Bryan C. Mills [Thu, 10 Nov 2022 15:03:21 +0000 (10:03 -0500)]
go/build: omit PkgObj for packages "unsafe" and "builtin"
Package "builtin" is not a real, importable package; it exists only
for documentation. Package "unsafe" is not compiled into an object
file from its source code; instead, imports of "unsafe" are handled
specially by the compiler.
(In Go 1.19.3, package "unsafe" did not have an install target, while
package "builtin" did but that target was never written.)
Bryan C. Mills [Thu, 10 Nov 2022 14:44:39 +0000 (09:44 -0500)]
go/build: in TestImportDirTarget, only expect an install target when cgo is enabled
As of CL 448803, packages in GOROOT only have install targets when
they have cgo source files. When cgo is not enabled, that condition
is necessarily false, and no install target will exist.
David Chase [Mon, 7 Nov 2022 16:02:08 +0000 (11:02 -0500)]
cmd/compile: add ability to hash-debug on file:line, including inlining
Modified the fmahash gc debug flag to use this, and modified the
test to check for a hash match that includes inlining. Also
made the test non-short to ensure portability.
Note fma.go has been enhanced into an FMA test that requires
two separate FMAs in order to "fail"; if either one is 2-rounding,
then it "passes". (It neither passes nor fails here; its role
is to demonstrate that the FMAs are correctly reported; the
enhanced failure mode was discovered while testing the search
tool.)
Change-Id: I4e328e3654f442d498eac982135420abb59c5434
Reviewed-on: https://go-review.googlesource.com/c/go/+/448358
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Keith Randall <khr@golang.org> Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: David Chase <drchase@google.com>
Robert Findley [Thu, 10 Nov 2022 16:15:26 +0000 (11:15 -0500)]
internal/types: fix the iota value in error code declarations
The new "InvalidSyntaxTree" node in the error code declaration
inadvertently incremented the value of iota by 1. Fix this by moving it
to its own declaration.
Change-Id: I34b33a8caddbbb9e41f431321ec0e5863dc15055
Reviewed-on: https://go-review.googlesource.com/c/go/+/449475
Run-TryBot: Robert Findley <rfindley@google.com>
Auto-Submit: Robert Findley <rfindley@google.com> Reviewed-by: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Keith Randall [Wed, 9 Nov 2022 23:29:09 +0000 (15:29 -0800)]
go/doc: recognize methods on generic types as Funcs
When writing markdown for godoc, we can reference a method M of
a type T as [T.M]. This doesn't currently work for methods on generic
types because the declaration of the type parameter gets in the way.
(You'd have to write [T[P].M] and that doesn't parse, and even if it
did you'd have to spell "P" correctly.)
Get rid of the type parameter when building the list of Funcs so
[T.M] works in godoc if T is generic.
Change-Id: I8ef5264124a944967df3ce20ddd40a2447ff4187
Reviewed-on: https://go-review.googlesource.com/c/go/+/449236 Reviewed-by: Keith Randall <khr@google.com> Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Ian Lance Taylor [Thu, 10 Nov 2022 04:55:17 +0000 (20:55 -0800)]
os/user: allocate buffers in Go memory, not C memory
Since the first implementation of os/user, it's called C malloc
to allocate memory for buffers. However, the buffers are just
used for temporary storage, and we can just a []byte instead.
To make this work without causing cgo pointer errors, we move
the pwd and grp structs into C stack memory, and just return them.
It's OK to store a Go pointer on the C stack temporarily.
Change-Id: I9f8ffb6e51df1e585276c259fe99359d7835df87
Reviewed-on: https://go-review.googlesource.com/c/go/+/449335
Run-TryBot: Ian Lance Taylor <iant@google.com> Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com> Reviewed-by: Ian Lance Taylor <iant@google.com>
cui fliter [Sun, 4 Sep 2022 15:51:20 +0000 (15:51 +0000)]
expvar: convert f to atomic type
For #53821
Change-Id: I2e7c5376e6ca3e3dbb2f92ad771aed62fca8b793
GitHub-Last-Rev: b67ddf81ecec1892871044fbcb143ca4256ebc55
GitHub-Pull-Request: golang/go#54864
Reviewed-on: https://go-review.googlesource.com/c/go/+/428195 Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Keith Randall <khr@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com> Reviewed-by: Keith Randall <khr@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Russ Cox [Fri, 11 Feb 2022 22:17:54 +0000 (17:17 -0500)]
cmd/go: cache compiler flag info
When you run 'go env' or any command that needs to consider
what the default gcc flags are (such as 'go list net' or
'go list <any package with net as a dependency>'),
the go command runs gcc (or clang) a few times to see what
flags are available.
These runs can be quite expensive on some systems, particularly
Macs that seem to need to occasionally cache something before
gcc/clang can execute quickly.
To fix this, cache the derived information about gcc under a cache
key derived from the size and modification time of the compiler binary.
This is not foolproof, but it should be good enough.
% go install cmd/go
% time go env >/dev/null
0.22 real 0.01 user 0.01 sys
% time go env >/dev/null
0.03 real 0.01 user 0.01 sys
%
Russ Cox [Wed, 9 Nov 2022 13:50:51 +0000 (08:50 -0500)]
cmd/api: point to API docs in all.bash failure
When people add new API and get an all.bash failure,
they often don't know about the API checker at all.
Point to the README in the failure message, to try to
help them find what they need to know.
Change-Id: I6b148ec414d212033b371357a5e8c6ab79bb50a4
Reviewed-on: https://go-review.googlesource.com/c/go/+/449015
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org> Reviewed-by: Ian Lance Taylor <iant@google.com> Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
crypto: allow hash.Hash for OAEP and MGF1 to be specified independently
crypto/rsa assumes RSA OAEP uses the same hash to be used for both the label
and the mask generation function. However, implementations in other languages,
such as Java and Python, allow these parameters to be specified independently.
