cmd/compile: mark anonymous receiver parameters as non-escaping

This was already done for normal parameters, and the same logic
applies for receiver parameters too.

Updates #24305.

Change-Id: Ia2a46f68d14e8fb62004ff0da1db0f065a95a1b7
Reviewed-on: https://go-review.googlesource.com/99335
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

cmd/cover: don't crash on non-gofmt'ed input

Without the change to cover.go, the new test fails with

panic: overlapping edits: [4946,4950)->"", [4947,4947)->"thisNameMustBeVeryLongToCauseOverflowOfCounterIncrementStatementOntoNextLineForTest.Count[112]++;"

The original code inserts "else{", deletes "else", and then positions
a new block just after the "}" that must come before the "else".
That works on gofmt'ed code, but fails if the code looks like "}else".
When there is no space between the "{" and the "else", the new block
is inserted into a location that we are deleting, leading to the
"overlapping edits" mentioned above.

This CL fixes this case by not deleting the "else" but just using the
one that is already there. That requires adjust the block offset to
come after the "{" that we insert.

Fixes #23927

Change-Id: I40ef592490878765bbce6550ddb439e43ac525b2
Reviewed-on: https://go-review.googlesource.com/98935
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>

runtime: get traceback from VDSO code

Currently if a profiling signal arrives while executing within a VDSO
the profiler will report _ExternalCode, which is needlessly confusing
for a pure Go program. Change the VDSO calling code to record the
caller's PC/SP, so that we can do a traceback from that point. If that
fails for some reason, report _VDSO rather than _ExternalCode, which
should at least point in the right direction.

This adds some instructions to the code that calls the VDSO, but the
slowdown is reasonably negligible:

name                                  old time/op  new time/op  delta
ClockVDSOAndFallbackPaths/vDSO-8      40.5ns ± 2%  41.3ns ± 1%  +1.85%  (p=0.002 n=10+10)
ClockVDSOAndFallbackPaths/Fallback-8  41.9ns ± 1%  43.5ns ± 1%  +3.84%  (p=0.000 n=9+9)
TimeNow-8                             41.5ns ± 3%  41.5ns ± 2%    ~     (p=0.723 n=10+10)

Fixes #24142

Change-Id: Iacd935db3c4c782150b3809aaa675a71799b1c9c
Reviewed-on: https://go-review.googlesource.com/97315
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>

runtime: change from rt_sigaction to sigaction

This normalizes the Linux code to act like other targets. The size
argument to the rt_sigaction system call is pushed to a single
function, sysSigaction.

This is intended as a simplification step for CL 93875 for #14327.

Change-Id: I594788e235f0da20e16e8a028e27ac8c883907c4
Reviewed-on: https://go-review.googlesource.com/99077
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>

cmd/dist: skip rebuild before running tests when on the build systems

Updates #24300

Change-Id: I7752dab67e15a6dfe5fffe5b5ccbf3373bbc2c13
Reviewed-on: https://go-review.googlesource.com/99296
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

math/big: implement addMulVVW on arm64

The lack of proper addMulVVW implementation for arm64 hurts RSA performance.

This assembly implementation is optimized for arm64 based servers.

name                  old time/op    new time/op     delta
pkg:math/big goos:linux goarch:arm64
AddMulVVW/1             55.2ns ± 0%     11.9ns ± 1%    -78.37%  (p=0.000 n=8+10)
AddMulVVW/2             67.0ns ± 0%     11.2ns ± 0%    -83.28%  (p=0.000 n=7+10)
AddMulVVW/3             93.2ns ± 0%     13.2ns ± 0%    -85.84%  (p=0.000 n=10+10)
AddMulVVW/4              126ns ± 0%       13ns ± 1%    -89.82%  (p=0.000 n=10+10)
AddMulVVW/5              151ns ± 0%       17ns ± 0%    -88.87%  (p=0.000 n=10+9)
AddMulVVW/10             323ns ± 0%       25ns ± 0%    -92.20%  (p=0.000 n=10+10)
AddMulVVW/100           3.28µs ± 0%     0.14µs ± 0%    -95.82%  (p=0.000 n=10+10)
AddMulVVW/1000          31.7µs ± 0%      1.3µs ± 0%    -96.00%  (p=0.000 n=10+8)
AddMulVVW/10000          313µs ± 0%       13µs ± 0%    -95.98%  (p=0.000 n=10+10)
AddMulVVW/100000        3.24ms ± 0%     0.13ms ± 1%    -96.13%  (p=0.000 n=9+9)
pkg:crypto/rsa goos:linux goarch:arm64
RSA2048Decrypt          44.7ms ± 0%      4.0ms ± 6%    -91.08%  (p=0.000 n=8+10)
RSA2048Sign             46.3ms ± 0%      5.0ms ± 0%    -89.29%  (p=0.000 n=9+10)
3PrimeRSA2048Decrypt    22.3ms ± 0%      2.4ms ± 0%    -89.26%  (p=0.000 n=10+10)

Change-Id: I295f0bd5c51a4442d02c44ece1f6026d30dff0bc
Reviewed-on: https://go-review.googlesource.com/76270
Reviewed-by: Vlad Krasnov <vlad@cloudflare.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Vlad Krasnov <vlad@cloudflare.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

cmd/go: skip TestVetWithOnlyCgoFiles when cgo is disabled

CL 99175 added TestVetWithOnlyCgoFiles. However, this
test is failing on platforms where cgo is disabled,
because no file can be built.

This change fixes TestVetWithOnlyCgoFiles by skipping
this test when cgo is disabled.

Fixes #24304.

Change-Id: Ibb38fcd3e0ed1a791782145d3f2866f12117c6fe
Reviewed-on: https://go-review.googlesource.com/99275
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

runtime/cgo: make sure nil is undefined before defining it

While working on standalone builds of gomobile bindings, I ran into
errors on the form:

gcc_darwin_arm.c:30:31: error: ambiguous expansion of macro 'nil' [-Werror,-Wambiguous-macro]
/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS11.2.sdk/usr/include/MacTypes.h:94:15: note: expanding this definition of 'nil'

Fix it by undefining nil before defining it in libcgo.h.

Change-Id: I8e9660a68c6c351e592684d03d529f0d182c0493
Reviewed-on: https://go-review.googlesource.com/99215
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

cmd/go: run vet on packages with only cgo files

CgoFiles is not included in GoFiles, so we need to check both.

Fixes #24193

Change-Id: I6a67bd912e3d9a4be0eae8fa8db6fa8a07fb5df3
Reviewed-on: https://go-review.googlesource.com/99175
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

cmd/compile: prevent untyped types from reaching walk

We already require expressions to have already been typechecked before
reaching walk. Moreover, all untyped expressions should have been
converted to their default type by walk.

However, in practice, we've been somewhat sloppy and inconsistent
about ensuring this. In particular, a lot of AST rewrites ended up
leaving untyped bool expressions scattered around. These likely aren't
harmful in practice, but it seems worth cleaning up.

The two most common cases addressed by this CL are:

1) When generating OIF and OFOR nodes, we would often typecheck the
conditional expression, but not apply defaultlit to force it to the
expression's default type.

2) When rewriting string comparisons into more fundamental primitives,
we were simply overwriting r.Type with the desired type, which didn't
propagate the type to nested subexpressions. These are fixed by
utilizing finishcompare, which correctly handles this (and is already
used by other comparison lowering rewrites).

Lastly, walkexpr is extended to assert that it's not called on untyped
expressions.

Fixes #23834.

Change-Id: Icbd29648a293555e4015d3b06a95a24ccbd3f790
Reviewed-on: https://go-review.googlesource.com/98337
Reviewed-by: Robert Griesemer <gri@golang.org>

cmd/compile: go fmt

Change-Id: I2eae33928641c6ed74badfe44d079ae90e5cc8c8
Reviewed-on: https://go-review.googlesource.com/99195
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

test/codegen: fix issue with arm64 memmove codegen test

This recently added arm64 memmove codegen check:

  func movesmall() {
    // arm64:-"memmove"
    x := [...]byte{1, 2, 3, 4, 5, 6, 7}
    copy(x[1:], x[:])
  }

is not correct, for two reasons:

1. regexps are matched from the start of the disasm line (excluding
   line information). This mean that a negative -"memmove" check will
   pass against a 'CALL runtime.memmove' line because the line does
   not start with 'memmove' (its starts with CALL...).
   The way to specify no 'memmove' match whatsoever on the line is
   -".*memmove"

2. AFAIK comments on their own line are matched against the first
   subsequent non-comment line. So the code above only verifies that
   the x := ... line does not generate a memmove. The comment should
   be moved near the copy() line, if it's that one we want to not
   generate a memmove call.

The fact that the test above is not effective can be checked by
running `go run run.go -v codegen` in the toplevel test directory with
a go1.10 toolchain (that does not have the memmove-elision
optimization). The test will still pass (it shouldn't).

This change changes the regexp to -".*memmove" and moves it near the
line it needs to (not)match.

Change-Id: Ie01ef4d775e77d92dc8d8b7856b89b200f5e5ef2
Reviewed-on: https://go-review.googlesource.com/98977
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

debug/pe: use bytes.IndexByte instead of a loop

Follow CL 98759

Change-Id: I58c8b769741b395e5bf4e723505b149d063d492a
Reviewed-on: https://go-review.googlesource.com/99095
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

database/sql: fix typo in comment

Change-Id: Ie2966bae1dc2e542c42fb32d8059a4b2d4690014
Reviewed-on: https://go-review.googlesource.com/99115
Reviewed-by: Ian Lance Taylor <iant@golang.org>

cmd/trace: force GC occassionally

to return memory to the OS after completing potentially
large operations.

Update #21870

Sys went down to 3.7G

$ DEBUG_MEMORY_USAGE=1 go tool trace trace.out

2018/03/07 09:35:52 Parsing trace...
after parsing trace
 Alloc: 3385754360 Bytes
 Sys: 3662047864 Bytes
 HeapReleased: 0 Bytes
 HeapSys: 3488907264 Bytes
 HeapInUse: 3426549760 Bytes
 HeapAlloc: 3385754360 Bytes
Enter to continue...
2018/03/07 09:36:09 Splitting trace...
after spliting trace
 Alloc: 3238309424 Bytes
 Sys: 3684410168 Bytes
 HeapReleased: 0 Bytes
 HeapSys: 3488874496 Bytes
 HeapInUse: 3266461696 Bytes
 HeapAlloc: 3238309424 Bytes
Enter to continue...
2018/03/07 09:36:39 Opening browser. Trace viewer is listening on http://100.101.224.241:12345

after httpJsonTrace
 Alloc: 3000633872 Bytes
 Sys: 3693978424 Bytes
 HeapReleased: 0 Bytes
 HeapSys: 3488743424 Bytes
 HeapInUse: 3030966272 Bytes
 HeapAlloc: 3000633872 Bytes
Enter to continue...

Change-Id: I56f64cae66c809cbfbad03fba7bd0d35494c1d04
Reviewed-on: https://go-review.googlesource.com/92376
Reviewed-by: Peter Weinberger <pjw@google.com>

go/build: correct value of .Doc field

Build could use the package comment from test files to populate the .Doc
field on *Package.

As go list uses this data and several packages in the standard library
have tests with package comments, this lead to:

$ go list -f '{{.Doc}}' flag container/heap image
These examples demonstrate more intricate uses of the flag package.
This example demonstrates an integer heap built using the heap interface.
This example demonstrates decoding a JPEG image and examining its pixels.

This change now only examines non-test files when attempting to populate
.Doc, resulting in the expected behavior:

$ gotip list -f '{{.Doc}}' flag container/heap image
Package flag implements command-line flag parsing.
Package heap provides heap operations for any type that implements heap.Interface.
Package image implements a basic 2-D image library.

Fixes #23594

Change-Id: I37171c26ec5cc573efd273556a05223c6f675968
Reviewed-on: https://go-review.googlesource.com/96976
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

cmd/trace: generate jsontrace data in a streaming fashion

Update #21870

The Sys went down to 4.25G from 6.2G.

$ DEBUG_MEMORY_USAGE=1 go tool trace trace.out
2018/03/07 08:49:01 Parsing trace...
after parsing trace
 Alloc: 3385757184 Bytes
 Sys: 3661195896 Bytes
 HeapReleased: 0 Bytes
 HeapSys: 3488841728 Bytes
 HeapInUse: 3426516992 Bytes
 HeapAlloc: 3385757184 Bytes
Enter to continue...
2018/03/07 08:49:18 Splitting trace...
after spliting trace
 Alloc: 2352071904 Bytes
 Sys: 4243825464 Bytes
 HeapReleased: 0 Bytes
 HeapSys: 4025712640 Bytes
 HeapInUse: 2377703424 Bytes
 HeapAlloc: 2352071904 Bytes
Enter to continue...
after httpJsonTrace
 Alloc: 3228697832 Bytes
 Sys: 4250379064 Bytes
 HeapReleased: 0 Bytes
 HeapSys: 4025647104 Bytes
 HeapInUse: 3260014592 Bytes
 HeapAlloc: 3228697832 Bytes

Change-Id: I546f26bdbc68b1e58f1af1235a0e299dc0ff115e
Reviewed-on: https://go-review.googlesource.com/92375
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

runtime: add missing build constraints to os_linux_{be64,noauxv,novdso,ppc64x}.go files

They do not match the file name patterns of
  *_GOOS
  *_GOARCH
  *_GOOS_GOARCH
therefore the implicit linux constraint was not being added.

Change-Id: Ie506c51cee6818db445516f96fffaa351df62cf5
Reviewed-on: https://go-review.googlesource.com/99116
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

androidtest.bash: don't require GOARCH set

The host GOARCH is most likely supported (386, amd64, arm, arm64).

Change-Id: I86324b9c00f22c592ba54bda7d2ae97c86bda904
Reviewed-on: https://go-review.googlesource.com/99155
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>

os: use WIN32_FIND_DATA.Reserved0 to identify symlinks

os.Stat implementation uses instructions described at
https://blogs.msdn.microsoft.com/oldnewthing/20100212-00/?p=14963/
to distinguish symlinks. In particular, it calls
GetFileAttributesEx or FindFirstFile and checks
either WIN32_FILE_ATTRIBUTE_DATA.dwFileAttributes
or WIN32_FIND_DATA.dwFileAttributes to see if
FILE_ATTRIBUTES_REPARSE_POINT flag is set.
And that seems to worked fine so far.

But now we discovered that OneDrive root folder
is determined as directory:

c:\>dir C:\Users\Alex | grep OneDrive
30/11/2017  07:25 PM    <DIR>          OneDrive
c:\>

while Go identified it as symlink.

But we did not follow Microsoft's advice to the letter - we never
checked WIN32_FIND_DATA.Reserved0. And adding that extra check
makes Go treat OneDrive as symlink. So use FindFirstFile and
WIN32_FIND_DATA.Reserved0 to determine symlinks.

Fixes #22579

Change-Id: I0cb88929eb8b47b1d24efaf1907ad5a0e20de83f
Reviewed-on: https://go-review.googlesource.com/86556
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

cmd/compile: remove funcdepth variables

There were only two large classes of use for these variables:

1) Testing "funcdepth != 0" or "funcdepth > 0", which is equivalent to
checking "Curfn != nil".

2) In oldname, detecting whether a closure variable has been created
for the current function, which can be handled by instead testing
"n.Name.Curfn != Curfn".

Lastly, merge funcstart into funchdr, since it's only called once, and
it better matches up with funcbody now.

Passes toolstash-check.

Change-Id: I8fe159a9d37ef7debc4cd310354cea22a8b23394
Reviewed-on: https://go-review.googlesource.com/99076
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

cmd/compile: cleanup funccompile and compile

Bring these functions next to each other, and clean them up a little
bit. Also, change emitptrargsmap to take Curfn as a parameter instead
of a global.

