000 (20:42 -0800)]
[dev.cc] cmd/asm: fix build for x86 architectures
Mishandled the complex addressing mode in masks<>(SB)(CX*8)
as a casualty of the ARM work. Fix by backing all the flows up to
the state where registerIndirect is always called with the input
sitting on the opening paren.
With this, build passes for me with linux-arm, linux-386, and linux-amd64.