This change allows the MGF hash to be specified independently for decrypt
operations in order to allow decrypting ciphertexts generated in other
environments.
Fixes: #19974
Change-Id: If453d628f0da354ceb3b52863f30087471670f7b
Reviewed-on: https://go-review.googlesource.com/c/go/+/418874
Auto-Submit: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Russ Cox <rsc@golang.org> Reviewed-by: Robert Griesemer <gri@google.com> Reviewed-by: Andrew Bonventre <andybons@golang.org>
Run-TryBot: Andrew Bonventre <andybons@golang.org>
Constantin Konstantinidis [Sat, 23 Jul 2022 07:11:32 +0000 (09:11 +0200)]
encoding/xml: error when more than one colon in qualified names
Add test.
Fixes #20396
Change-Id: I89e9013eb338f831e1908e390b284794df78fb6b
Reviewed-on: https://go-review.googlesource.com/c/go/+/103875
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com> Reviewed-by: Ian Lance Taylor <iant@google.com> Reviewed-by: Michael Knyszek <mknyszek@google.com>
Constantin Konstantinidis [Mon, 20 Aug 2018 18:29:30 +0000 (20:29 +0200)]
encoding/xml: disallow empty namespace when prefix is set
Non-regression tests are added.
Fixes #8068
Change-Id: Icb36c910bbf4955743b7aa8382002b2d9246fadc
Reviewed-on: https://go-review.googlesource.com/c/go/+/105636
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com> Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Matthew Dempsky [Wed, 31 Aug 2022 17:24:04 +0000 (10:24 -0700)]
unsafe: add docs for SliceData, String, and StringData
Updates #53003.
Change-Id: I076d1eb4bd0580002ad8008f3ca213c5edc951ee
Reviewed-on: https://go-review.googlesource.com/c/go/+/427095
Run-TryBot: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: David Chase <drchase@google.com> Reviewed-by: Rob Pike <r@golang.org> Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com> Reviewed-by: Ian Lance Taylor <iant@google.com>
This change made IsAbs return true for certain reserved filenames,
but does not consistently detect reserved names. For example,
"./COM1", "//./COM1", and (on some Windows versions) "COM1.txt"
all refer to the COM1 device, but IsAbs detects none of them.
Since NUL is not an absolute path, do not attempt to detect it
or other device paths in IsAbs. See #56217 for more discussion
of IsAbs and device paths.
For #56217.
Change-Id: If4bf81c7e1a2e8842206c7c5268555102140dae8
Reviewed-on: https://go-review.googlesource.com/c/go/+/448898 Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Damien Neil <dneil@google.com> Reviewed-by: Quim Muntal <quimmuntal@gmail.com>
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Rob Pike <r@golang.org>
Damien Neil [Wed, 9 Nov 2022 00:10:47 +0000 (16:10 -0800)]
os: remove special casing of NUL in Windows file operations
Some file operations, notably Stat and Mkdir, special cased their
behavior when operating on a file named "NUL" (case-insensitive).
This check failed to account for the many other names of the NUL
device, as well as other non-NUL device files: "./nul", "//./nul",
"nul.txt" (on some Windows versions), "con", etc.
Remove the special case.
os.Mkdir("NUL") now returns no error. This is consonant with the
operating system's behavior: CreateDirectory("NUL") succeeds, as
does "MKDIR NUL" on the command line.
os.Stat("NUL") now follows the existing path for FILE_TYPE_CHAR devices,
returning a FileInfo which correctly reports the file as being a
character device.
os.Stat and os.File.Stat have common elements of their logic unified.
Damien Neil [Wed, 19 Oct 2022 21:41:03 +0000 (14:41 -0700)]
path/filepath: detect all forms of \\ volume paths on Windows
Previously, the volumeNameLen function checked for UNC paths starting
with two slashes, a non-'.' character, and another slash. This misses
volume names such as "\\.\C:\".
The previous check for volume names rejects paths beginning
with "\\.". This is incorrect, because while these names are not
UNC paths, "\\.\C:\" is a DOS device path prefix indicating the
C: device. It also misses UNC path prefixes in the form
"\\.\UNC\server\share\".
The previous check for UNC paths also rejects any path with an
empty or missing host or share component. This leads to a number
of possibly-incorrect behaviors, such as Clean(`\\a`) returning `\a`.
Converting the semantically-significant `\\` prefix to a single `\`
seems wrong.
Consistently treat paths beginning with two separators as having
a volume prefix.
Update VolumeName to detect DOS device paths (`\\.\` or `\\?\`),
DOS device paths linking to UNC paths (`\\.\UNC\Server\Share`
or `\\?\UNC\Server\Share`), and UNC paths (`\\Server\Share\`).
Damien Neil [Wed, 9 Nov 2022 17:42:04 +0000 (09:42 -0800)]
cmd/go: improve handling of os.DevNull on Windows
The "go test" and "go build" commands have special-case behavior when
passed "-o /dev/null". These checks are case-sensitive and assume that
os.DevNull is an absolute path. Windows filesystems are case-insensitive
and os.DevNull is NUL, which is not an absolute path.
CL 145220 changed filepath.IsAbs to report "NUL" as absolute to work
around this issue; that change is being rolled back and a better fix here
is to compare the value of -o against os.DevNull before attempting to
merge it with a base path. Make that fix.
On Windows, accept any capitilization of "NUL" as the null device.
This change doesn't cover every possible name for the null device, such
as "-o //./NUL", but this test is for efficiency rather than correctness.
Accepting just the most common name is fine.
Michael Matloob [Tue, 8 Nov 2022 22:33:47 +0000 (17:33 -0500)]
cmd/go: decide whether to install .a based on number of CgoFiles
Instead of hardcoding the set of five packages that depend on cgo to
decide whether a package should have an install target, make the
decision based on whether the package has any CgoFiles. This means that
in nocgo configurations, there will be no installed packages, and that
if an GOOS/GOARCH combination doesn't have cgo files we don't
unnecessarily install a .a.