Passes toolstash-check.

Change-Id: Ib9c94fda3b2cb6f0dcec1585622b33b4f311b5e9
Reviewed-on: https://go-review.googlesource.com/99075
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

cmd/compile: prevent detection of wrong duplicates

by including *types.Type in typeVal.

Updates #21866
Fixes #24159

Change-Id: I2f8cac252d88d43e723124f2867b1410b7abab7b
Reviewed-on: https://go-review.googlesource.com/98476
Run-TryBot: Kunpei Sakai <namusyaka@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>

cmd/compile: fix miscompilation of "defer delete(m, k)"

Previously, for slow map key types (i.e., any type other than a 32-bit
or 64-bit plain memory type), we would rewrite

    defer delete(m, k)

into

    ktmp := k
    defer delete(m, &ktmp)

However, if the defer statement was inside a loop, we would end up
reusing the same ktmp value for all of the deferred deletes.

We already rewrite

    defer print(x, y, z)

into

    defer func(a1, a2, a3) {
        print(a1, a2, a3)
    }(x, y, z)

This CL generalizes this rewrite to also apply for slow map deletes.

This could be extended to apply even more generally to other builtins,
but as discussed on #24259, there are cases where we must *not* do
this (e.g., "defer recover()"). However, if we elect to do this more
generally, this CL should still make that easier.

Lastly, while here, fix a few isues in wrapCall (nee walkprintfunc):

1) lookupN appends the generation number to the symbol anyway, so "%d"
was being literally included in the generated function names.

2) walkstmt will be called when the function is compiled later anyway,
so no need to do it now.

Fixes #24259.

Change-Id: I70286867c64c69c18e9552f69e3f4154a0fc8b04
Reviewed-on: https://go-review.googlesource.com/99017
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

internal/poll: if poller init fails, assume blocking mode

Fixes #23943

Change-Id: I16e604872f1615963925ec3c4710106bcce1330c
Reviewed-on: https://go-review.googlesource.com/99015
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

cmd/compile: improve compiler error on embedded structs

Fixes #23609

Change-Id: I751aae3d849de7fce1306324fcb1a4c3842d873e
Reviewed-on: https://go-review.googlesource.com/97076
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

test/codegen: port math/bits.ReverseBytes tests to codegen

And remove them from ssa_test.

Change-Id: If767af662801219774d1bdb787c77edfa6067770
Reviewed-on: https://go-review.googlesource.com/98976
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>

cmd/compile/internal/ssa: improve store combine optimization on arm64

Current implementation doesn't consider MOVDreg type operand and fail to combine
it into larger store. This patch fixes the issue.

Fixes #24242

Change-Id: I7d68697f80e76f48c3528ece01a602bf513248ec
Reviewed-on: https://go-review.googlesource.com/98397
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

encoding/binary: use an offset instead of slicing

While running make.bash, over 5% of all pointer writes
come from encoding/binary doing struct reads.

This change replaces slicing during such reads with an offset.
This avoids updating the slice pointer with every
struct field read or write.

This has no impact when the write barrier is off.
Running the benchmarks with GOGC=1, however,
shows significant improvement:

name          old time/op    new time/op    delta
ReadStruct-8    13.2µs ± 6%    10.1µs ± 5%  -23.24%  (p=0.000 n=10+10)

name          old speed      new speed      delta
ReadStruct-8  5.69MB/s ± 6%  7.40MB/s ± 5%  +30.18%  (p=0.000 n=10+10)

Change-Id: I22904263196bfeddc38abe8989428e263aee5253
Reviewed-on: https://go-review.googlesource.com/98757
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

runtime: skip pointless writes in freedefer

Change-Id: I501a0e5c87ec88616c7dcdf1b723758b6df6c088
Reviewed-on: https://go-review.googlesource.com/98758
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

debug/macho: use bytes.IndexByte instead of a loop

Simpler, and no doubt faster.

Change-Id: Idd401918da07a257de365087721e9ff061e6fd07
Reviewed-on: https://go-review.googlesource.com/98759
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

cmd/compile/internal/ssa: inline small memmove for arm64

This patch enables the optimization for arm64 target.

Performance results on Amberwing for strconv benchmark:
name             old time/op  new time/op  delta
Quote             721ns ± 0%   617ns ± 0%  -14.40%  (p=0.016 n=5+4)
QuoteRune         118ns ± 0%   117ns ± 0%   -0.85%  (p=0.008 n=5+5)
AppendQuote       436ns ± 2%   321ns ± 0%  -26.31%  (p=0.008 n=5+5)
AppendQuoteRune  34.7ns ± 0%  28.4ns ± 0%  -18.16%  (p=0.000 n=5+4)
[Geo mean]        189ns        160ns       -15.41%

Change-Id: I5714c474e7483d07ca338fbaf49beb4bbcc11c44
Reviewed-on: https://go-review.googlesource.com/98735
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

test/codegen: port math/bits.OnesCount tests to codegen

And remove them from ssa_test.

Change-Id: I3efac5fea529bb0efa2dae32124530482ba5058e
Reviewed-on: https://go-review.googlesource.com/98815
Reviewed-by: Keith Randall <khr@golang.org>

cmd/internal/obj/arm64: gofmt

Change-Id: Ica778fef2d0245fbb14f595597e45c7cf6adef84
Reviewed-on: https://go-review.googlesource.com/98895
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

iostest.bash: don't build std library twice

Instead, mirror androidtest.bash and build once, then run run.bash.

Change-Id: I174ae30b2a429a62b20bb290a70cb07ed712b1e4
Reviewed-on: https://go-review.googlesource.com/98915
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

cmd/dist: default to GOARM=7 on android

Auto-detecting GOARM on Android makes as little sense as for nacl/arm
and darwin/arm.

Also update androidtest.sh to not require GOARM set.

Change-Id: Id409ce1573d3c668d00fa4b7e3562ad7ece6fef5
Reviewed-on: https://go-review.googlesource.com/98875
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>
Run-TryBot: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

math/big: don't use R18 in ARM64 assembly

R18 seems reserved on Apple platforms.

May fix darwin/arm64 build.

Change-Id: Ia2c1de550a64827c85a64affa53b94c62aacce8e
Reviewed-on: https://go-review.googlesource.com/98896
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Elias Naur <elias.naur@gmail.com>

runtime: fix stack switch check in walltime/nanotime on linux/arm

CL 98095 got the check wrong. We should be testing
'getg() == getg().m.curg', not 'getg().m == getg().m.curg'.

Change-Id: I32f6238b00409b67afa8efe732513d542aec5bc7
Reviewed-on: https://go-review.googlesource.com/98855
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

test/codegen: port math/bits.TrailingZeros tests to codegen

And remove them from ssa_test.

Change-Id: Ib5de5c0d908f23915e0847eca338cacf2fa5325b
Reviewed-on: https://go-review.googlesource.com/98795
Reviewed-by: Giovanni Bajo <rasky@develer.com>

net/http: correct subtle transposition of offset and whence in test

Change-Id: I788972bdf85c0225397c0e74901bf9c33c6d30c7
GitHub-Last-Rev: 57737fe782bf7ad2d765c2efd80d75b3baca2c7b
GitHub-Pull-Request: golang/go#24265
Reviewed-on: https://go-review.googlesource.com/98761
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

runtime, cmd/compile: use ldp for DUFFCOPY on ARM64

name         old time/op  new time/op  delta
CopyFat8     2.15ns ± 1%  2.19ns ± 6%     ~     (p=0.171 n=8+9)
CopyFat12    2.15ns ± 0%  2.17ns ± 2%     ~     (p=0.137 n=8+10)
CopyFat16    2.17ns ± 3%  2.15ns ± 0%     ~     (p=0.211 n=10+10)
CopyFat24    2.16ns ± 1%  2.15ns ± 0%     ~     (p=0.087 n=10+10)
CopyFat32    11.5ns ± 0%  12.8ns ± 2%  +10.87%  (p=0.000 n=8+10)
CopyFat64    20.2ns ± 2%  12.9ns ± 0%  -36.11%  (p=0.000 n=10+10)
CopyFat128   37.2ns ± 0%  21.5ns ± 0%  -42.20%  (p=0.000 n=10+10)
CopyFat256   71.6ns ± 0%  38.7ns ± 0%  -45.95%  (p=0.000 n=10+10)
CopyFat512    140ns ± 0%    73ns ± 0%  -47.86%  (p=0.000 n=10+9)
CopyFat520    142ns ± 0%    74ns ± 0%  -47.54%  (p=0.000 n=10+10)
CopyFat1024   277ns ± 0%   141ns ± 0%  -49.10%  (p=0.000 n=10+10)

Change-Id: If54bc571add5db674d5e081579c87e80153d0a5a
Reviewed-on: https://go-review.googlesource.com/97395
Reviewed-by: Cherry Zhang <cherryyz@google.com>

cmd/doc: make local dot-slash path names work

Before, an argument that started ./ or ../ was not treated as
a package relative to the current directory. Thus

$ cd $GOROOT/src/text
$ go doc ./template

could find html/template as $GOROOT/src/html/./template
is a valid Go source directory.

Fix this by catching such paths and making them absolute before
processing.

Fixes #23383.

Change-Id: Ic2a92eaa3a6328f728635657f9de72ac3ee82afb
Reviewed-on: https://go-review.googlesource.com/98396
Reviewed-by: Ian Lance Taylor <iant@golang.org>

crypto/aes: optimize arm64 AES implementation

This patch makes use of arm64 AES instructions to accelerate AES computation
and only supports optimization on Linux for arm64

name        old time/op    new time/op     delta
Encrypt-32     255ns ± 0%       26ns ± 0%   -89.73%
Decrypt-32     256ns ± 0%       26ns ± 0%   -89.77%
Expand-32      990ns ± 5%      901ns ± 0%    -9.05%

name        old speed      new speed       delta
Encrypt-32  62.5MB/s ± 0%  610.4MB/s ± 0%  +876.39%
Decrypt-32  62.3MB/s ± 0%  610.2MB/s ± 0%  +879.6%

Fixes #18498

Change-Id: If416e5a151785325527b32ff72f6da3812493ed0
Reviewed-on: https://go-review.googlesource.com/64490
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

math/big: optimize addVV and subVV on arm64

The biggest hot spot of the existing implementation is "load" operations, which lead to poor performance.
By unrolling the cycle 4x and 2x, and using "LDP", "STP" instructions, this CL can reduce the "load" cost and improve performance.

Benchmarks:

name                              old time/op    new time/op     delta
AddVV/1-8                           21.5ns ± 0%     11.5ns ± 0%   -46.51%  (p=0.008 n=5+5)
AddVV/2-8                           13.5ns ± 0%     12.0ns ± 0%   -11.11%  (p=0.008 n=5+5)
AddVV/3-8                           15.5ns ± 0%     13.0ns ± 0%   -16.13%  (p=0.008 n=5+5)
AddVV/4-8                           17.5ns ± 0%     13.5ns ± 0%   -22.86%  (p=0.008 n=5+5)
AddVV/5-8                           19.5ns ± 0%     14.5ns ± 0%   -25.64%  (p=0.008 n=5+5)
AddVV/10-8                          29.5ns ± 0%     18.0ns ± 0%   -38.98%  (p=0.008 n=5+5)
AddVV/100-8                          217ns ± 0%       94ns ± 0%   -56.64%  (p=0.008 n=5+5)
AddVV/1000-8                        2.02µs ± 0%     1.03µs ± 0%   -48.85%  (p=0.008 n=5+5)
AddVV/10000-8                       20.5µs ± 0%     11.3µs ± 0%   -44.70%  (p=0.008 n=5+5)
AddVV/100000-8                       247µs ± 3%      154µs ± 0%   -37.52%  (p=0.008 n=5+5)
SubVV/1-8                           21.5ns ± 0%     11.5ns ± 0%      ~     (p=0.079 n=4+5)
SubVV/2-8                           13.5ns ± 0%     12.0ns ± 0%   -11.11%  (p=0.008 n=5+5)
SubVV/3-8                           15.5ns ± 0%     13.0ns ± 0%   -16.13%  (p=0.008 n=5+5)
SubVV/4-8                           17.5ns ± 0%     13.5ns ± 0%   -22.86%  (p=0.008 n=5+5)
SubVV/5-8                           19.5ns ± 0%     14.5ns ± 0%   -25.64%  (p=0.008 n=5+5)
SubVV/10-8                          29.5ns ± 0%     18.0ns ± 0%   -38.98%  (p=0.008 n=5+5)
SubVV/100-8                          217ns ± 0%       94ns ± 0%   -56.64%  (p=0.008 n=5+5)
SubVV/1000-8                        2.02µs ± 0%     0.80µs ± 0%   -60.50%  (p=0.008 n=5+5)
SubVV/10000-8                       20.5µs ± 0%     11.3µs ± 0%   -44.99%  (p=0.008 n=5+5)
SubVV/100000-8                       221µs ±11%      223µs ±16%      ~     (p=0.690 n=5+5)
AddVW/1-8                           9.32ns ± 0%     9.32ns ± 0%      ~     (all equal)
AddVW/2-8                           19.7ns ± 1%     19.7ns ± 0%      ~     (p=0.381 n=5+4)
AddVW/3-8                           11.5ns ± 0%     11.5ns ± 0%      ~     (all equal)
AddVW/4-8                           13.0ns ± 0%     13.0ns ± 0%      ~     (all equal)
AddVW/5-8                           14.5ns ± 0%     14.5ns ± 0%      ~     (all equal)
AddVW/10-8                          22.0ns ± 0%     22.0ns ± 0%      ~     (all equal)
AddVW/100-8                          167ns ± 0%      167ns ± 0%      ~     (all equal)
AddVW/1000-8                        1.52µs ± 0%     1.52µs ± 0%    +0.40%  (p=0.008 n=5+5)
AddVW/10000-8                       15.1µs ± 0%     15.1µs ± 0%      ~     (p=0.556 n=5+4)
AddVW/100000-8                       152µs ± 1%      152µs ± 1%      ~     (p=0.690 n=5+5)
AddMulVVW/1-8                       33.3ns ± 0%     32.7ns ± 1%    -1.86%  (p=0.008 n=5+5)
AddMulVVW/2-8                       59.3ns ± 1%     56.9ns ± 1%    -4.15%  (p=0.008 n=5+5)
AddMulVVW/3-8                       80.5ns ± 1%     85.4ns ± 3%    +6.19%  (p=0.008 n=5+5)
AddMulVVW/4-8                        127ns ± 0%      111ns ± 1%   -13.19%  (p=0.008 n=5+5)
AddMulVVW/5-8                        144ns ± 0%      149ns ± 0%    +3.47%  (p=0.016 n=4+5)
AddMulVVW/10-8                       298ns ± 1%      283ns ± 0%    -4.77%  (p=0.008 n=5+5)
AddMulVVW/100-8                     3.06µs ± 0%     2.99µs ± 0%    -2.21%  (p=0.008 n=5+5)
AddMulVVW/1000-8                    31.3µs ± 0%     26.9µs ± 0%   -14.17%  (p=0.008 n=5+5)
AddMulVVW/10000-8                    316µs ± 0%      305µs ± 0%    -3.51%  (p=0.008 n=5+5)
AddMulVVW/100000-8                  3.17ms ± 0%     3.17ms ± 1%      ~     (p=0.690 n=5+5)
DecimalConversion-8                  316µs ± 1%      313µs ± 2%      ~     (p=0.095 n=5+5)
FloatString/100-8                   2.53µs ± 1%     2.56µs ± 2%      ~     (p=0.222 n=5+5)
FloatString/1000-8                  58.4µs ± 0%     58.5µs ± 0%      ~     (p=0.206 n=5+5)
FloatString/10000-8                 4.59ms ± 0%     4.58ms ± 0%    -0.31%  (p=0.008 n=5+5)
FloatString/100000-8                 446ms ± 0%      444ms ± 0%    -0.31%  (p=0.008 n=5+5)
FloatAdd/10-8                        184ns ± 0%      172ns ± 0%    -6.30%  (p=0.008 n=5+5)
FloatAdd/100-8                       189ns ± 2%      191ns ± 4%      ~     (p=0.381 n=5+5)
FloatAdd/1000-8                      371ns ± 0%      347ns ± 1%    -6.42%  (p=0.008 n=5+5)
FloatAdd/10000-8                    1.87µs ± 0%     1.68µs ± 0%   -10.16%  (p=0.008 n=5+5)
FloatAdd/100000-8                   17.1µs ± 0%     15.6µs ± 0%    -8.74%  (p=0.016 n=5+4)
FloatSub/10-8                        152ns ± 0%      138ns ± 0%    -9.47%  (p=0.000 n=4+5)
FloatSub/100-8                       148ns ± 0%      142ns ± 0%    -4.05%  (p=0.000 n=5+4)
FloatSub/1000-8                      245ns ± 1%      217ns ± 0%   -11.28%  (p=0.000 n=5+4)
FloatSub/10000-8                    1.07µs ± 0%     0.88µs ± 1%   -18.14%  (p=0.008 n=5+5)
FloatSub/100000-8                   9.58µs ± 0%     7.96µs ± 0%   -16.84%  (p=0.008 n=5+5)
ParseFloatSmallExp-8                28.8µs ± 1%     29.0µs ± 1%      ~     (p=0.095 n=5+5)
ParseFloatLargeExp-8                 126µs ± 1%      126µs ± 1%      ~     (p=0.841 n=5+5)
GCD10x10/WithoutXY-8                 277ns ± 2%      281ns ± 4%      ~     (p=0.746 n=5+5)
GCD10x10/WithXY-8                   2.10µs ± 1%     2.12µs ± 3%      ~     (p=0.548 n=5+5)
GCD10x100/WithoutXY-8                615ns ± 3%      607ns ± 2%      ~     (p=0.135 n=5+5)
GCD10x100/WithXY-8                  3.50µs ± 2%     3.62µs ± 5%      ~     (p=0.151 n=5+5)
GCD10x1000/WithoutXY-8              1.39µs ± 2%     1.39µs ± 3%      ~     (p=0.690 n=5+5)
GCD10x1000/WithXY-8                 7.39µs ± 1%     7.34µs ± 2%      ~     (p=0.135 n=5+5)
GCD10x10000/WithoutXY-8             8.66µs ± 1%     8.68µs ± 1%      ~     (p=0.421 n=5+5)
GCD10x10000/WithXY-8                28.1µs ± 2%     27.0µs ± 2%    -3.81%  (p=0.008 n=5+5)
GCD10x100000/WithoutXY-8            79.3µs ± 1%     79.3µs ± 1%      ~     (p=0.841 n=5+5)
GCD10x100000/WithXY-8                238µs ± 0%      227µs ± 1%    -4.74%  (p=0.008 n=5+5)
GCD100x100/WithoutXY-8              1.89µs ± 1%     1.88µs ± 2%      ~     (p=0.968 n=5+5)
GCD100x100/WithXY-8                 26.7µs ± 1%     27.0µs ± 1%    +1.44%  (p=0.032 n=5+5)
GCD100x1000/WithoutXY-8             4.48µs ± 1%     4.45µs ± 2%      ~     (p=0.341 n=5+5)
GCD100x1000/WithXY-8                36.3µs ± 1%     35.1µs ± 1%    -3.27%  (p=0.008 n=5+5)
GCD100x10000/WithoutXY-8            22.8µs ± 0%     22.7µs ± 1%      ~     (p=0.056 n=5+5)
GCD100x10000/WithXY-8                145µs ± 1%      133µs ± 1%    -8.33%  (p=0.008 n=5+5)
GCD100x100000/WithoutXY-8            198µs ± 0%      195µs ± 0%    -1.56%  (p=0.008 n=5+5)
GCD100x100000/WithXY-8              1.11ms ± 0%     1.00ms ± 0%   -10.04%  (p=0.008 n=5+5)
GCD1000x1000/WithoutXY-8            25.2µs ± 1%     24.8µs ± 1%    -1.63%  (p=0.016 n=5+5)
GCD1000x1000/WithXY-8                513µs ± 0%      517µs ± 2%      ~     (p=0.421 n=5+5)
GCD1000x10000/WithoutXY-8           57.0µs ± 0%     52.7µs ± 1%    -7.56%  (p=0.008 n=5+5)
GCD1000x10000/WithXY-8              1.20ms ± 0%     1.10ms ± 0%    -8.70%  (p=0.008 n=5+5)
GCD1000x100000/WithoutXY-8           358µs ± 0%      318µs ± 1%   -11.03%  (p=0.008 n=5+5)
GCD1000x100000/WithXY-8             8.71ms ± 0%     7.65ms ± 0%   -12.19%  (p=0.008 n=5+5)
GCD10000x10000/WithoutXY-8           690µs ± 0%      630µs ± 0%    -8.71%  (p=0.008 n=5+5)
GCD10000x10000/WithXY-8             16.0ms ± 1%     14.9ms ± 0%    -6.85%  (p=0.008 n=5+5)
GCD10000x100000/WithoutXY-8         2.09ms ± 0%     1.75ms ± 0%   -16.09%  (p=0.016 n=5+4)
GCD10000x100000/WithXY-8            86.8ms ± 0%     76.3ms ± 0%   -12.09%  (p=0.008 n=5+5)
GCD100000x100000/WithoutXY-8        51.1ms ± 0%     46.0ms ± 0%    -9.97%  (p=0.008 n=5+5)
GCD100000x100000/WithXY-8            1.25s ± 0%      1.15s ± 0%    -7.92%  (p=0.008 n=5+5)
Hilbert-8                           2.45ms ± 1%     2.49ms ± 1%    +1.99%  (p=0.008 n=5+5)
Binomial-8                          4.98µs ± 3%     4.90µs ± 2%      ~     (p=0.421 n=5+5)
QuoRem-8                            7.10µs ± 0%     6.21µs ± 0%   -12.55%  (p=0.016 n=5+4)
Exp-8                                161ms ± 0%      161ms ± 0%      ~     (p=0.421 n=5+5)
Exp2-8                               161ms ± 0%      161ms ± 0%      ~     (p=0.151 n=5+5)
Bitset-8                            40.4ns ± 0%     40.3ns ± 0%      ~     (p=0.190 n=5+5)
BitsetNeg-8                          163ns ± 3%      137ns ± 2%   -15.91%  (p=0.008 n=5+5)
BitsetOrig-8                         377ns ± 1%      372ns ± 1%    -1.22%  (p=0.024 n=5+5)
BitsetNegOrig-8                      631ns ± 1%      605ns ± 1%    -4.09%  (p=0.008 n=5+5)
ModSqrt225_Tonelli-8                7.26ms ± 0%     7.26ms ± 0%      ~     (p=0.548 n=5+5)
ModSqrt224_3Mod4-8                  2.24ms ± 0%     2.24ms ± 0%      ~     (p=1.000 n=5+5)
ModSqrt5430_Tonelli-8                62.4s ± 0%      62.4s ± 0%      ~     (p=0.841 n=5+5)
ModSqrt5430_3Mod4-8                  20.8s ± 0%      20.7s ± 0%      ~     (p=0.056 n=5+5)
Sqrt-8                               101µs ± 0%       89µs ± 0%   -12.17%  (p=0.008 n=5+5)
IntSqr/1-8                          32.5ns ± 1%     32.7ns ± 1%      ~     (p=0.056 n=5+5)
IntSqr/2-8                           160ns ± 5%      158ns ± 0%      ~     (p=0.397 n=5+4)
IntSqr/3-8                           298ns ± 4%      296ns ± 4%      ~     (p=0.667 n=5+5)
IntSqr/5-8                           737ns ± 5%      761ns ± 3%    +3.34%  (p=0.016 n=5+5)
IntSqr/8-8                          1.87µs ± 4%     1.90µs ± 3%      ~     (p=0.222 n=5+5)
IntSqr/10-8                         2.96µs ± 4%     2.92µs ± 6%      ~     (p=0.310 n=5+5)
IntSqr/20-8                         6.28µs ± 3%     6.21µs ± 2%      ~     (p=0.310 n=5+5)
IntSqr/30-8                         14.0µs ± 2%     13.9µs ± 2%      ~     (p=0.548 n=5+5)
IntSqr/50-8                         37.7µs ± 3%     38.3µs ± 2%      ~     (p=0.095 n=5+5)
IntSqr/80-8                         95.9µs ± 2%     95.1µs ± 1%      ~     (p=0.310 n=5+5)
IntSqr/100-8                         148µs ± 1%      148µs ± 1%      ~     (p=0.841 n=5+5)
IntSqr/200-8                         586µs ± 1%      587µs ± 1%      ~     (p=1.000 n=5+5)
IntSqr/300-8                        1.32ms ± 0%     1.31ms ± 1%    -0.73%  (p=0.032 n=5+5)
IntSqr/500-8                        2.48ms ± 0%     2.45ms ± 0%    -1.15%  (p=0.008 n=5+5)
IntSqr/800-8                        4.68ms ± 0%     4.62ms ± 0%    -1.23%  (p=0.008 n=5+5)
IntSqr/1000-8                       7.57ms ± 0%     7.50ms ± 0%    -0.84%  (p=0.008 n=5+5)
Mul-8                                311ms ± 0%      308ms ± 0%    -0.81%  (p=0.008 n=5+5)
Exp3Power/0x10-8                     574ns ± 1%      578ns ± 2%      ~     (p=0.500 n=5+5)
Exp3Power/0x40-8                     640ns ± 1%      646ns ± 0%      ~     (p=0.056 n=5+5)
Exp3Power/0x100-8                   1.42µs ± 1%     1.42µs ± 1%      ~     (p=0.246 n=5+5)
Exp3Power/0x400-8                   8.30µs ± 1%     8.29µs ± 1%      ~     (p=0.802 n=5+5)
Exp3Power/0x1000-8                  60.0µs ± 0%     59.9µs ± 0%    -0.24%  (p=0.016 n=5+5)
Exp3Power/0x4000-8                   817µs ± 0%      816µs ± 0%    -0.17%  (p=0.008 n=5+5)
Exp3Power/0x10000-8                 7.80ms ± 1%     7.70ms ± 0%    -1.23%  (p=0.008 n=5+5)
Exp3Power/0x40000-8                 73.4ms ± 0%     72.5ms ± 0%    -1.28%  (p=0.008 n=5+5)
Exp3Power/0x100000-8                 665ms ± 0%      656ms ± 0%    -1.34%  (p=0.008 n=5+5)
Exp3Power/0x400000-8                 5.99s ± 0%      5.90s ± 0%    -1.40%  (p=0.008 n=5+5)
Fibo-8                               116ms ± 0%       50ms ± 0%   -57.09%  (p=0.008 n=5+5)
NatSqr/1-8                           112ns ± 4%      112ns ± 2%      ~     (p=0.968 n=5+5)
NatSqr/2-8                           251ns ± 2%      250ns ± 1%      ~     (p=0.571 n=5+5)
NatSqr/3-8                           378ns ± 2%      379ns ± 2%      ~     (p=0.794 n=5+5)
NatSqr/5-8                           829ns ± 3%      827ns ± 2%      ~     (p=1.000 n=5+5)
NatSqr/8-8                          1.97µs ± 2%     1.95µs ± 2%      ~     (p=0.310 n=5+5)
NatSqr/10-8                         3.02µs ± 2%     2.99µs ± 2%      ~     (p=0.421 n=5+5)
NatSqr/20-8                         6.51µs ± 2%     6.49µs ± 1%      ~     (p=0.841 n=5+5)
NatSqr/30-8                         14.1µs ± 2%     14.0µs ± 2%      ~     (p=0.841 n=5+5)
NatSqr/50-8                         38.1µs ± 2%     38.3µs ± 3%      ~     (p=0.690 n=5+5)
NatSqr/80-8                         95.5µs ± 2%     96.0µs ± 1%      ~     (p=0.421 n=5+5)
NatSqr/100-8                         150µs ± 1%      148µs ± 2%      ~     (p=0.095 n=5+5)
NatSqr/200-8                         588µs ± 1%      590µs ± 1%      ~     (p=0.421 n=5+5)
NatSqr/300-8                        1.32ms ± 1%     1.31ms ± 1%      ~     (p=0.841 n=5+5)
NatSqr/500-8                        2.50ms ± 0%     2.47ms ± 0%    -1.03%  (p=0.008 n=5+5)
NatSqr/800-8                        4.70ms ± 0%     4.64ms ± 0%    -1.31%  (p=0.008 n=5+5)
NatSqr/1000-8                       7.60ms ± 0%     7.52ms ± 0%    -1.01%  (p=0.008 n=5+5)
ScanPi-8                             326µs ± 0%      326µs ± 0%      ~     (p=0.841 n=5+5)
StringPiParallel-8                  70.3µs ± 5%     63.8µs ±10%      ~     (p=0.056 n=5+5)
Scan/10/Base2-8                     1.09µs ± 0%     1.09µs ± 0%      ~     (p=0.317 n=5+5)
Scan/100/Base2-8                    7.79µs ± 0%     7.78µs ± 0%      ~     (p=0.063 n=5+5)
Scan/1000/Base2-8                   79.0µs ± 0%     78.9µs ± 0%    -0.18%  (p=0.008 n=5+5)
Scan/10000/Base2-8                  1.22ms ± 0%     1.22ms ± 0%    -0.15%  (p=0.008 n=5+5)
Scan/100000/Base2-8                 55.1ms ± 0%     55.2ms ± 0%    +0.20%  (p=0.008 n=5+5)
Scan/10/Base8-8                      512ns ± 0%      512ns ± 1%      ~     (p=0.810 n=5+5)
Scan/100/Base8-8                    2.89µs ± 0%     2.89µs ± 0%      ~     (p=0.810 n=5+5)
Scan/1000/Base8-8                   31.0µs ± 0%     31.0µs ± 0%      ~     (p=0.151 n=5+5)
Scan/10000/Base8-8                   740µs ± 0%      741µs ± 0%    +0.10%  (p=0.008 n=5+5)
Scan/100000/Base8-8                 50.6ms ± 0%     50.6ms ± 0%    +0.08%  (p=0.008 n=5+5)
Scan/10/Base10-8                     487ns ± 0%      487ns ± 0%      ~     (p=0.571 n=5+5)
Scan/100/Base10-8                   2.67µs ± 0%     2.67µs ± 0%      ~     (p=0.810 n=5+5)
Scan/1000/Base10-8                  28.7µs ± 0%     28.7µs ± 0%    +0.06%  (p=0.008 n=5+5)
Scan/10000/Base10-8                  716µs ± 0%      717µs ± 0%      ~     (p=0.222 n=5+5)
Scan/100000/Base10-8                50.3ms ± 0%     50.3ms ± 0%    +0.10%  (p=0.008 n=5+5)
Scan/10/Base16-8                     438ns ± 0%      437ns ± 1%      ~     (p=0.786 n=5+5)
Scan/100/Base16-8                   2.47µs ± 0%     2.47µs ± 0%    -0.19%  (p=0.048 n=5+5)
Scan/1000/Base16-8                  27.2µs ± 0%     27.3µs ± 0%      ~     (p=0.087 n=5+5)
Scan/10000/Base16-8                  722µs ± 0%      722µs ± 0%    +0.11%  (p=0.008 n=5+5)
Scan/100000/Base16-8                52.6ms ± 0%     52.7ms ± 0%    +0.15%  (p=0.008 n=5+5)
String/10/Base2-8                    247ns ± 2%      248ns ± 1%      ~     (p=0.437 n=5+5)
String/100/Base2-8                  1.51µs ± 0%     1.51µs ± 0%    -0.37%  (p=0.024 n=5+5)
String/1000/Base2-8                 13.6µs ± 1%     13.5µs ± 0%      ~     (p=0.095 n=5+5)
String/10000/Base2-8                 135µs ± 0%      135µs ± 1%      ~     (p=0.841 n=5+5)
String/100000/Base2-8               1.32ms ± 1%     1.32ms ± 1%      ~     (p=0.690 n=5+5)
String/10/Base8-8                    169ns ± 1%      169ns ± 1%      ~     (p=1.000 n=5+5)
String/100/Base8-8                   636ns ± 0%      634ns ± 1%      ~     (p=0.413 n=5+5)
String/1000/Base8-8                 5.33µs ± 1%     5.32µs ± 0%      ~     (p=0.222 n=5+5)
String/10000/Base8-8                50.9µs ± 1%     50.7µs ± 0%      ~     (p=0.151 n=5+5)
String/100000/Base8-8                500µs ± 1%      497µs ± 0%      ~     (p=0.421 n=5+5)
String/10/Base10-8                   516ns ± 1%      513ns ± 0%    -0.62%  (p=0.016 n=5+4)
String/100/Base10-8                 1.97µs ± 0%     1.96µs ± 0%      ~     (p=0.667 n=4+5)
String/1000/Base10-8                12.5µs ± 0%     11.5µs ± 0%    -7.92%  (p=0.008 n=5+5)
String/10000/Base10-8               57.7µs ± 0%     52.5µs ± 0%    -8.93%  (p=0.008 n=5+5)
String/100000/Base10-8              25.6ms ± 0%     21.6ms ± 0%   -15.94%  (p=0.008 n=5+5)
String/10/Base16-8                   150ns ± 1%      149ns ± 0%      ~     (p=0.413 n=5+4)
String/100/Base16-8                  514ns ± 1%      514ns ± 1%      ~     (p=0.849 n=5+5)
String/1000/Base16-8                4.01µs ± 0%     4.01µs ± 0%      ~     (p=0.421 n=5+5)
String/10000/Base16-8               37.8µs ± 1%     37.8µs ± 1%      ~     (p=0.841 n=5+5)
String/100000/Base16-8               373µs ± 2%      373µs ± 0%      ~     (p=0.421 n=5+5)
LeafSize/0-8                        6.63ms ± 0%     6.63ms ± 0%      ~     (p=0.730 n=4+5)
LeafSize/1-8                        74.0µs ± 0%     67.7µs ± 1%    -8.53%  (p=0.008 n=5+5)
LeafSize/2-8                        74.2µs ± 0%     68.3µs ± 1%    -7.99%  (p=0.008 n=5+5)
LeafSize/3-8                         379µs ± 0%      309µs ± 0%   -18.52%  (p=0.008 n=5+5)
LeafSize/4-8                        72.7µs ± 1%     66.7µs ± 0%    -8.37%  (p=0.008 n=5+5)
LeafSize/5-8                         471µs ± 0%      384µs ± 0%   -18.55%  (p=0.008 n=5+5)
LeafSize/6-8                         378µs ± 0%      308µs ± 0%   -18.59%  (p=0.008 n=5+5)
LeafSize/7-8                         245µs ± 0%      204µs ± 1%   -16.75%  (p=0.008 n=5+5)
LeafSize/8-8                        73.4µs ± 0%     66.9µs ± 1%    -8.79%  (p=0.008 n=5+5)
LeafSize/9-8                         538µs ± 0%      437µs ± 0%   -18.75%  (p=0.008 n=5+5)
LeafSize/10-8                        472µs ± 0%      396µs ± 1%   -16.01%  (p=0.008 n=5+5)
LeafSize/11-8                        460µs ± 0%      374µs ± 0%   -18.58%  (p=0.008 n=5+5)
LeafSize/12-8                        378µs ± 0%      308µs ± 0%   -18.38%  (p=0.008 n=5+5)
LeafSize/13-8                        343µs ± 0%      284µs ± 0%   -17.30%  (p=0.008 n=5+5)
LeafSize/14-8                        248µs ± 0%      206µs ± 0%   -16.94%  (p=0.008 n=5+5)
LeafSize/15-8                        169µs ± 0%      144µs ± 0%   -14.69%  (p=0.008 n=5+5)
LeafSize/16-8                       72.9µs ± 0%     66.8µs ± 1%    -8.27%  (p=0.008 n=5+5)
LeafSize/32-8                       82.5µs ± 0%     76.7µs ± 0%    -7.04%  (p=0.008 n=5+5)
LeafSize/64-8                        134µs ± 0%      129µs ± 0%    -3.80%  (p=0.008 n=5+5)
ProbablyPrime/n=0-8                 44.2ms ± 0%     43.4ms ± 0%    -1.95%  (p=0.008 n=5+5)
ProbablyPrime/n=1-8                 64.9ms ± 0%     64.0ms ± 0%    -1.27%  (p=0.008 n=5+5)
ProbablyPrime/n=5-8                  147ms ± 0%      146ms ± 0%    -0.58%  (p=0.008 n=5+5)
ProbablyPrime/n=10-8                 250ms ± 0%      249ms ± 0%    -0.35%  (p=0.008 n=5+5)
ProbablyPrime/n=20-8                 456ms ± 0%      455ms ± 0%    -0.18%  (p=0.008 n=5+5)
ProbablyPrime/Lucas-8               23.6ms ± 0%     22.7ms ± 0%    -3.74%  (p=0.008 n=5+5)
ProbablyPrime/MillerRabinBase2-8    20.7ms ± 0%     20.6ms ± 0%      ~     (p=0.421 n=5+5)
FloatSqrt/64-8                      2.25µs ± 1%     2.29µs ± 0%    +1.48%  (p=0.008 n=5+5)
FloatSqrt/128-8                     4.86µs ± 1%     4.92µs ± 1%    +1.21%  (p=0.032 n=5+5)
FloatSqrt/256-8                     13.6µs ± 0%     13.7µs ± 1%    +1.31%  (p=0.032 n=5+5)
FloatSqrt/1000-8                    70.0µs ± 1%     70.1µs ± 0%      ~     (p=0.690 n=5+5)
FloatSqrt/10000-8                   1.92ms ± 0%     1.90ms ± 0%    -0.59%  (p=0.008 n=5+5)
FloatSqrt/100000-8                  55.3ms ± 0%     54.8ms ± 0%    -1.01%  (p=0.008 n=5+5)
FloatSqrt/1000000-8                  4.56s ± 0%      4.50s ± 0%    -1.28%  (p=0.008 n=5+5)

name                              old speed      new speed       delta
AddVV/1-8                         2.97GB/s ± 0%   5.56GB/s ± 0%   +86.85%  (p=0.008 n=5+5)
AddVV/2-8                         9.47GB/s ± 0%  10.66GB/s ± 0%   +12.50%  (p=0.008 n=5+5)
AddVV/3-8                         12.4GB/s ± 0%   14.7GB/s ± 0%   +19.10%  (p=0.008 n=5+5)
AddVV/4-8                         14.6GB/s ± 0%   18.9GB/s ± 0%   +29.63%  (p=0.016 n=4+5)
AddVV/5-8                         16.4GB/s ± 0%   22.0GB/s ± 0%   +34.47%  (p=0.016 n=5+4)
AddVV/10-8                        21.7GB/s ± 0%   35.5GB/s ± 0%   +63.89%  (p=0.008 n=5+5)
AddVV/100-8                       29.4GB/s ± 0%   68.0GB/s ± 0%  +131.38%  (p=0.008 n=5+5)
AddVV/1000-8                      31.7GB/s ± 0%   61.9GB/s ± 0%   +95.43%  (p=0.008 n=5+5)
AddVV/10000-8                     31.2GB/s ± 0%   56.4GB/s ± 0%   +80.83%  (p=0.008 n=5+5)
AddVV/100000-8                    25.9GB/s ± 3%   41.4GB/s ± 0%   +59.98%  (p=0.008 n=5+5)
SubVV/1-8                         2.97GB/s ± 0%   5.56GB/s ± 0%   +86.97%  (p=0.016 n=4+5)
SubVV/2-8                         9.47GB/s ± 0%  10.66GB/s ± 0%   +12.51%  (p=0.008 n=5+5)
SubVV/3-8                         12.4GB/s ± 0%   14.8GB/s ± 0%   +19.23%  (p=0.016 n=4+5)
SubVV/4-8                         14.6GB/s ± 0%   18.9GB/s ± 0%   +29.56%  (p=0.008 n=5+5)
SubVV/5-8                         16.4GB/s ± 0%   22.0GB/s ± 0%   +34.47%  (p=0.016 n=4+5)
SubVV/10-8                        21.7GB/s ± 0%   35.5GB/s ± 0%   +63.89%  (p=0.008 n=5+5)
SubVV/100-8                       29.4GB/s ± 0%   68.0GB/s ± 0%  +131.38%  (p=0.008 n=5+5)
SubVV/1000-8                      31.6GB/s ± 0%   80.1GB/s ± 0%  +153.08%  (p=0.008 n=5+5)
SubVV/10000-8                     31.2GB/s ± 0%   56.7GB/s ± 0%   +81.79%  (p=0.008 n=5+5)
SubVV/100000-8                    29.1GB/s ±10%   29.0GB/s ±18%      ~     (p=0.690 n=5+5)
AddVW/1-8                          859MB/s ± 0%    859MB/s ± 0%    -0.01%  (p=0.008 n=5+5)
AddVW/2-8                          811MB/s ± 1%    814MB/s ± 0%      ~     (p=0.413 n=5+4)
AddVW/3-8                         2.08GB/s ± 0%   2.08GB/s ± 0%      ~     (p=0.206 n=5+5)
AddVW/4-8                         2.46GB/s ± 0%   2.46GB/s ± 0%      ~     (p=0.056 n=5+5)
AddVW/5-8                         2.75GB/s ± 0%   2.75GB/s ± 0%      ~     (p=0.508 n=5+5)
AddVW/10-8                        3.63GB/s ± 0%   3.63GB/s ± 0%      ~     (p=0.214 n=5+5)
AddVW/100-8                       4.79GB/s ± 0%   4.79GB/s ± 0%      ~     (p=0.500 n=5+5)
AddVW/1000-8                      5.27GB/s ± 0%   5.25GB/s ± 0%    -0.43%  (p=0.008 n=5+5)
AddVW/10000-8                     5.30GB/s ± 0%   5.30GB/s ± 0%      ~     (p=0.397 n=5+5)
AddVW/100000-8                    5.27GB/s ± 1%   5.25GB/s ± 1%      ~     (p=0.690 n=5+5)
AddMulVVW/1-8                     1.92GB/s ± 0%   1.96GB/s ± 1%    +1.95%  (p=0.008 n=5+5)
AddMulVVW/2-8                     2.16GB/s ± 1%   2.25GB/s ± 1%    +4.32%  (p=0.008 n=5+5)
AddMulVVW/3-8                     2.39GB/s ± 1%   2.25GB/s ± 3%    -5.79%  (p=0.008 n=5+5)
AddMulVVW/4-8                     2.00GB/s ± 0%   2.31GB/s ± 1%   +15.31%  (p=0.008 n=5+5)
AddMulVVW/5-8                     2.22GB/s ± 0%   2.14GB/s ± 0%    -3.86%  (p=0.008 n=5+5)
AddMulVVW/10-8                    2.15GB/s ± 1%   2.25GB/s ± 0%    +5.03%  (p=0.008 n=5+5)
AddMulVVW/100-8                   2.09GB/s ± 0%   2.14GB/s ± 0%    +2.25%  (p=0.008 n=5+5)
AddMulVVW/1000-8                  2.04GB/s ± 0%   2.38GB/s ± 0%   +16.52%  (p=0.008 n=5+5)
AddMulVVW/10000-8                 2.03GB/s ± 0%   2.10GB/s ± 0%    +3.64%  (p=0.008 n=5+5)
AddMulVVW/100000-8                2.02GB/s ± 0%   2.02GB/s ± 1%      ~     (p=0.690 n=5+5)

Change-Id: Ie482d67a7dbb5af6f5d81af2b3d9d14bd66336db
Reviewed-on: https://go-review.googlesource.com/77831
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

os/exec: document Process.Kill behaviour

It is not clear from documentation what the Process.Kill does. And it
leads to reccuring confusion about Cmd.Start/Wait methods.

Fixes #24220

Change-Id: I66609d21d2954e195d13648014681530eed8ea6c
Reviewed-on: https://go-review.googlesource.com/98715
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

path/filepath: use a temp dir in path_test.go

We should avoid writing temp files to GOROOT, since it might be readonly.

Fixes #23881

Change-Id: Iaa38ec404b303f0cf27fdfb7daf1ddd60fd5d1c9
GitHub-Last-Rev: de0211df8474cc3bbef40f792e2f85b3b6ee259c
GitHub-Pull-Request: golang/go#24238
Reviewed-on: https://go-review.googlesource.com/98517
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

cmd/compile: refactor order.go into methods

No functional changes, just changing all the orderfoo functions
into (*Order).foo methods.

Passes toolstash-check.

Change-Id: Ib9833daa98aff3c645ce56794a414f8472689152
Reviewed-on: https://go-review.googlesource.com/98617
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

os/signal: disable loading of history during test

This change modifies Go to disable loading of users' shell history for
TestTerminalSignal tests. TestTerminalSignal, as part of its workload,
will execute a new interactive bash shell. Bash will attempt to load the
user's history from the file pointed to by the HISTFILE environment
variable. For users with large histories that may take up to several
seconds, pushing the whole test past the 5 second timeout and causing
it to fail.

Change-Id: I11b2f83ee91f51fa1e9774a39181ab365f9a6b3a
GitHub-Last-Rev: 7efdf616a2fcecdf479420fc0004057cee2ea6b2
GitHub-Pull-Request: golang/go#24255
Reviewed-on: https://go-review.googlesource.com/98616
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

internal/trace: remove backlinks from span/task end to start

This is an updated version of golang.org/cl/96395, with the fix to
TestUserSpan.

This reverts commit 7b6f6267e90a8e4eab37a3f2164ba882e6222adb.

Change-Id: I31eec8ba0997f9178dffef8dac608e731ab70872
Reviewed-on: https://go-review.googlesource.com/98236
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>

test/codegen: port math/bits.Leadingzero tests to codegen

Change-Id: Ic21d25db5d56ce77516c53082dfbc010e5875b81
Reviewed-on: https://go-review.googlesource.com/98655
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

runtime: rename vdso symbols to use camel case

This was originally C code using names with underscores, which were
retained when the code was rewritten into Go. Change the code to use
Go-like camel case names.

The names that come from the ELF ABI are left unchanged.

Change-Id: I181bc5dd81284c07bc67b7df4635f4734b41d646
Reviewed-on: https://go-review.googlesource.com/98520
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

runtime: remove unused SYS_* definitions on Linux

Also fix the indentation of the SYS_* definitions in sys_linux_mipsx.s
and order them numerically.

Change-Id: I0c454301c329a163e7db09dcb25d4e825149858c
Reviewed-on: https://go-review.googlesource.com/98448
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

test: port bits.Len intrinsics tests to the new codegen harness

This change move bits.Len* intrinsification tests to the new codegen
test harness, removing them from the old ssa_test file. Five different
test functions (one for each bit.Len function tested) was used, to
avoid possible unwanted interactions between multiple calls inside one
function.

Change-Id: Iffd5be55b58e88597fa30a562a28dacb01236d8b
Reviewed-on: https://go-review.googlesource.com/98156
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>

internal/bytealg: fix arm64 Index function

Missed removing the argument loading from the indexbody function.