Because the determination of whether a file is a CgoFile is made later
in the Import functions, the choice of whether to add a PkgObj for teh
case there are CgoFiles is moved later. One concern here is that in some
cases, PkgObj may be set differently in the case of the FindOnly mode,
since the determination is moved across the boundary. We might want
to always set PkgObj after the FindOnly boundary for consistency? cmd/go
doesn't seem to use it when calling Import with FindOnly.
Also remove internal/buildinternal/needs_install.go because we will be
checking whether to install based on the number of cgo files and it
might be overkill to make the NeedsInstalledDotA function be the
equivalent of len(input) > 0.
For #47257
Change-Id: I5f7f2137dc99aaeb2e2695c14e0222093a6b2407
Reviewed-on: https://go-review.googlesource.com/c/go/+/448803 Reviewed-by: Bryan Mills <bcmills@google.com> Reviewed-by: Michael Matloob <matloob@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Michael Matloob <matloob@golang.org>
Damien Neil [Wed, 9 Nov 2022 01:07:40 +0000 (17:07 -0800)]
cmd/go/testdata: don't set GOPATH=NUL in test
An upcoming change to the filepath package to make IsAbs("NUL")==false
on Windows will cause this test to fail, since it sets GOPATH=NUL and
GOPATH must be an absolute path.
Set GOPATH to the name of a text file instead. (The intent is that GOPATH
be set to a path that is not writable.)
Michael Matloob [Mon, 7 Nov 2022 19:30:45 +0000 (14:30 -0500)]
internal/fsys: follow root symlink in fsys.Walk
If fsys.Walk is called with a root directory that is a symlink, follow
the symlink when doing the walk. This allows for users setting their
current directory to a symlink to a module.
Damien Neil [Wed, 9 Nov 2022 01:02:49 +0000 (17:02 -0800)]
cmd/go: more informative test failures when GOROOT is stale
If GOROOT is stale, test fail when commands unexpectedly write to GOROOT.
Include an message in the test failure indicating that this is a possible
and expected reason for the failure, and how to fix it.
Russ Cox [Mon, 7 Nov 2022 16:58:45 +0000 (11:58 -0500)]
cmd/go: print test2json start events
Add a new "Action":"start" test2json event to mark the
start of the test binary execution. This adds useful information
to the JSON traces, and it also lets programs watching test
execution see the order in which the tests are being run,
because we arrange for the starts to happen sequentially.
cui fliter [Tue, 8 Nov 2022 03:37:59 +0000 (11:37 +0800)]
all: fix some comments
Change-Id: I163ea3a770f2228f67d4fb1374653566e64b91f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/448575 Reviewed-by: Damien Neil <dneil@google.com> Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com>
io: correctly process result of sendfile(2) when src returns 0 bytes
Fixes #53658. io.Copy() uses sendfile(2) to avoid allocating extra buffers when src is a file and dst is a TCPConn. However if src returns no bytes current logic treats it as failure and falls back to copying via user space. The following is a benchmark that illustrates the bug.
Change-Id: I703376d53b20e080c6204a73c96867cce16b24cf
GitHub-Last-Rev: 3a50be4f169683bf9caea32892c66619a66ad21a
GitHub-Pull-Request: golang/go#53659
Reviewed-on: https://go-review.googlesource.com/c/go/+/415834
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com> Reviewed-by: Ian Lance Taylor <iant@google.com>
Constantin Konstantinidis [Sun, 15 Apr 2018 09:26:32 +0000 (11:26 +0200)]
encoding/xml: error when closing tag does not match opening tag
Comparing opening and closing tag is done using the prefix when available.
Documentation states that Token returns URI in the Space part of the Name.
Translation has been moved for the End tag before the namespace is removed
from the stack.
After closing a tag using a namespace, the valid namespace must be taken
from the opening tag. Tests added.
Fixes #20685
Change-Id: I4d90b19f7e21a76663f0ea1c1db6c6bf9fd2a389
Reviewed-on: https://go-review.googlesource.com/c/go/+/107255
Run-TryBot: Ian Lance Taylor <iant@golang.org> Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com> Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Constantin Konstantinidis [Thu, 12 Apr 2018 06:55:16 +0000 (08:55 +0200)]
encoding/xml: add check of namespaces to detect field names conflicts
Test added.
Fixes #8535
Change-Id: Ic89c2781e81d963a653180812748b3fc95fb7fae
Reviewed-on: https://go-review.googlesource.com/c/go/+/106575
Run-TryBot: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org> Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com> Reviewed-by: Michael Knyszek <mknyszek@google.com>
Matthew Horsnell [Tue, 28 Jun 2022 13:25:58 +0000 (14:25 +0100)]
runtime internal/cpu: rename "Zeus" "NeoverseV1".
Rename "Zeus" to "NeoverseV1" for the partnum 0xd40 to be
consistent with the documentation of MIDR_EL1 as described in
https://developer.arm.com/documentation/101427/0101/?lang=en
Change-Id: I2e3d5ec76b953a831cb4ab0438bc1c403648644b
Reviewed-on: https://go-review.googlesource.com/c/go/+/414775 Reviewed-by: Jonathan Swinney <jswinney@amazon.com>
Auto-Submit: Ian Lance Taylor <iant@golang.org> Reviewed-by: Eric Fang <eric.fang@arm.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Cherry Mui <cherryyz@google.com> Reviewed-by: Michael Pratt <mpratt@google.com>
Russ Cox [Tue, 8 Nov 2022 21:16:44 +0000 (16:16 -0500)]
net: allocate res_state entirely in C memory
The linux-amd64-wsl builder was failing because the res_nsearch
implementation was storing pointer to the res_state's own fields
in other fields in the res_state. If the res_state is Go memory, this
looks like pointers to Go pointers. Moving the res_state to C memory
avoids the problem.
The linux-amd64-wsl builder has been fixed a different way by
replacing res_nsearch with res_search on Linux, where it is thread-safe.
But other systems that still need to use res_nsearch (such as macOS)
may run into the same kind of problem, so it is probably still worth
arranging for the res_state to live entirely in C memory.
Xiangdong Ji [Fri, 25 Jun 2021 13:51:22 +0000 (21:51 +0800)]
runtime: fix uncondition calls to traceGCSTWDone
startTheWorldWithSema should call traceGCSTWDone only when
the tracing is enabled.
Change-Id: Ibc7181834f68af3923e4b2aee01a57492ab6213e
Reviewed-on: https://go-review.googlesource.com/c/go/+/330835 Reviewed-by: Ian Lance Taylor <iant@google.com> Reviewed-by: Michael Pratt <mpratt@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Jakub Ciolek [Wed, 27 Jul 2022 07:02:17 +0000 (09:02 +0200)]
runtime: remove the started field from sweepdata
This bool doesn't seem to be used anymore. Remove it.
Change-Id: Ic73346a98513c392d89482c5e1d818a90d713516
Reviewed-on: https://go-review.googlesource.com/c/go/+/419654
Run-TryBot: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Michael Knyszek <mknyszek@google.com> Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Matthew Dempsky [Mon, 17 Oct 2022 23:57:07 +0000 (16:57 -0700)]
cmd/compile: fix transitive inlining of generic functions
If an imported, non-generic function F transitively calls a generic
function G[T], we may need to call CanInline on G[T].
While here, we can also take advantage of the fact that we know G[T]
was already seen and compiled in an imported package, so we don't need
to call InlineCalls or add it to typecheck.Target.Decls. This saves us
from wasting compile time re-creating DUPOK symbols that we know
already exist in the imported package's link objects.
Fixes #56280.
Change-Id: I3336786bee01616ee9f2b18908738e4ca41c8102
Reviewed-on: https://go-review.googlesource.com/c/go/+/443535
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: David Chase <drchase@google.com>
Auto-Submit: Matthew Dempsky <mdempsky@google.com>
Russ Cox [Tue, 8 Nov 2022 19:21:27 +0000 (14:21 -0500)]
net: fix res_search uses on alpine, android, dragonfly
On Android and Dragonfly, don't use -lresolv. It doesn't exist there.
On Linux, use res_search instead of res_nsearch.
glibc makes res_search thread-safe by having a per-thread __res.
It still also provides res_nsearch.
musl makes res_search thread-safe by ignoring __res completely.
It does not provide res_nsearch at all.
Changing to res_search on Linux will fix builds on musl-based systems
while keeping glibc-based systems working.
Russ Cox [Tue, 8 Nov 2022 19:04:24 +0000 (14:04 -0500)]
net: pass C string to res_nsearch, in case it stores the pointer
The current code passes a Go pointer to a NUL-terminated C string
to the C function res_nsearch (or res_search), but that function may
in turn store the pointer into the res_state, which is a violation of the
cgo pointer rules and is being detected on the linux-amd64-wsl builder.
Allocating the string in C memory is safer and should resolve
the cgo pointer check. When using libc/syscall mode, the memory
is still allocated Go-side, which could potentially be a problem
if we ever add a moving collector. For now it is OK.
qmuntal [Fri, 4 Nov 2022 08:50:09 +0000 (09:50 +0100)]
cmd/go: fix svn vctest on Windows and make them timezone agnostic
This CL updates svn vctest so they work on Windows.
Side effect is that svn logs are no longer timezone dependant, as this
updated the `svn log` command to format logs using XML, which contain
UTC dates instead of local dates. Therefore it supersedes
https://go-review.googlesource.com/c/go/+/447795.
Michael Anthony Knyszek [Thu, 14 Jul 2022 21:26:55 +0000 (21:26 +0000)]
runtime: smooth cons/mark with a moving average and use actual trigger
This change modifies the pacer in two ways:
* It replaces the PI controller used as a smoothing function with a
simple two-cycle moving average.
* It makes the pacer use the actual GC trigger point for cons/mark (and
other) calculations instead of the precomputed one.
The second part of this change was attempted in the Go 1.19 release
cycle, but could not be done because although it resulted in a
better-behaved pacer, it exploited the PI controller's sensitivity to
history in a way that was ultimately unfavorable for most applications.
This sensitivity is complex to reason about, and forces us into choices
that don't really make sense (like using the precomputed trigger over
the actual one -- that's really a bug fix).
The net effect of this change is intended to be:
* The pacer computes a more stable estimate of the actual cons/mark
ratio, making it easier to understand.
* The pacer is much more accurate at hitting the heap goal, so the GC
respects GOGC much more often and reliably.
* The pacer forces a more stable rate of GC assists in the
steady-state overall.
See https://perf.golang.org/search?q=upload:20221106.10 for benchmark
results and #53892 for complete context. The benchmarks that regress
in memory use appear to be not worth worrying about. In all cases, it appears that the GC was triggering super early, resulting in a lack
of adherence to rule of GOGC.
The fogleman benchmarks just have a single final GC that triggers
early and also happens to be the peak heap size. The tile38
WithinCircle benchmark only has 4 GC cycles in the benchmarked region,
so it's very sensitive to pacing. In this case, the old smoothing
function is getting lucky by starting way too early, avoiding assists. Meanwhile the 2-cycle moving average is more accurate on the heap
goal, but the 1st and 2nd cycle after the initialization phase are operating on a cons/mark from the initialization phase which is much
less active, resulting in a cons/mark that's too low, causing the GC
to start too late, increasing assists, and therefore latency (but
only transiently, at this phase change). I really do think the PI
controller is just getting lucky here with a particular history,
because I've definitely observed it oscillating wildly in response to
a phase change.