Change-Id: Ia1391231fc99771d00410a09fe80a09f08ceed02
Reviewed-on: https://go-review.googlesource.com/98575
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Elias Naur <elias.naur@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

cmd/compile: fold offsets into memory ops

Fold offsets for:

  {ADD,SUB,MUL}[SD]mem
  ADD[LQ]constmem
  {ADD,SUB,AND,OR,XOR}[LQ]mem

Cumulatively, the rules trigger ~900 times in all.bash.

Fixes #23325

Change-Id: If6c701f68fa0b57907a353a07a516b914127d0d8
Reviewed-on: https://go-review.googlesource.com/98035
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

internal/bytealg: move short string Index implementations into bytealg

Also move the arm64 CountByte implementation while we're here.

Fixes #19792

Change-Id: I1e0fdf1e03e3135af84150a2703b58dad1b0d57e
Reviewed-on: https://go-review.googlesource.com/98518
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

internal/bytealg: move compare functions to bytealg

Move bytes.Compare and runtime·cmpstring to bytealg.

Update #19792

Change-Id: I139e6d7c59686bef7a3017e3dec99eba5fd10447
Reviewed-on: https://go-review.googlesource.com/98515
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

internal/bytealg: move Count to bytealg

Move bytes.Count and strings.Count to bytealg.

Update #19792

Change-Id: I3e4e14b504a0b71758885bb131e5656e342cf8cb
Reviewed-on: https://go-review.googlesource.com/98495
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

test: convert all math-related tests from asm_test

Change-Id: If542f0b5c5754e6eb2f9b302fe5a148ba9a57338
Reviewed-on: https://go-review.googlesource.com/98443
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

test: move load/store combines into asmcheck

This CL moves the load/store combining tests into asmcheck.
In addition at being more compact, it's also now easier to
spot what it is missing in each architecture.

While doing so, I think I uncovered a bug in ppc64le and arm64
rules, because they fail to load/store combine in non-trivial
functions. Not sure why, I'll open an issue.

Change-Id: Ia1572d53c0553d9104f3e52b95e4d1768a8440a3
Reviewed-on: https://go-review.googlesource.com/98441
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

test: in asmcheck, dump only the functions which fail

Before this change, in case of any failure, asmcheck was
dumping to stderr the whole output of compile -S, which
can be very long if it contains multiple functions.

Make it so it filters the output to only display the
assembly output of functions for which at least one opcode
check failed. This greatly simplifies debugging.

Change-Id: I1bbf54473b8252a3384e2c1dade82d926afc119d
Reviewed-on: https://go-review.googlesource.com/98444
Run-TryBot: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>

test: port a nil-check interface test from asm_test

Change-Id: I69c1688506d1aeca655047acf35d1bff966fc01e
Reviewed-on: https://go-review.googlesource.com/98442
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

test: use the version of Go used to run run.go

Currently, the top-level testsuite always uses whatever version
of Go is found in the PATH to execute all the tests. This
forces the developers to tweak the PATH to run the testsuite.

Change it to use the same version of Go used to run run.go.
This allows developers to run the testsuite using the tip
compiler by simply saying "../bin/go run run.go".

I think this is a better solution compared to always forcing
"../bin/go", because it allows developers to run the testsuite
using different Go versions, for instance to check if a new
test is fixed in tip compared to the installed compiler.

Fixes #24217

Change-Id: I41b299c753b6e77c41e28be9091b2b630efea9d2
Reviewed-on: https://go-review.googlesource.com/98439
Run-TryBot: Giovanni Bajo <rasky@develer.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

encoding/json: apply conventional error handling in decoder

name                            old time/op    new time/op    delta
CodeEncoder-12                    1.89ms ± 1%    1.91ms ± 0%   +1.16%  (p=0.000 n=20+19)
CodeMarshal-12                    2.09ms ± 1%    2.12ms ± 0%   +1.63%  (p=0.000 n=17+18)
CodeDecoder-12                    8.43ms ± 1%    8.32ms ± 1%   -1.35%  (p=0.000 n=18+20)
UnicodeDecoder-12                  399ns ± 0%     339ns ± 0%  -15.00%  (p=0.000 n=20+19)
DecoderStream-12                   281ns ± 1%     231ns ± 0%  -17.91%  (p=0.000 n=20+16)
CodeUnmarshal-12                  9.35ms ± 2%    9.15ms ± 2%   -2.11%  (p=0.000 n=20+20)
CodeUnmarshalReuse-12             8.41ms ± 2%    8.29ms ± 2%   -1.34%  (p=0.000 n=20+20)
UnmarshalString-12                81.2ns ± 2%    74.0ns ± 4%   -8.89%  (p=0.000 n=20+20)
UnmarshalFloat64-12               71.1ns ± 2%    64.3ns ± 1%   -9.60%  (p=0.000 n=20+19)
UnmarshalInt64-12                 60.6ns ± 2%    53.2ns ± 0%  -12.28%  (p=0.000 n=18+18)
Issue10335-12                     96.9ns ± 0%    87.7ns ± 1%   -9.52%  (p=0.000 n=17+20)
Unmapped-12                        247ns ± 4%     231ns ± 3%   -6.34%  (p=0.000 n=20+20)
TypeFieldsCache/MissTypes1-12     11.1µs ± 0%    11.1µs ± 0%     ~     (p=0.376 n=19+20)
TypeFieldsCache/MissTypes10-12    33.9µs ± 0%    33.8µs ± 0%   -0.32%  (p=0.000 n=18+9)

name                            old speed      new speed      delta
CodeEncoder-12                  1.03GB/s ± 1%  1.01GB/s ± 0%   -1.15%  (p=0.000 n=20+19)
CodeMarshal-12                   930MB/s ± 1%   915MB/s ± 0%   -1.60%  (p=0.000 n=17+18)
CodeDecoder-12                   230MB/s ± 1%   233MB/s ± 1%   +1.37%  (p=0.000 n=18+20)
UnicodeDecoder-12               35.0MB/s ± 0%  41.2MB/s ± 0%  +17.60%  (p=0.000 n=20+19)
CodeUnmarshal-12                 208MB/s ± 2%   212MB/s ± 2%   +2.16%  (p=0.000 n=20+20)

name                            old alloc/op   new alloc/op   delta
Issue10335-12                       184B ± 0%      184B ± 0%     ~     (all equal)
Unmapped-12                         216B ± 0%      216B ± 0%     ~     (all equal)

name                            old allocs/op  new allocs/op  delta
Issue10335-12                       3.00 ± 0%      3.00 ± 0%     ~     (all equal)
Unmapped-12                         4.00 ± 0%      4.00 ± 0%     ~     (all equal)

Change-Id: I4b1a87a205da2ef9a572f86f85bc833653c61570
Reviewed-on: https://go-review.googlesource.com/98440
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

runtime: use vDSO for clock_gettime on linux/arm

Use the __vdso_clock_gettime fast path via the vDSO on linux/arm to
speed up nanotime and walltime. This results in the following
performance improvement for time.Now on a RaspberryPi 3 (running
32bit Raspbian, i.e. GOOS=linux/GOARCH=arm):

name     old time/op  new time/op  delta
TimeNow  0.99µs ± 0%  0.39µs ± 1%  -60.74%  (p=0.000 n=12+20)

Change-Id: I3598278a6c88d7f6a6ce66c56b9d25f9dd2f4c9a
Reviewed-on: https://go-review.googlesource.com/98095
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

runtime: remove unused __vdso_time_sym

It's unused since https://golang.org/cl/99320043

Change-Id: I74d69ff894aa2fb556f1c2083406c118c559d91b
Reviewed-on: https://go-review.googlesource.com/98195
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

internal/bytealg: move equal functions to bytealg

Move bytes.Equal, runtime.memequal, and runtime.memequal_varlen
to the bytealg package.

Update #19792

Change-Id: Ic4175e952936016ea0bda6c7c3dbb33afdc8e4ac
Reviewed-on: https://go-review.googlesource.com/98355
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

encoding/json: use sync.Map for field cache

The previous type cache is quadratic in time in the situation where
new types are continually encountered. Now that it is possible to dynamically
create new types with the reflect package, this can cause json to
perform very poorly.

Switch to sync.Map which does well when the cache has hit steady state,
but also handles occasional updates in better than quadratic time.

benchmark                                     old ns/op      new ns/op     delta
BenchmarkTypeFieldsCache/MissTypes1-8         14817          16202         +9.35%
BenchmarkTypeFieldsCache/MissTypes10-8        70926          69144         -2.51%
BenchmarkTypeFieldsCache/MissTypes100-8       976467         208973        -78.60%
BenchmarkTypeFieldsCache/MissTypes1000-8      79520162       1750371       -97.80%
BenchmarkTypeFieldsCache/MissTypes10000-8     6873625837     16847806      -99.75%
BenchmarkTypeFieldsCache/HitTypes1000-8       7.51           8.80          +17.18%
BenchmarkTypeFieldsCache/HitTypes10000-8      7.58           8.68          +14.51%

The old implementation takes 12 minutes just to build a cache of size 1e5
due to the quadratic behavior. I did not bother benchmark sizes above that.

Change-Id: I5e6facc1eb8e1b80e5ca285e4dd2cc8815618dad
Reviewed-on: https://go-review.googlesource.com/76850
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

internal/syscall/windows/registry: improve ReadSubKeyNames permissions

Make ReadSubKeyNames work even if key is opened with only
ENUMERATE_SUB_KEYs access rights mask.

Fixes #23869

Change-Id: I138bd51715fdbc3bda05607c64bde1150f4fe6b2
Reviewed-on: https://go-review.googlesource.com/97435
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>

internal/bytealg: move IndexByte asssembly to the new bytealg package

Move the IndexByte function from the runtime to a new bytealg package.
The new package will eventually hold all the optimized assembly for
groveling through byte slices and strings. It seems a better home for
this code than randomly keeping it in runtime.

Once this is in, the next step is to move the other functions
(Compare, Equal, ...).

Update #19792

This change seems complicated enough that we might just declare
"not worth it" and abandon.  Opinions welcome.

The core assembly is all unchanged, except minor modifications where
the code reads cpu feature bits.

The wrapper functions have been cleaned up as they are now actually
checked by vet.

Change-Id: I9fa75bee5d85db3a65b3fd3b7997e60367523796
Reviewed-on: https://go-review.googlesource.com/98016
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

net: skip flaky TestLookupLongTXT for now

Flaky tests failing trybots help nobody.

Updates #22857

Change-Id: I87bc018651ab4fe02560a6d24c08a1d7ccd8ba37
Reviewed-on: https://go-review.googlesource.com/97416
Reviewed-by: Ian Lance Taylor <iant@golang.org>

net/http: lock the read-only mutex in shouldRedirect

Since that method uses 'mux.m', we need to lock the mutex to avoid data races.

Change-Id: I998448a6e482b5d6a1b24f3354bb824906e23172
GitHub-Last-Rev: 163a7d4942e793b328e05a7eb91f6d3fdc4ba12b
GitHub-Pull-Request: golang/go#23994
Reviewed-on: https://go-review.googlesource.com/96575
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>

cmd/compile: skip TestEmptyDwarfRanges on Plan 9

TestEmptyDwarfRanges has been added in CL 94816.
This test is failing on Plan 9 because executables
don't have a DWARF symbol table.

Fixes #24226.

Change-Id: Iff7e34b8c2703a2f19ee8087a4d64d0bb98496cd
Reviewed-on: https://go-review.googlesource.com/98275
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

internal/trace: Revert "remove backlinks from span/task end to start"

This reverts commit 16398894dccf06e34af8fb1c7cff6eed9b163057.
This broke TestUserTaskSpan test.

Change-Id: If5ff8bdfe84e8cb30787b03ead87205ece3d5601
Reviewed-on: https://go-review.googlesource.com/98235
Reviewed-by: Heschi Kreinick <heschi@google.com>

internal/trace: remove backlinks from span/task end to start

Even though undocumented, the assumption is the Event's link field
points to the following event in the future. The new span/task event
processing breaks the assumption.

Change-Id: I4ce2f30c67c4f525ec0a121a7e43d8bdd2ec3f77
Reviewed-on: https://go-review.googlesource.com/96395
Reviewed-by: Heschi Kreinick <heschi@google.com>

test/codegen: add copyright headers to new codegen files

Change-Id: I9fe6572d1043ef9ee09c0925059ded554ad24c6b
Reviewed-on: https://go-review.googlesource.com/98215
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

cmd/compile: convert type during finishcompare

When recursively calling walkexpr, r.Type is still the untyped value.
It then sometimes recursively calls finishcompare, which complains that
you can't compare the resulting expression to that untyped value.

Updates #23834.

Change-Id: I6b7acd3970ceaff8da9216bfa0ae24aca5dee828
Reviewed-on: https://go-review.googlesource.com/97856
Reviewed-by: Matthew Dempsky <mdempsky@google.com>

cmd/compile: add DWARF register mappings for ARM64.

Add DWARF register mappings for ARM64, so that that arch will become
usable with "-dwarflocationlists". [NB: I've plugged in a set of
numbers from the doc, but this will require additional manual testing.]

Change-Id: Id9aa63857bc8b4f5c825f49274101cf372e9e856
Reviewed-on: https://go-review.googlesource.com/82515
Reviewed-by: Heschi Kreinick <heschi@google.com>

cmd/link: fix up debug_range for dsymutil (revert CL 72371)

Dsymutil, an utility used on macOS when externally linking executables,
does not support base address selector entries in debug_ranges.

CL 73271 worked around this problem by removing base address selectors
and emitting CU-relative relocations for each list entry.

This commit, as an optimization, reintroduces the base address
selectors and changes the linker to remove them again, but only when it
knows that it will have to invoke the external linker on macOS.

Compilecmp comparing master with a branch that has scope tracking
always enabled:

completed   15 of   15, estimated time remaining 0s (eta 2:43PM)
name        old time/op       new time/op       delta
Template          272ms ± 8%        257ms ± 5%  -5.33%  (p=0.000 n=15+14)
Unicode           124ms ± 7%        122ms ± 5%    ~     (p=0.210 n=14+14)
GoTypes           873ms ± 3%        870ms ± 5%    ~     (p=0.856 n=15+13)
Compiler          4.49s ± 2%        4.49s ± 5%    ~     (p=0.982 n=14+14)
SSA               11.8s ± 4%        11.8s ± 3%    ~     (p=0.653 n=15+15)
Flate             163ms ± 6%        164ms ± 9%    ~     (p=0.914 n=14+15)
GoParser          203ms ± 6%        202ms ±10%    ~     (p=0.571 n=14+14)
Reflect           547ms ± 7%        542ms ± 4%    ~     (p=0.914 n=15+14)
Tar               244ms ± 7%        237ms ± 3%  -2.80%  (p=0.002 n=14+13)
XML               289ms ± 6%        289ms ± 5%    ~     (p=0.839 n=14+14)
[Geo mean]        537ms             531ms       -1.10%

name        old user-time/op  new user-time/op  delta
Template          360ms ± 4%        341ms ± 7%  -5.16%  (p=0.000 n=14+14)
Unicode           189ms ±11%        190ms ± 8%    ~     (p=0.844 n=15+15)
GoTypes           1.13s ± 4%        1.14s ± 7%    ~     (p=0.582 n=15+14)
Compiler          5.34s ± 2%        5.40s ± 4%  +1.19%  (p=0.036 n=11+13)
SSA               14.7s ± 2%        14.7s ± 3%    ~     (p=0.602 n=15+15)
Flate             211ms ± 7%        214ms ± 8%    ~     (p=0.252 n=14+14)
GoParser          267ms ±12%        266ms ± 2%    ~     (p=0.837 n=15+11)
Reflect           706ms ± 4%        701ms ± 3%    ~     (p=0.213 n=14+12)
Tar               331ms ± 9%        320ms ± 5%  -3.30%  (p=0.025 n=15+14)
XML               378ms ± 4%        373ms ± 6%    ~     (p=0.253 n=14+15)
[Geo mean]        704ms             700ms       -0.58%

name        old alloc/op      new alloc/op      delta
Template         38.0MB ± 0%       38.4MB ± 0%  +1.12%  (p=0.000 n=15+15)
Unicode          28.8MB ± 0%       28.8MB ± 0%  +0.17%  (p=0.000 n=15+15)
GoTypes           112MB ± 0%        114MB ± 0%  +1.47%  (p=0.000 n=15+15)
Compiler          465MB ± 0%        473MB ± 0%  +1.71%  (p=0.000 n=15+15)
SSA              1.48GB ± 0%       1.53GB ± 0%  +3.07%  (p=0.000 n=15+15)
Flate            24.3MB ± 0%       24.7MB ± 0%  +1.67%  (p=0.000 n=15+15)
GoParser         30.7MB ± 0%       31.0MB ± 0%  +1.15%  (p=0.000 n=12+15)
Reflect          76.3MB ± 0%       77.1MB ± 0%  +0.97%  (p=0.000 n=15+15)
Tar              39.2MB ± 0%       39.6MB ± 0%  +0.91%  (p=0.000 n=15+15)
XML              41.5MB ± 0%       42.0MB ± 0%  +1.29%  (p=0.000 n=15+15)
[Geo mean]       77.5MB            78.6MB       +1.35%

name        old allocs/op     new allocs/op     delta
Template           385k ± 0%         387k ± 0%  +0.51%  (p=0.000 n=15+15)
Unicode            342k ± 0%         343k ± 0%  +0.10%  (p=0.000 n=14+15)
GoTypes           1.19M ± 0%        1.19M ± 0%  +0.62%  (p=0.000 n=15+15)
Compiler          4.51M ± 0%        4.54M ± 0%  +0.50%  (p=0.000 n=14+15)
SSA               12.2M ± 0%        12.4M ± 0%  +1.12%  (p=0.000 n=14+15)
Flate              234k ± 0%         236k ± 0%  +0.60%  (p=0.000 n=15+15)
GoParser           318k ± 0%         320k ± 0%  +0.60%  (p=0.000 n=15+15)
Reflect            974k ± 0%         977k ± 0%  +0.27%  (p=0.000 n=15+15)
Tar                395k ± 0%         397k ± 0%  +0.37%  (p=0.000 n=14+15)
XML                404k ± 0%         407k ± 0%  +0.53%  (p=0.000 n=15+15)
[Geo mean]         794k              798k       +0.52%

name        old text-bytes    new text-bytes    delta
HelloSize         680kB ± 0%        680kB ± 0%    ~     (all equal)

name        old data-bytes    new data-bytes    delta
HelloSize        9.62kB ± 0%       9.62kB ± 0%    ~     (all equal)

name        old bss-bytes     new bss-bytes     delta
HelloSize         125kB ± 0%        125kB ± 0%    ~     (all equal)

name        old exe-bytes     new exe-bytes     delta
HelloSize        1.11MB ± 0%       1.13MB ± 0%  +1.85%  (p=0.000 n=15+15)

Change-Id: I61c98ba0340cb798034b2bb55e3ab3a58ac1cf23
Reviewed-on: https://go-review.googlesource.com/98075
Reviewed-by: Heschi Kreinick <heschi@google.com>

cmd/compile/internal/ssa: batch up all zero-width instructions

When generating location lists, batch up changes for all zero-width
instructions, not just phis. This prevents the creation of location list
entries that don't actually cover any instructions.

This isn't perfect because of the caveats in the prior CL (Copy is
zero-width sometimes) but in practice this seems to fix all of the empty
lists in std.

Change-Id: Ice4a9ade36b6b24ca111d1494c414eec96e5af25
Reviewed-on: https://go-review.googlesource.com/97958
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>

cmd/compile/internal/ssa: note zero-width Ops

Add a bool to opInfo to indicate if an Op never results in any
instructions. This is a conservative approximation: some operations,
like Copy, may or may not generate code depending on their arguments.

I built the list by reading each arch's ssaGenValue function. Hopefully
I got them all.

Change-Id: I130b251b65f18208294e129bb7ddc3f91d57d31d
Reviewed-on: https://go-review.googlesource.com/97957
Reviewed-by: Keith Randall <khr@golang.org>

runtime: fix typo, func comments should start with function name

Change-Id: I289af4884583537639800e37928c22814d38cba9
Reviewed-on: https://go-review.googlesource.com/98115
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>

cmd/compile: optimize scope tracking

1. Detect and remove the markers of lexical scopes that don't contain
any variables early in noder, instead of waiting until the end of DWARF
generation.
This saves memory by never allocating some of the markers and optimizes
some of the algorithms that depend on the number of scopes.

2. Assign scopes to Progs by doing, for each Prog, a binary search over
the markers array. This is faster, compared to sorting the Prog list
because there are fewer markers than there are Progs.

completed   15 of   15, estimated time remaining 0s (eta 2:30PM)
name        old time/op       new time/op       delta
Template          274ms ± 5%        260ms ± 6%  -4.91%  (p=0.000 n=15+15)
Unicode           126ms ± 5%        127ms ± 9%    ~     (p=0.856 n=13+15)
GoTypes           861ms ± 5%        857ms ± 4%    ~     (p=0.595 n=15+15)
Compiler          4.11s ± 4%        4.12s ± 5%    ~     (p=1.000 n=15+15)
SSA               10.7s ± 2%        10.9s ± 4%  +2.01%  (p=0.002 n=14+14)
Flate             163ms ± 4%        166ms ± 9%    ~     (p=0.134 n=14+15)
GoParser          203ms ± 4%        205ms ± 6%    ~     (p=0.461 n=15+15)
Reflect           544ms ± 5%        549ms ± 4%    ~     (p=0.174 n=15+15)
Tar               249ms ± 9%        245ms ± 6%    ~     (p=0.285 n=15+15)
XML               286ms ± 4%        291ms ± 5%    ~     (p=0.081 n=15+15)
[Geo mean]        528ms             529ms       +0.14%

name        old user-time/op  new user-time/op  delta
Template          358ms ± 7%        354ms ± 5%    ~     (p=0.242 n=14+15)
Unicode           189ms ±11%        191ms ±10%    ~     (p=0.438 n=15+15)
GoTypes           1.15s ± 4%        1.14s ± 3%    ~     (p=0.405 n=15+15)
Compiler          5.36s ± 6%        5.35s ± 5%    ~     (p=0.588 n=15+15)
SSA               14.6s ± 3%        15.0s ± 4%  +2.58%  (p=0.000 n=15+15)
Flate             214ms ±12%        216ms ± 8%    ~     (p=0.539 n=15+15)
GoParser          267ms ± 6%        270ms ± 5%    ~     (p=0.569 n=15+15)
Reflect           712ms ± 5%        709ms ± 4%    ~     (p=0.894 n=15+15)
Tar               329ms ± 8%        330ms ± 5%    ~     (p=0.974 n=14+15)
XML               371ms ± 3%        381ms ± 5%  +2.85%  (p=0.002 n=13+15)
[Geo mean]        705ms             709ms       +0.62%

name        old alloc/op      new alloc/op      delta
Template         38.0MB ± 0%       38.4MB ± 0%  +1.27%  (p=0.000 n=15+14)
Unicode          28.8MB ± 0%       28.8MB ± 0%  +0.16%  (p=0.000 n=15+14)
GoTypes           112MB ± 0%        114MB ± 0%  +1.64%  (p=0.000 n=15+15)
Compiler          465MB ± 0%        474MB ± 0%  +1.91%  (p=0.000 n=15+15)
SSA              1.48GB ± 0%       1.53GB ± 0%  +3.32%  (p=0.000 n=15+15)
Flate            24.3MB ± 0%       24.8MB ± 0%  +1.77%  (p=0.000 n=14+15)
GoParser         30.7MB ± 0%       31.1MB ± 0%  +1.27%  (p=0.000 n=15+15)
Reflect          76.3MB ± 0%       77.1MB ± 0%  +1.03%  (p=0.000 n=15+15)
Tar              39.2MB ± 0%       39.6MB ± 0%  +1.02%  (p=0.000 n=13+15)
XML              41.5MB ± 0%       42.1MB ± 0%  +1.45%  (p=0.000 n=15+15)
[Geo mean]       77.5MB            78.7MB       +1.48%

name        old allocs/op     new allocs/op     delta
Template           385k ± 0%         387k ± 0%  +0.54%  (p=0.000 n=15+15)
Unicode            342k ± 0%         343k ± 0%  +0.10%  (p=0.000 n=15+15)
GoTypes           1.19M ± 0%        1.19M ± 0%  +0.64%  (p=0.000 n=14+15)
Compiler          4.51M ± 0%        4.54M ± 0%  +0.53%  (p=0.000 n=15+15)
SSA               12.2M ± 0%        12.4M ± 0%  +1.16%  (p=0.000 n=15+15)
Flate              234k ± 0%         236k ± 0%  +0.63%  (p=0.000 n=14+15)
GoParser           318k ± 0%         320k ± 0%  +0.63%  (p=0.000 n=15+15)
Reflect            974k ± 0%         977k ± 0%  +0.28%  (p=0.000 n=15+15)
Tar                395k ± 0%         397k ± 0%  +0.38%  (p=0.000 n=15+13)
XML                404k ± 0%         407k ± 0%  +0.55%  (p=0.000 n=15+15)
[Geo mean]         794k              799k       +0.55%

name        old text-bytes    new text-bytes    delta
HelloSize         680kB ± 0%        680kB ± 0%    ~     (all equal)

name        old data-bytes    new data-bytes    delta
HelloSize        9.62kB ± 0%       9.62kB ± 0%    ~     (all equal)

name        old bss-bytes     new bss-bytes     delta
HelloSize         125kB ± 0%        125kB ± 0%    ~     (all equal)

name        old exe-bytes     new exe-bytes     delta
HelloSize        1.11MB ± 0%       1.12MB ± 0%  +1.11%  (p=0.000 n=15+15)

Change-Id: I95a0173ee28c52be1a4851d2a6e389529e74bf28
Reviewed-on: https://go-review.googlesource.com/95396
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>

syscall: fix nil pointer dereference in Select on linux/{arm64,mips64x}

The timeout parameter might be nil, don't dereference it
unconditionally.

Fixes #24189

Change-Id: I03e6a1ab74fe30322ce6bcfd3d6c42130b6d61be
Reviewed-on: https://go-review.googlesource.com/97819
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Revert "runtime: use bytes.IndexByte in findnull"

This reverts commit 7365fac2dbd01960268ee051ed03d961258d4ef4.

Reason for revert: breaks the build on some architectures, reading unmapped pages?

Change-Id: I3a8c02dc0b649269faacea79ecd8213defa97c54
Reviewed-on: https://go-review.googlesource.com/97995
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

cmd/link: fix up location lists for dsymutil

LLVM tools, particularly lldb and dsymutil, don't support base address
selection entries in location lists. When targeting GOOS=darwin,
mode, have the linker translate location lists to CU-relative form
instead.

Technically, this isn't necessary when linking internally, as long as
nobody plans to use anything other than Delve to look at the DWARF. But
someone might want to use lldb, and it's really confusing when dwarfdump
shows gibberish for the location entries. The performance cost isn't
noticeable, so enable it even for internal linking.

Doing this in the linker is a little weird, but it was more expensive in
the compiler, probably because the compiler is much more stressful to
the GC. Also, if we decide to only do it for external linking, the
compiler can't see the link mode.

Benchmark before and after this commit on Mac with -dwarflocationlists=1:

name        old time/op       new time/op       delta
StdCmd            21.3s ± 1%        21.3s ± 1%    ~     (p=0.310 n=27+27)

Only StdCmd is relevant, because only StdCmd runs the linker. Whatever
the cost is here, it's not very large.

Change-Id: Ic8ef780d0e263230ce6aa3ca3a32fc9abd750b1e
Reviewed-on: https://go-review.googlesource.com/97956
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>

cmd/compile/internal/ssa: avoid accidental list ends

Some SSA values don't translate into any instructions. If a function
began with two of them, and both modified the storage of the same
variable, we'd end up with a location list entry that started and ended
at 0. That looks like an end-of-list entry, which would then confuse
downstream tools, particularly the fixup in the linker.

"Fix" this by changing the end of such entries to 1. Should be harmless,
since AFAIK we don't generate any 1-byte instructions. Later CLs will
reduce the frequency of these entries anyway.

Change-Id: I9b7e5e69f914244cc826fb9f4a6acfe2dc695f81
Reviewed-on: https://go-review.googlesource.com/97955
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>

cmd/compile: fix dwarf ranges of inlined subroutine entries

DWARF ranges are half-open.

Fixes #23928

Change-Id: I71b3384d1bc2c65bd37ca8a02a0b7ff48fec3688
Reviewed-on: https://go-review.googlesource.com/94816
Reviewed-by: Than McIntosh <thanm@google.com>
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

cmd/asm: fix assembling return jump

In RET instruction, the operand is the return jump's target,
which should be put in Prog.To.

Add an action "buildrundir" to the test driver, which builds
(compile+assemble+link) the code in a directory and runs the
resulting binary.

Fixes #23838.

Change-Id: I7ebe7eda49024b40a69a24857322c5ca9c67babb
Reviewed-on: https://go-review.googlesource.com/94175
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>

runtime: improve arm64 memmove implementation

Improve runtime memmove_arm64.s specializing for small copies and
processing 32 bytes per iteration for 32 bytes or more.