This change also moves the PI controller out of mgcpacer.go, because
it's no longer used there. It now lives in mgcscavenge.go, where it's
actually used.
Fixes #53892.
Change-Id: I3f875a2e40f31f381920f91d8b090556b17a2b16
Reviewed-on: https://go-review.googlesource.com/c/go/+/417558
Run-TryBot: Michael Knyszek <mknyszek@google.com> Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Cherry Mui [Mon, 7 Nov 2022 21:46:28 +0000 (16:46 -0500)]
cmd/compile/internal/pgo: allow and ignore profiles with no sample
Passing a profile with no sample is arguably not a user error.
Accept such a profile, and ignore it as it doesn't indicate any
optimizations. This also makes testing easier.
Change-Id: Iae49a4260e20757419643153f50d8d5d51478411
Reviewed-on: https://go-review.googlesource.com/c/go/+/448495
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Michael Pratt <mpratt@google.com>
Russ Cox [Fri, 28 Oct 2022 14:57:14 +0000 (10:57 -0400)]
net: unify CNAME handling across ports
Unix and Windows differ in how they handle LookupCNAME(name).
If name exists in DNS with an A or AAAA record but no CNAME,
then on all operating systems and in the pure Go resolver,
LookupCNAME returns the name associated with the A/AAAA record
(the original name).
TestLookupCNAME has been testing this, because www.google.com
has no CNAME. I think it did at one point, but not anymore, and the
tests are still passing. Also added google.com as a test, since
top-level domains are disallowed from having CNAMEs.
If name exists in DNS with a CNAME record pointing to a record that
does not exist or that has no A or AAAA record,
then Windows has always reported the CNAME value,
but Unix-based systems and the pure Go resolver have reported
a failure instead. cname-to-txt.go4.org is an test record that is
a CNAME to a non-A/AAAA target (the target only has a TXT record).
This CL changes the Unix-based systems and the pure Go resolver
to match the Windows behavior, allowing LookupCNAME to succeed
whenever a CNAME exists.
TestLookupCNAME nows tests the new behavior by looking up
cname-to-txt.go4.org (run by bradfitz).
Russ Cox [Mon, 7 Nov 2022 16:45:57 +0000 (11:45 -0500)]
cmd/go: replace Action.Func with Action.Actor
The interface will let us store actor-specific state in the
interface implementation instead of continuing to grow
the Action struct. In the long term we should remove fields
from the struct that are not used by all Actions.
Sameer Ajmani [Thu, 6 Jan 2022 18:57:05 +0000 (13:57 -0500)]
context: add APIs for writing and reading cancelation cause
Extend the context package to allow users to specify why a context was
canceled in the form of an error, the "cause". Users write the cause
by calling WithCancelCause to construct a derived context, then
calling cancel(cause) to cancel the context with the provided cause.
Users retrieve the cause by calling context.Cause(ctx), which returns
the cause of the first cancelation for ctx or any of its parents.
The cause is implemented as a field of cancelCtx, since only cancelCtx
can be canceled. Calling cancel copies the cause to all derived (child)
cancelCtxs. Calling Cause(ctx) finds the nearest parent cancelCtx by
looking up the context value keyed by cancelCtxKey.
API changes:
+pkg context, func Cause(Context) error
+pkg context, func WithCancelCause(Context) (Context, CancelCauseFunc)
+pkg context, type CancelCauseFunc func(error)
mantuliu [Tue, 18 Oct 2022 03:49:04 +0000 (03:49 +0000)]
cmd/asm: optimize if statement to return directly
Change-Id: Iddf4d3bcc3bc2badf0d0f6b06375c901e76a40bb
GitHub-Last-Rev: 95586bfc1666985c270c3b4dcc827b0fd68d2bfa
GitHub-Pull-Request: golang/go#56268
Reviewed-on: https://go-review.googlesource.com/c/go/+/443315
Run-TryBot: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Ian Lance Taylor <iant@google.com> Reviewed-by: Cherry Mui <cherryyz@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Eric Lagergren [Fri, 4 Nov 2022 06:13:37 +0000 (23:13 -0700)]
math/big: remove underscores from Binomial docs
Change-Id: I7605bcbbaa64bb4273ad458a157b1c6011467973
Reviewed-on: https://go-review.googlesource.com/c/go/+/447915
Run-TryBot: Ian Lance Taylor <iant@google.com> Reviewed-by: Robert Griesemer <gri@google.com> Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Tobias Klauser [Mon, 7 Nov 2022 22:00:14 +0000 (23:00 +0100)]
net/netip: use slice-to-array conversions
Resend of CL 432735 (with one additional conversion that the original CL
missed) after it broke the longtest builder on x/tools and was reverted
in CL 433478. Now that x/tools/go/ssa has support for this, the longtest
x/tools build passes as well.
Use slice-to-array conversions in AddrFromSlice and
(*Addr).UnmarshalBinary. This allows using AddrFrom16 and drop the
redundant ipv6Slice helper.
For #46505
Change-Id: I4d8084b7a97f162e4f7d685c86aac56d960ff693
Reviewed-on: https://go-review.googlesource.com/c/go/+/448396
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com> Reviewed-by: Michael Knyszek <mknyszek@google.com> Reviewed-by: Ian Lance Taylor <iant@google.com>
David Chase [Mon, 7 Nov 2022 19:16:31 +0000 (14:16 -0500)]
cmd/compile: let compiler downgrade its own concurrency
This gets the Go command out of the business of thinking it understands
compiler debug flags, and allows the compiler to turn down its worker
concurrency instead of failing and forcing the user to do the very
same thing. Debug flags that are obviously safe for concurrency
(at least to me) are tagged; probably there's more.
Change-Id: I59bb19861d8a654a9cfd2364ee78c8628212f82e
Reviewed-on: https://go-review.googlesource.com/c/go/+/448359 Reviewed-by: Cherry Mui <cherryyz@google.com>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Austin Clements [Mon, 7 Nov 2022 15:24:23 +0000 (10:24 -0500)]
misc/cgo/test: skip Test9400 on Alpine
Alpine has a known issue where setgid clobbers the Go stack (#39857).
misc/cgo/test skips other tests that use setgid on Alpine, but not
this one. It's not clear to me why this test *used to* pass, but when
I refactored misc/cgo/test in CL 447355 it started failing.
Disable this test on Alpine, like the other setgid tests.
Dan Peterson [Sun, 6 Nov 2022 21:03:00 +0000 (17:03 -0400)]
net: adjust build tags for darwin libc calls
Support for direct libc calls was added in CL 446178 but the build
tags weren't quite activating it when cgo was not enabled. Adjust them
and add a new supporting file for darwin.
This should use the new direct libc calls with both CGO_ENABLED=0 and
CGO_ENABLED=1 when building for darwin.
Updates #12524
Change-Id: Ieee4b298dee13f389ed3a63c0a4a3a18c9180163
Reviewed-on: https://go-review.googlesource.com/c/go/+/448020
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com> Reviewed-by: Michael Knyszek <mknyszek@google.com> Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Dan Peterson <danp@danp.net>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Roland Shoemaker [Mon, 29 Aug 2022 16:40:50 +0000 (09:40 -0700)]
crypto/tls: use certificate cache in client
In verifyServerCertificate parse certificates using the global
certificate cache.
This should signficiantly reduce memory usage in TLS clients which make
concurrent connections which reuse certificates (anywhere in the chain)
since there will only ever be one copy of the certificate at once.
cui fliter [Thu, 3 Nov 2022 07:34:35 +0000 (15:34 +0800)]
math: fix function name in comment
Change-Id: Iabf955cdb161d02cb4a3e06f466b331e1b6eb2c2 Signed-off-by: cui fliter <imcusg@gmail.com>
Reviewed-on: https://go-review.googlesource.com/c/go/+/447456
Run-TryBot: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Ian Lance Taylor <iant@google.com> Reviewed-by: Robert Griesemer <gri@google.com> Reviewed-by: Ian Lance Taylor <iant@google.com>
Roland Shoemaker [Mon, 29 Aug 2022 16:32:34 +0000 (09:32 -0700)]
crypto/tls: add a certificate cache implementation
Adds a BoringSSL CRYPTO_BUFFER_POOL style reference counted intern
table for x509.Certificates. This can be used to significantly reduce
the amount of memory used by TLS clients when certificates are reused
across connections.
Updates #46035
Change-Id: I8d7af3bc659a93c5d524990d14e5254212ae70f4
Reviewed-on: https://go-review.googlesource.com/c/go/+/426454
Run-TryBot: Roland Shoemaker <roland@golang.org> Reviewed-by: Michael Knyszek <mknyszek@google.com> Reviewed-by: Filippo Valsorda <filippo@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Michael Pratt [Wed, 26 Oct 2022 22:12:21 +0000 (18:12 -0400)]
cmd/trace: only include required frames in splits
Though we split traces into 100MB chunks, currently each chunk always
includes the entire stack frame map, including frames for all events in
the trace file, even if they aren't needed by events in this chunk.
This means that if the stack frame JSON alone is >100MB then there is no
space at all for events. In that case, we'll generate splits each
containing 1 event, which is effectively useless.
Handle this more efficiently by only including stack frames referenced
by events in the chunk. Each marginal events only adds at most a few
dozen stack frames, so it should now longer be possible to only include
a tiny number of events.
Fixes #56444.
Change-Id: I58aa8f271c32678028b72d82df16e6ea762ebb39
Reviewed-on: https://go-review.googlesource.com/c/go/+/445895
Run-TryBot: Michael Pratt <mpratt@google.com> Reviewed-by: Michael Knyszek <mknyszek@google.com>
Auto-Submit: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Michael Pratt [Tue, 1 Nov 2022 21:27:41 +0000 (17:27 -0400)]
runtime: yield in goschedIfBusy if gp.preempt
runtime.bgsweep contains an infinite loop. With aggressive enough
inlining, it may not perform any CALLs on a typical iteration. If
the runtime trying to preempt this goroutine, the lack of CALLs may
prevent preemption for ever occurring.
bgsweep does happen to call goschedIfBusy. Add a preempt check there to
make sure we yield eventually.
For #55022.
Change-Id: If22eb86fd6a626094b3c56dc745c8e4243b0fb40
Reviewed-on: https://go-review.googlesource.com/c/go/+/447135
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Michael Knyszek <mknyszek@google.com> Reviewed-by: Cherry Mui <cherryyz@google.com>
Paul E. Murphy [Mon, 24 Oct 2022 22:12:57 +0000 (17:12 -0500)]
codegen: check for PPC64 ISEL in condmove tests
ISEL is roughly equivalent to CMOV on PPC64. Verify ISEL generation
in all reasonable cases.
Note "ISEL test x y z" is the same as "ISEL !test y x z". test is
always one of LT (0), GT (1), EQ (2), SO (3). Sometimes x and y are
swapped if GE/LE/NE is desired.