Benchmark results of runtime/Memmove on Amberwing:
name                      old time/op    new time/op     delta
Memmove/0                   7.61ns ± 0%     7.20ns ± 0%     ~     (p=0.053 n=5+7)
Memmove/1                   9.28ns ± 0%     8.80ns ± 0%   -5.17%  (p=0.000 n=4+8)
Memmove/2                   9.65ns ± 0%     9.20ns ± 0%   -4.68%  (p=0.000 n=5+8)
Memmove/3                   10.0ns ± 0%      9.2ns ± 0%   -7.83%  (p=0.000 n=5+8)
Memmove/4                   10.6ns ± 0%      9.2ns ± 0%  -13.21%  (p=0.000 n=5+8)
Memmove/5                   11.0ns ± 0%      9.2ns ± 0%  -16.36%  (p=0.000 n=5+8)
Memmove/6                   12.4ns ± 0%      9.2ns ± 0%  -25.81%  (p=0.000 n=5+8)
Memmove/7                   13.1ns ± 0%      9.2ns ± 0%  -29.56%  (p=0.000 n=5+8)
Memmove/8                   9.10ns ± 1%     9.20ns ± 0%   +1.08%  (p=0.002 n=5+8)
Memmove/9                   9.67ns ± 0%     9.20ns ± 0%   -4.88%  (p=0.000 n=5+8)
Memmove/10                  10.4ns ± 0%      9.2ns ± 0%  -11.54%  (p=0.000 n=5+8)
Memmove/11                  10.9ns ± 0%      9.2ns ± 0%  -15.60%  (p=0.000 n=5+8)
Memmove/12                  11.5ns ± 0%      9.2ns ± 0%  -20.00%  (p=0.000 n=5+8)
Memmove/13                  12.4ns ± 0%      9.2ns ± 0%  -25.81%  (p=0.000 n=5+8)
Memmove/14                  13.1ns ± 0%      9.2ns ± 0%  -29.77%  (p=0.000 n=5+8)
Memmove/15                  13.8ns ± 0%      9.2ns ± 0%  -33.33%  (p=0.000 n=5+8)
Memmove/16                  9.70ns ± 0%     9.20ns ± 0%   -5.19%  (p=0.000 n=5+8)
Memmove/32                  10.6ns ± 0%      9.2ns ± 0%  -13.21%  (p=0.000 n=4+8)
Memmove/64                  13.4ns ± 0%     10.2ns ± 0%  -23.88%  (p=0.000 n=4+8)
Memmove/128                 18.1ns ± 1%     13.2ns ± 0%  -26.99%  (p=0.000 n=5+8)
Memmove/256                 25.2ns ± 0%     16.4ns ± 0%  -34.92%  (p=0.000 n=5+8)
Memmove/512                 36.4ns ± 0%     22.8ns ± 0%  -37.36%  (p=0.000 n=5+8)
Memmove/1024                70.1ns ± 0%     36.8ns ±11%  -47.49%  (p=0.002 n=5+8)
Memmove/2048                 121ns ± 0%       61ns ± 0%     ~     (p=0.053 n=5+7)
Memmove/4096                 224ns ± 0%      120ns ± 0%  -46.43%  (p=0.000 n=5+8)
MemmoveUnalignedDst/0       8.40ns ± 0%     8.00ns ± 0%   -4.76%  (p=0.000 n=5+8)
MemmoveUnalignedDst/1       9.87ns ± 1%    10.00ns ± 0%     ~     (p=0.070 n=5+8)
MemmoveUnalignedDst/2       10.6ns ± 0%     10.4ns ± 0%   -1.89%  (p=0.000 n=5+8)
MemmoveUnalignedDst/3       10.8ns ± 0%     10.4ns ± 0%   -3.70%  (p=0.000 n=5+8)
MemmoveUnalignedDst/4       10.9ns ± 0%     10.3ns ± 0%     ~     (p=0.053 n=5+7)
MemmoveUnalignedDst/5       11.5ns ± 0%     10.3ns ± 1%  -10.22%  (p=0.000 n=4+8)
MemmoveUnalignedDst/6       13.2ns ± 0%     10.4ns ± 1%  -21.50%  (p=0.000 n=5+8)
MemmoveUnalignedDst/7       13.7ns ± 0%     10.3ns ± 1%  -24.64%  (p=0.000 n=4+8)
MemmoveUnalignedDst/8       10.1ns ± 0%     10.4ns ± 0%   +2.97%  (p=0.002 n=5+8)
MemmoveUnalignedDst/9       10.7ns ± 0%     10.4ns ± 0%   -2.80%  (p=0.000 n=5+8)
MemmoveUnalignedDst/10      11.2ns ± 1%     10.4ns ± 0%   -6.81%  (p=0.000 n=5+8)
MemmoveUnalignedDst/11      11.6ns ± 0%     10.4ns ± 0%  -10.34%  (p=0.000 n=5+8)
MemmoveUnalignedDst/12      12.5ns ± 2%     10.4ns ± 0%  -16.53%  (p=0.000 n=5+8)
MemmoveUnalignedDst/13      13.7ns ± 0%     10.4ns ± 0%  -24.09%  (p=0.000 n=5+8)
MemmoveUnalignedDst/14      14.0ns ± 0%     10.4ns ± 0%  -25.71%  (p=0.000 n=5+8)
MemmoveUnalignedDst/15      14.6ns ± 0%     10.4ns ± 0%  -28.77%  (p=0.000 n=5+8)
MemmoveUnalignedDst/16      10.5ns ± 0%     10.4ns ± 0%   -0.95%  (p=0.000 n=5+8)
MemmoveUnalignedDst/32      12.4ns ± 0%     11.6ns ± 0%   -6.05%  (p=0.000 n=5+8)
MemmoveUnalignedDst/64      15.2ns ± 0%     12.3ns ± 0%  -19.08%  (p=0.000 n=5+8)
MemmoveUnalignedDst/128     18.7ns ± 0%     15.2ns ± 0%  -18.72%  (p=0.000 n=5+8)
MemmoveUnalignedDst/256     25.1ns ± 0%     18.6ns ± 0%  -25.90%  (p=0.000 n=5+8)
MemmoveUnalignedDst/512     37.8ns ± 0%     24.4ns ± 0%  -35.45%  (p=0.000 n=5+8)
MemmoveUnalignedDst/1024    74.6ns ± 0%     40.4ns ± 0%     ~     (p=0.053 n=5+7)
MemmoveUnalignedDst/2048     133ns ± 0%       75ns ± 0%  -43.91%  (p=0.000 n=5+8)
MemmoveUnalignedDst/4096     247ns ± 0%      141ns ± 0%  -42.91%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/0       8.40ns ± 0%     8.00ns ± 0%   -4.76%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/1       9.81ns ± 0%    10.00ns ± 0%   +1.98%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/2       10.5ns ± 0%     10.0ns ± 0%   -4.76%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/3       10.7ns ± 1%     10.0ns ± 0%   -6.89%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/4       11.3ns ± 0%     10.0ns ± 0%  -11.50%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/5       11.6ns ± 0%     10.0ns ± 0%  -13.79%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/6       13.6ns ± 0%     10.0ns ± 0%  -26.47%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/7       14.4ns ± 0%     10.0ns ± 0%  -30.75%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/8       9.87ns ± 1%    10.00ns ± 0%     ~     (p=0.070 n=5+8)
MemmoveUnalignedSrc/9       10.4ns ± 0%     10.0ns ± 0%   -3.85%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/10      11.2ns ± 0%     10.0ns ± 0%  -10.71%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/11      11.8ns ± 0%     10.0ns ± 0%  -15.25%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/12      12.1ns ± 0%     10.0ns ± 0%  -17.36%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/13      13.6ns ± 0%     10.0ns ± 0%  -26.47%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/14      14.7ns ± 0%     10.0ns ± 0%  -31.79%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/15      14.4ns ± 0%     10.0ns ± 0%  -30.56%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/16      11.0ns ± 0%     10.0ns ± 0%   -9.09%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/32      11.5ns ± 0%     10.0ns ± 0%  -13.04%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/64      14.9ns ± 0%     11.2ns ± 0%  -24.83%  (p=0.000 n=4+8)
MemmoveUnalignedSrc/128     19.5ns ± 0%     15.2ns ± 0%  -22.05%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/256     27.3ns ± 2%     19.2ns ± 0%  -29.62%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/512     40.4ns ± 0%     27.2ns ± 0%  -32.67%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/1024    75.4ns ± 0%     44.4ns ± 0%  -41.15%  (p=0.000 n=5+8)
MemmoveUnalignedSrc/2048     131ns ± 0%       77ns ± 3%  -41.56%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/4096     248ns ± 0%      145ns ± 0%  -41.53%  (p=0.000 n=5+8)

name                      old speed      new speed       delta
Memmove/1                  108MB/s ± 0%    114MB/s ± 0%   +5.37%  (p=0.004 n=4+8)
Memmove/2                  207MB/s ± 0%    217MB/s ± 0%   +4.85%  (p=0.002 n=5+8)
Memmove/3                  301MB/s ± 0%    326MB/s ± 0%   +8.45%  (p=0.002 n=5+8)
Memmove/4                  377MB/s ± 0%    435MB/s ± 0%  +15.31%  (p=0.004 n=4+8)
Memmove/5                  455MB/s ± 0%    543MB/s ± 0%  +19.46%  (p=0.002 n=5+8)
Memmove/6                  483MB/s ± 0%    652MB/s ± 0%  +34.88%  (p=0.003 n=5+7)
Memmove/7                  537MB/s ± 0%    761MB/s ± 0%  +41.71%  (p=0.002 n=5+8)
Memmove/8                  879MB/s ± 1%    869MB/s ± 0%   -1.15%  (p=0.000 n=5+7)
Memmove/9                  931MB/s ± 0%    978MB/s ± 0%   +5.05%  (p=0.002 n=5+8)
Memmove/10                 960MB/s ± 0%   1086MB/s ± 0%  +13.13%  (p=0.002 n=5+8)
Memmove/11                1.00GB/s ± 0%   1.20GB/s ± 0%  +18.92%  (p=0.003 n=5+7)
Memmove/12                1.04GB/s ± 0%   1.30GB/s ± 0%  +25.40%  (p=0.002 n=5+8)
Memmove/13                1.05GB/s ± 0%   1.41GB/s ± 0%  +34.87%  (p=0.002 n=5+8)
Memmove/14                1.07GB/s ± 0%   1.52GB/s ± 0%  +42.14%  (p=0.002 n=5+8)
Memmove/15                1.09GB/s ± 0%   1.63GB/s ± 0%  +49.91%  (p=0.002 n=5+8)
Memmove/16                1.65GB/s ± 0%   1.74GB/s ± 0%   +5.40%  (p=0.003 n=5+7)
Memmove/32                3.01GB/s ± 0%   3.48GB/s ± 0%  +15.58%  (p=0.003 n=5+7)
Memmove/64                4.76GB/s ± 0%   6.27GB/s ± 0%  +31.75%  (p=0.003 n=5+7)
Memmove/128               7.08GB/s ± 1%   9.69GB/s ± 0%  +36.96%  (p=0.002 n=5+8)
Memmove/256               10.2GB/s ± 0%   15.6GB/s ± 0%  +53.58%  (p=0.002 n=5+8)
Memmove/512               14.1GB/s ± 0%   22.4GB/s ± 0%  +59.57%  (p=0.003 n=5+7)
Memmove/1024              14.6GB/s ± 0%   27.9GB/s ±10%  +91.00%  (p=0.002 n=5+8)
Memmove/2048              16.9GB/s ± 0%   33.4GB/s ± 0%  +98.32%  (p=0.003 n=5+7)
Memmove/4096              18.3GB/s ± 0%   33.9GB/s ± 0%  +85.80%  (p=0.002 n=5+8)
MemmoveUnalignedDst/1      101MB/s ± 1%    100MB/s ± 0%     ~     (p=0.586 n=5+8)
MemmoveUnalignedDst/2      189MB/s ± 0%    192MB/s ± 0%   +1.82%  (p=0.002 n=5+8)
MemmoveUnalignedDst/3      278MB/s ± 0%    288MB/s ± 0%   +3.88%  (p=0.003 n=5+7)
MemmoveUnalignedDst/4      368MB/s ± 0%    387MB/s ± 0%   +5.41%  (p=0.003 n=5+7)
MemmoveUnalignedDst/5      434MB/s ± 0%    484MB/s ± 0%  +11.52%  (p=0.002 n=5+8)
MemmoveUnalignedDst/6      454MB/s ± 0%    580MB/s ± 0%  +27.62%  (p=0.002 n=5+8)
MemmoveUnalignedDst/7      509MB/s ± 0%    677MB/s ± 0%  +33.01%  (p=0.002 n=5+8)
MemmoveUnalignedDst/8      792MB/s ± 0%    770MB/s ± 0%   -2.77%  (p=0.002 n=5+8)
MemmoveUnalignedDst/9      841MB/s ± 0%    866MB/s ± 0%   +2.92%  (p=0.002 n=5+8)
MemmoveUnalignedDst/10     896MB/s ± 0%    962MB/s ± 0%   +7.35%  (p=0.003 n=5+7)
MemmoveUnalignedDst/11     947MB/s ± 0%   1058MB/s ± 0%  +11.80%  (p=0.002 n=5+8)
MemmoveUnalignedDst/12     962MB/s ± 2%   1154MB/s ± 0%  +19.97%  (p=0.002 n=5+8)
MemmoveUnalignedDst/13     947MB/s ± 0%   1251MB/s ± 0%  +32.08%  (p=0.002 n=5+8)
MemmoveUnalignedDst/14    1.00GB/s ± 0%   1.35GB/s ± 0%  +34.55%  (p=0.002 n=5+8)
MemmoveUnalignedDst/15    1.03GB/s ± 0%   1.44GB/s ± 0%  +40.50%  (p=0.002 n=5+8)
MemmoveUnalignedDst/16    1.53GB/s ± 0%   1.54GB/s ± 0%   +0.77%  (p=0.002 n=5+8)
MemmoveUnalignedDst/32    2.58GB/s ± 0%   2.75GB/s ± 0%   +6.52%  (p=0.003 n=5+7)
MemmoveUnalignedDst/64    4.21GB/s ± 0%   5.19GB/s ± 0%  +23.40%  (p=0.004 n=5+6)
MemmoveUnalignedDst/128   6.86GB/s ± 0%   8.42GB/s ± 0%  +22.78%  (p=0.003 n=5+7)
MemmoveUnalignedDst/256   10.2GB/s ± 0%   13.8GB/s ± 0%  +35.15%  (p=0.002 n=5+8)
MemmoveUnalignedDst/512   13.5GB/s ± 0%   21.0GB/s ± 0%  +54.90%  (p=0.002 n=5+8)
MemmoveUnalignedDst/1024  13.7GB/s ± 0%   25.3GB/s ± 0%  +84.61%  (p=0.003 n=5+7)
MemmoveUnalignedDst/2048  15.3GB/s ± 0%   27.5GB/s ± 0%  +79.52%  (p=0.002 n=5+8)
MemmoveUnalignedDst/4096  16.5GB/s ± 0%   28.9GB/s ± 0%  +74.74%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/1      102MB/s ± 0%    100MB/s ± 0%   -2.02%  (p=0.000 n=5+7)
MemmoveUnalignedSrc/2      191MB/s ± 0%    200MB/s ± 0%   +4.78%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/3      279MB/s ± 0%    300MB/s ± 0%   +7.45%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/4      354MB/s ± 0%    400MB/s ± 0%  +13.10%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/5      431MB/s ± 0%    500MB/s ± 0%  +16.02%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/6      441MB/s ± 0%    600MB/s ± 0%  +36.03%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/7      485MB/s ± 0%    700MB/s ± 0%  +44.29%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/8      811MB/s ± 1%    800MB/s ± 0%   -1.36%  (p=0.016 n=5+8)
MemmoveUnalignedSrc/9      864MB/s ± 0%    900MB/s ± 0%   +4.07%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/10     893MB/s ± 0%    999MB/s ± 0%  +11.97%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/11     932MB/s ± 0%   1099MB/s ± 0%  +18.01%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/12     988MB/s ± 0%   1199MB/s ± 0%  +21.35%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/13     955MB/s ± 0%   1299MB/s ± 0%  +36.02%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/14     955MB/s ± 0%   1399MB/s ± 0%  +46.52%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/15    1.04GB/s ± 0%   1.50GB/s ± 0%  +44.18%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/16    1.45GB/s ± 0%   1.60GB/s ± 0%  +10.14%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/32    2.78GB/s ± 0%   3.20GB/s ± 0%  +15.16%  (p=0.003 n=5+7)
MemmoveUnalignedSrc/64    4.30GB/s ± 0%   5.72GB/s ± 0%  +32.90%  (p=0.003 n=5+7)
MemmoveUnalignedSrc/128   6.57GB/s ± 0%   8.42GB/s ± 0%  +28.06%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/256   9.39GB/s ± 1%  13.33GB/s ± 0%  +41.96%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/512   12.7GB/s ± 0%   18.8GB/s ± 0%  +48.53%  (p=0.003 n=5+7)
MemmoveUnalignedSrc/1024  13.6GB/s ± 0%   23.0GB/s ± 0%  +69.82%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/2048  15.6GB/s ± 0%   26.8GB/s ± 3%  +71.37%  (p=0.002 n=5+8)
MemmoveUnalignedSrc/4096  16.5GB/s ± 0%   28.2GB/s ± 0%  +71.40%  (p=0.002 n=5+8)

Fixes #22925

Change-Id: I38c1a9ad5c6e3f4f95fc521c4b7e3140b58b4737
Reviewed-on: https://go-review.googlesource.com/83799
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

runtime: use bytes.IndexByte in findnull

bytes.IndexByte is heavily optimized.
Use it in findnull.

name        old time/op  new time/op  delta
GoString-8  65.5ns ± 1%  40.2ns ± 1%  -38.62%  (p=0.000 n=19+19)

findnull is also used in gostringnocopy,
which is used in many hot spots in the runtime.