Yasuhiro Matsumoto [Sat, 5 Nov 2022 14:49:36 +0000 (23:49 +0900)]
cmd/vet: remove unused const
Change-Id: I1f713bbb35917ab50b0cde24a81340aa16c2ed03
Reviewed-on: https://go-review.googlesource.com/c/go/+/448195
Auto-Submit: Ian Lance Taylor <iant@google.com> Reviewed-by: Benny Siegert <bsiegert@gmail.com> Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Dan Kortschak [Sat, 5 Nov 2022 05:44:08 +0000 (16:14 +1030)]
all: fix comment typos
Change-Id: Ic16824482142d4de4d0b949459e36505ee944ff7
Reviewed-on: https://go-review.googlesource.com/c/go/+/448175 Reviewed-by: Robert Griesemer <gri@google.com>
Run-TryBot: Dan Kortschak <dan@kortschak.io>
Auto-Submit: Robert Griesemer <gri@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Dan Kortschak <dan@kortschak.io>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com> Reviewed-by: Ian Lance Taylor <iant@google.com>
Ian Lance Taylor [Fri, 4 Nov 2022 01:15:42 +0000 (18:15 -0700)]
reflect: rewrite value.Equal to avoid allocations
For #46746
Change-Id: I75ddb9ce24cd3394186562dae156fef9fe2d55d3
Reviewed-on: https://go-review.googlesource.com/c/go/+/447798 Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com> Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
cui fliter [Fri, 4 Nov 2022 02:45:43 +0000 (10:45 +0800)]
all: fix function names in comments
Change-Id: I871a747b4b47bccc889f2fdc93a2bcebb041b719
Reviewed-on: https://go-review.googlesource.com/c/go/+/447895 Reviewed-by: Ian Lance Taylor <iant@google.com> Reviewed-by: Robert Griesemer <gri@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Cherry Mui [Fri, 4 Nov 2022 01:11:23 +0000 (21:11 -0400)]
cmd/compile/internal/pgo: use a slice for locations
Currently locations are stored in a map and looked up by ID from
the map. The IDs are usually small sequential integers (the Go
pprof CPU profiles are so). Using a slice is more efficient (with
a fallback map to handle weirdly large IDs).
Change-Id: I9e20d5cebca3a5239636413e1bf2f0b273038031
Reviewed-on: https://go-review.googlesource.com/c/go/+/447803
Run-TryBot: Cherry Mui <cherryyz@google.com> Reviewed-by: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Michael Matloob [Fri, 4 Nov 2022 20:42:52 +0000 (16:42 -0400)]
cmd/go: use clean GOCACHE in TestNewReleaseRebuildsStalePackagesInGOPATH
Now that most GOROOT packages do not have install targets, their
staleness depends on whether their builds have been cached. That means
that, from a clean cache, once
TestNewReleaseRebuildsStalePackagesInGOPATH builds certain targets, they
will stay non-stale for the second run of the test, becasue the will
still be in the cache. So the first run of the test from a clean cache
will pass and the second will fail. Set GOCACHE to a temporary directory
in the test to use a clean cache and avoid this.
Change-Id: I91f954138a4723d81545134441148badbfc515f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/448018 Reviewed-by: Bryan Mills <bcmills@google.com> Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Michael Pratt [Wed, 2 Nov 2022 15:11:03 +0000 (11:11 -0400)]
cmd/compile/internal/pgo: match on call line offsets
Rather than matching calls to edges in the profile based directly on
line number in the source file, use the line offset from the start of
the function. This makes matching robust to changes in the source file
above the function containing the call.
The start line in the profile comes from Function.start_line, which is
included in Go pprof output since CL 438255.
Currently it is an error if no samples set start_line to help users
detect profiles missing this information. In the future, we should
fallback to using absolute lines, which is better than nothing.
For #55022.
Change-Id: Ie621950cfee1fef8fb200907a2a3f1ded41d04fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/447315 Reviewed-by: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Michael Pratt <mpratt@google.com>
Auto-Submit: Michael Pratt <mpratt@google.com>
Cherry Mui [Fri, 4 Nov 2022 01:22:44 +0000 (21:22 -0400)]
cmd/compile/internal/pgo: check repeated edge only when node is seen
When adding weights for a call stack, for recursive calls, to
avoid double counting we check if we already saw the node and the
edge. We check the node first. An edge can be repeated if the node
is repeated. Most stacks are not recursive, so check repeated edge
only conditionally.
Change-Id: I4b8f039289dcd3383ca89593d6d16d903b94c3dd
Reviewed-on: https://go-review.googlesource.com/c/go/+/447804
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cherry Mui <cherryyz@google.com> Reviewed-by: Michael Pratt <mpratt@google.com>
Austin Clements [Fri, 21 Oct 2022 19:18:14 +0000 (15:18 -0400)]
misc/cgo/test: simplify for module mode
When we were first introducing module mode, CL 163418 moved many of
the tests in misc/cgo/test into their own test binary under testdata
so misc/cgo/test continued to work in both GOPATH mode and module
mode. This introduce a somewhat complicated test driver into
misc/cgo/test. Since the misc/cgo/test test had to invoke "go test" as
a subprocess, this required care to thread any build flags down into
the subprocess. The output from any failures of the sub-process was
also less than ideal.
Now that we don't have to worry about running these in GOPATH mode any
more, this CL moves all of the tests back into misc/cgo/test and drops
the test driver.
There are two slight complications:
- Test41761 was added after this split and has a C type "S" that's
also present in misc/cgo/test itself. We rename that to keep that
test working.
- TestCgo in go/internal/srcimporter now fails to import misc/cgo/test
because misc/cgo/test now contains imports of other "misc" module
packages and the importer it sets up isn't configured to allow that.
We fix this by setting up a build context that's configured for
this.
Cherry Mui [Fri, 4 Nov 2022 00:56:21 +0000 (20:56 -0400)]
cmd/compile/internal/pgo: use slices for in/out edges
Currently in the pprof Graph, a Node's in/out edges are
represented as maps, keyed by the source/destination Nodes. For a
Node it usually has a very small number of edges, so linear search
would be generally faster than map operations. Use slices and
linear search instead.
Change-Id: I5ab06be0c019373cd3a845b9f3282731372e9c4c
Reviewed-on: https://go-review.googlesource.com/c/go/+/447802 Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Cherry Mui [Fri, 4 Nov 2022 00:33:34 +0000 (20:33 -0400)]
cmd/compile/internal/pgo: remove some unused fields
We intentionally don't use file path so it is resilient to code
moving. OrigName and Objfile are also not used currently. Remove
them. (We can add them back if it turns out to be useful.)
Change-Id: I7975d78c874bc21475b9119301088452a4426cb9
Reviewed-on: https://go-review.googlesource.com/c/go/+/447801 Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
David Chase [Fri, 4 Nov 2022 15:23:12 +0000 (11:23 -0400)]
cmd/compile: change the multiple (gossa)hash separator from ; to /
Semicolon has bad copy-paste ergonomics; it requires quoting.
Slash is okay, and won't be a separator ever in debug strings
because it is already used in e.g. ssa/phase/debug=etc.
Change-Id: I493360e9282666eea1a342971a77df2ebd6c92ad
Reviewed-on: https://go-review.googlesource.com/c/go/+/447975 Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com> Reviewed-by: Keith Randall <khr@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Cherry Mui [Fri, 4 Nov 2022 17:54:59 +0000 (13:54 -0400)]
cmd/compile: fix PGO cross-package inlining
With CL 447015, we identify hot callees from edge weights, but
the code only traverses edges for calls from the current package.
If the callee is in a different package, when compiling that
package, the edge was not visited, so the callee was not actually
marked inline candidate. This CL fixes it by traversing all hot
edges.
Change-Id: If668c1a16ebe34e3474376b88ab3a84be76b8562
Reviewed-on: https://go-review.googlesource.com/c/go/+/448015
Run-TryBot: Cherry Mui <cherryyz@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Michael Pratt <mpratt@google.com>
cuiweixie [Fri, 4 Nov 2022 02:48:39 +0000 (10:48 +0800)]
api: add newline to 55301.txt
Change-Id: I9bcaba0ca9c30b204bf126dbfec4cd48d9ebe2ea
Reviewed-on: https://go-review.googlesource.com/c/go/+/447896 Reviewed-by: Than McIntosh <thanm@google.com> Reviewed-by: Robert Findley <rfindley@google.com> Reviewed-by: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Than McIntosh <thanm@google.com>
Run-TryBot: xie cui <523516579@qq.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Eli Bendersky [Thu, 3 Nov 2022 19:16:06 +0000 (12:16 -0700)]
text/template/parse: fix interaction of break/continue keywords and functions
Fixes a bug that was introduced in CL 410414; in that CL, to avoid
a race condition in the initialization of the lexer, the setting
of the breakOK and continueOK options was moved to before
Tree.funcs was populated from parameters. As a result, the parser
missed the fact that 'break' and 'continue' were defined as functions.
Following CL 421883 race conditions are no longer an issue, so
the simplest fix is just to move the initialization where it was
before - in startParse, after t.funcs has been set.
Fixes #56538
Change-Id: I3b99fe9ad12255a4f6eb9a00eb3f64529ff055c0
Reviewed-on: https://go-review.googlesource.com/c/go/+/447775
Run-TryBot: Eli Bendersky <eliben@golang.org>
Auto-Submit: Eli Bendersky <eliben@golang.org> Reviewed-by: Rob Pike <r@golang.org> Reviewed-by: Eli Bendersky <eliben@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Ian Lance Taylor <iant@google.com>
cuiweixie [Sun, 23 Oct 2022 00:41:38 +0000 (08:41 +0800)]
net: add ControlContext to Dialer
Fixes #55301
Change-Id: Ie8abcd383eee9af75038bde908ac638f43d33b7e
Reviewed-on: https://go-review.googlesource.com/c/go/+/444955 Reviewed-by: Bryan Mills <bcmills@google.com> Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: xie cui <523516579@qq.com>
Matthew Dempsky [Thu, 3 Nov 2022 18:02:51 +0000 (11:02 -0700)]
os/exec: allow NUL in environment variables on Plan 9
Plan 9 uses NUL as os.PathListSeparator, so it's almost always going
to appear in the environment variable list. Exempt GOOS=plan9 from the
check for NUL in environment variables.
For #56284.
Fixes #56544.
Change-Id: I23df233cdf20c0a9a606fd9253e15a9b5482575a
Reviewed-on: https://go-review.googlesource.com/c/go/+/447715 Reviewed-by: David du Colombier <0intro@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Damien Neil <dneil@google.com>
Ian Lance Taylor [Thu, 3 Nov 2022 20:22:37 +0000 (13:22 -0700)]
testing: add Get method for -test.v option
There is existing code that calls flag.Lookup("test.v") and inspects
the value. That stopped working as of CL 443596. Make code like that
continue to work at least for the case where we aren't using
-test.v=test2json.
Change-Id: Idb30b149b48ee3987a201e349cf4d9bfe9ddee56
Reviewed-on: https://go-review.googlesource.com/c/go/+/447796
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Auto-Submit: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Russ Cox <rsc@golang.org> Reviewed-by: Bryan Mills <bcmills@google.com>
Paul E. Murphy [Mon, 12 Jul 2021 21:53:22 +0000 (16:53 -0500)]
cmd/link: support PPC64 prefixed relocations for power10
Handle emitting (to ld) or resolving commonly used ELFv2 1.5
relocations. The new ISA provides PC relative addressing with
34 bit signed addresses, and many other relocations which can
replace addis + d-form type relocations with a single prefixed
instruction.
Updates #44549
Change-Id: I7d4f4314d1082daa3938f4353826739be35b0e81
Reviewed-on: https://go-review.googlesource.com/c/go/+/355149 Reviewed-by: Cherry Mui <cherryyz@google.com> Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gopher Robot <gobot@golang.org> Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Paul Murphy <murp@ibm.com>