Fixes #23830

Change-Id: I2e6cb279c7d8078f8844065de684cc3567fe89d7
Reviewed-on: https://go-review.googlesource.com/97523
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

cmd/compile/internal/ssa: combine consecutive BigEndian stores on arm64

This optimization mirrors that which is already implemented for AMD64.  The
optimization specifically targets the binary.BigEndian.PutUint* functions.

encoding-binary results on Amberwing:
name                   old time/op    new time/op    delta
ReadSlice1000Int32s      9.83µs ± 2%    9.78µs ± 1%     ~     (p=0.362 n=9+10)
ReadStruct               5.24µs ± 3%    5.19µs ± 2%     ~     (p=0.285 n=10+10)
ReadInts                 8.35µs ± 8%    8.44µs ± 3%     ~     (p=0.323 n=10+10)
WriteInts                3.38µs ± 3%    3.44µs ±15%     ~     (p=0.921 n=9+10)
WriteSlice1000Int32s     11.4µs ± 6%    10.2µs ± 4%   -9.94%  (p=0.000 n=10+10)
PutUint16                 510ns ±12%     500ns ± 0%     ~     (p=0.586 n=10+7)
PutUint32                 530ns ±15%     490ns ±12%     ~     (p=0.086 n=10+10)
PutUint64                 550ns ± 0%     470ns ± 6%  -14.52%  (p=0.000 n=7+10)
LittleEndianPutUint16     500ns ± 0%     475ns ±16%     ~     (p=0.120 n=7+10)
LittleEndianPutUint32     450ns ± 0%     517ns ±16%  +14.81%  (p=0.004 n=8+9)
LittleEndianPutUint64     550ns ± 0%     485ns ±13%  -11.82%  (p=0.000 n=8+10)
PutUvarint32              685ns ±12%     622ns ± 4%   -9.17%  (p=0.005 n=10+9)
PutUvarint64              735ns ± 9%     711ns ± 9%     ~     (p=0.272 n=10+9)
[Geo mean]               1.47µs         1.42µs        -3.87%

name                   old speed      new speed      delta
ReadSlice1000Int32s     407MB/s ± 2%   409MB/s ± 1%     ~     (p=0.362 n=9+10)
ReadStruct             14.3MB/s ± 3%  14.4MB/s ± 2%     ~     (p=0.250 n=10+10)
ReadInts               3.59MB/s ± 7%  3.56MB/s ± 4%     ~     (p=0.340 n=10+10)
WriteInts              8.87MB/s ± 3%  8.74MB/s ±13%     ~     (p=0.890 n=9+10)
WriteSlice1000Int32s    352MB/s ± 6%   391MB/s ± 4%  +11.03%  (p=0.000 n=10+10)
PutUint16              3.95MB/s ±13%  4.00MB/s ± 0%     ~     (p=0.312 n=10+7)
PutUint32              7.62MB/s ±17%  8.21MB/s ±11%     ~     (p=0.086 n=10+10)
PutUint64              14.6MB/s ± 0%  17.1MB/s ± 6%  +17.28%  (p=0.000 n=7+10)
LittleEndianPutUint16  4.00MB/s ± 0%  4.23MB/s ±18%     ~     (p=0.176 n=7+10)
LittleEndianPutUint32  8.89MB/s ± 0%  7.64MB/s ±20%  -14.05%  (p=0.001 n=8+10)
LittleEndianPutUint64  14.6MB/s ± 0%  16.6MB/s ±12%  +13.86%  (p=0.000 n=8+10)
PutUvarint32           5.86MB/s ±14%  6.44MB/s ± 5%   +9.84%  (p=0.006 n=10+9)
PutUvarint64           10.9MB/s ± 8%  11.3MB/s ± 9%     ~     (p=0.373 n=10+9)
[Geo mean]             14.2MB/s       14.8MB/s        +3.93%

go1 results on Amberwing:
RegexpMatchEasy0_32       254ns ± 0%     254ns ± 0%    ~     (all equal)
RegexpMatchEasy0_1K       547ns ± 0%     547ns ± 0%    ~     (all equal)
RegexpMatchEasy1_32       252ns ± 0%     253ns ± 1%    ~     (p=0.294 n=8+10)
RegexpMatchEasy1_1K       782ns ± 0%     783ns ± 1%    ~     (p=0.529 n=8+9)
RegexpMatchMedium_32      316ns ± 0%     316ns ± 0%    ~     (all equal)
RegexpMatchMedium_1K     51.5µs ± 0%    51.5µs ± 0%    ~     (p=0.645 n=10+9)
RegexpMatchHard_32       2.75µs ± 0%    2.75µs ± 0%    ~     (all equal)
RegexpMatchHard_1K       78.7µs ± 0%    78.7µs ± 0%    ~     (p=0.754 n=10+10)
FmtFprintfEmpty          57.0ns ± 0%    57.0ns ± 0%    ~     (all equal)
FmtFprintfString          111ns ± 0%     111ns ± 0%    ~     (all equal)
FmtFprintfInt             114ns ± 0%     114ns ± 1%    ~     (p=0.065 n=9+10)
FmtFprintfIntInt          182ns ± 0%     178ns ± 0%  -2.20%  (p=0.000 n=10+10)
FmtFprintfPrefixedInt     225ns ± 0%     227ns ± 0%  +0.89%  (p=0.000 n=10+10)
FmtFprintfFloat           307ns ± 0%     307ns ± 0%    ~     (p=1.000 n=9+9)
FmtManyArgs               697ns ± 0%     701ns ± 2%    ~     (p=0.108 n=9+10)
Gzip                      436ms ± 0%     437ms ± 0%  +0.23%  (p=0.000 n=10+8)
HTTPClientServer         88.8µs ± 2%    89.6µs ± 1%  +0.98%  (p=0.019 n=10+10)
JSONEncode               20.1ms ± 1%    20.2ms ± 1%  +0.48%  (p=0.007 n=10+10)
JSONDecode               94.7ms ± 1%    94.1ms ± 0%  -0.62%  (p=0.000 n=10+9)
GobDecode                12.6ms ± 2%    12.6ms ± 1%    ~     (p=0.360 n=10+8)
GobEncode                12.0ms ± 1%    11.9ms ± 1%  -1.34%  (p=0.000 n=10+10)
Mandelbrot200            5.05ms ± 0%    5.05ms ± 0%  +0.12%  (p=0.000 n=10+10)
TimeParse                 448ns ± 0%     448ns ± 0%    ~     (p=0.529 n=8+9)
TimeFormat                501ns ± 1%     501ns ± 1%    ~     (p=1.000 n=10+9)
Template                 90.6ms ± 0%    89.1ms ± 0%  -1.67%  (p=0.000 n=9+9)
GoParse                  6.01ms ± 0%    5.96ms ± 0%  -0.83%  (p=0.000 n=10+9)
BinaryTree17              11.7s ± 0%     11.7s ± 0%    ~     (p=0.481 n=10+10)
Revcomp                   675ms ± 0%     675ms ± 0%    ~     (p=0.436 n=9+9)
Fannkuch11                3.26s ± 0%     3.27s ± 1%  +0.57%  (p=0.000 n=10+10)
[Geo mean]               67.4µs         67.3µs       -0.10%

name                   old speed      new speed      delta
RegexpMatchEasy0_32     126MB/s ± 0%   126MB/s ± 0%    ~     (p=0.353 n=10+7)
RegexpMatchEasy0_1K    1.87GB/s ± 0%  1.87GB/s ± 0%    ~     (p=0.275 n=8+10)
RegexpMatchEasy1_32     127MB/s ± 0%   126MB/s ± 1%    ~     (p=0.110 n=8+10)
RegexpMatchEasy1_1K    1.31GB/s ± 0%  1.31GB/s ± 1%    ~     (p=0.079 n=8+10)
RegexpMatchMedium_32   3.16MB/s ± 0%  3.16MB/s ± 0%    ~     (all equal)
RegexpMatchMedium_1K   19.9MB/s ± 0%  19.9MB/s ± 0%    ~     (p=0.889 n=10+9)
RegexpMatchHard_32     11.7MB/s ± 0%  11.7MB/s ± 0%    ~     (all equal)
RegexpMatchHard_1K     13.0MB/s ± 0%  13.0MB/s ± 0%    ~     (p=1.000 n=10+10)
Gzip                   44.5MB/s ± 0%  44.4MB/s ± 0%  -0.22%  (p=0.000 n=10+8)
JSONEncode             96.6MB/s ± 1%  96.1MB/s ± 1%  -0.48%  (p=0.007 n=10+10)
JSONDecode             20.5MB/s ± 1%  20.6MB/s ± 0%  +0.63%  (p=0.000 n=10+9)
GobDecode              61.0MB/s ± 2%  61.1MB/s ± 1%    ~     (p=0.372 n=10+8)
GobEncode              63.8MB/s ± 1%  64.7MB/s ± 1%  +1.36%  (p=0.000 n=10+10)
Template               21.4MB/s ± 0%  21.8MB/s ± 0%  +1.69%  (p=0.000 n=9+9)
GoParse                9.63MB/s ± 0%  9.71MB/s ± 0%  +0.84%  (p=0.000 n=9+8)
Revcomp                 377MB/s ± 0%   376MB/s ± 0%    ~     (p=0.399 n=9+9)
[Geo mean]             56.2MB/s       56.3MB/s       +0.20%

Change-Id: Ic915373f5ef512f9fbc45745860e5db7f6de6286
Reviewed-on: https://go-review.googlesource.com/97755
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

crypto: remove hand encoded amd64 instructions

Replace BYTE.. encodings with asm. This is possible due to asm
implementing more instructions and removal of
MOV $0, reg -> XOR reg, reg transformation from asm.

Change-Id: I011749ab6b3f64403ab6e746f3760c5841548b57
Reviewed-on: https://go-review.googlesource.com/97936
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

encoding/json: read ahead after value consumption

Eliminates the need for an extra scanner, read undo and some other tricks.

name                    old time/op    new time/op    delta
CodeEncoder-12            1.92ms ± 0%    1.91ms ± 1%   -0.65%  (p=0.000 n=17+20)
CodeMarshal-12            2.13ms ± 2%    2.12ms ± 1%   -0.49%  (p=0.038 n=18+17)
CodeDecoder-12            8.55ms ± 2%    8.49ms ± 1%     ~     (p=0.119 n=20+18)
UnicodeDecoder-12          411ns ± 0%     422ns ± 0%   +2.77%  (p=0.000 n=19+15)
DecoderStream-12           320ns ± 1%     307ns ± 1%   -3.80%  (p=0.000 n=18+20)
CodeUnmarshal-12          9.65ms ± 3%    9.58ms ± 3%     ~     (p=0.157 n=20+20)
CodeUnmarshalReuse-12     8.54ms ± 3%    8.56ms ± 2%     ~     (p=0.602 n=20+20)
UnmarshalString-12         110ns ± 1%      87ns ± 2%  -21.53%  (p=0.000 n=16+20)
UnmarshalFloat64-12        101ns ± 1%      77ns ± 2%  -23.08%  (p=0.000 n=19+20)
UnmarshalInt64-12         94.5ns ± 2%    68.4ns ± 1%  -27.60%  (p=0.000 n=20+20)
Issue10335-12              128ns ± 1%     100ns ± 1%  -21.89%  (p=0.000 n=19+18)
Unmapped-12                427ns ± 3%     247ns ± 4%  -42.17%  (p=0.000 n=20+20)
NumberIsValid-12          23.0ns ± 0%    21.7ns ± 0%   -5.73%  (p=0.000 n=20+20)
NumberIsValidRegexp-12     641ns ± 0%     642ns ± 0%   +0.15%  (p=0.003 n=19+19)
EncoderEncode-12          56.9ns ± 0%    55.0ns ± 1%   -3.32%  (p=0.012 n=2+17)

name                    old speed      new speed      delta
CodeEncoder-12          1.01GB/s ± 1%  1.02GB/s ± 1%   +0.71%  (p=0.000 n=18+20)
CodeMarshal-12           913MB/s ± 2%   917MB/s ± 1%   +0.49%  (p=0.038 n=18+17)
CodeDecoder-12           227MB/s ± 2%   229MB/s ± 1%     ~     (p=0.110 n=20+18)
UnicodeDecoder-12       34.1MB/s ± 0%  33.1MB/s ± 0%   -2.73%  (p=0.000 n=19+19)
CodeUnmarshal-12         201MB/s ± 3%   203MB/s ± 3%     ~     (p=0.151 n=20+20)

name                    old alloc/op   new alloc/op   delta
Issue10335-12               320B ± 0%      184B ± 0%  -42.50%  (p=0.000 n=20+20)
Unmapped-12                 568B ± 0%      216B ± 0%  -61.97%  (p=0.000 n=20+20)
EncoderEncode-12           0.00B          0.00B          ~     (all equal)

name                    old allocs/op  new allocs/op  delta
Issue10335-12               4.00 ± 0%      3.00 ± 0%  -25.00%  (p=0.000 n=20+20)
Unmapped-12                 18.0 ± 0%       4.0 ± 0%  -77.78%  (p=0.000 n=20+20)
EncoderEncode-12            0.00           0.00          ~     (all equal)

Fixes #17914
Updates #20693
Updates #10335

Change-Id: I0459a52febb8b79c9a2991e69ed2614cf8740429
Reviewed-on: https://go-review.googlesource.com/47152
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

math: remove unused variable

useSSE41 was used inside asm implementation of floor to select between base and ss4 code path.
We intrinsified floor and left asm functions as a backup for non-sse4 systems.
This made variable unused, so remove it.

Change-Id: Ia2633de7c7cb1ef1d5b15a2366b523e481b722d9
Reviewed-on: https://go-review.googlesource.com/97935
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

runtime/trace: skip TestUserTaskSpan upon timestamp error

Change-Id: I030baaa0a0abf1e43449faaf676d389a28a868a3
Reviewed-on: https://go-review.googlesource.com/97857
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: Peter Weinberger <pjw@google.com>

test: implement negative rules in asmcheck

Change-Id: I2b507e35cc314100eaf2ec2d1e5107cc2fc9e7cf
Reviewed-on: https://go-review.googlesource.com/97818
Reviewed-by: Keith Randall <khr@golang.org>

test: in asmcheck, regexp must match from beginning of line

This avoid simple bugs like "ADD" matching "FADD". Obviously
"ADD" will still match "ADDQ" so some care is still required
in this regard, but at least a first class of possible errors
is taken care of.

Change-Id: I7deb04c31de30bedac9c026d9889ace4a1d2adcb
Reviewed-on: https://go-review.googlesource.com/97817
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>

test: improve asmcheck syntax

asmcheck comments now support a compact form of specifying
multiple checks for each platform, using the following syntax:

   amd64:"SHL\t[$]4","SHR\t[$]4"

Negative checks are also parsed using the following syntax:

   amd64:-"ROR"

though they are still not working.

Moreover, out-of-line comments have been implemented. This
allows to specify asmchecks on comment-only lines, that will
be matched on the first subsequent non-comment non-empty line.

    // amd64:"XOR"
    // arm:"EOR"

    x ^= 1

Change-Id: I110c7462fc6a5c70fd4af0d42f516016ae7f2760
Reviewed-on: https://go-review.googlesource.com/97816
Reviewed-by: Keith Randall <khr@golang.org>

runtime: don't allocate to build strings of length 1

Use staticbytes instead.
Instrumenting make.bash shows approx 0.5%
of all slicebytetostrings have a buffer of length 1.

name                     old time/op  new time/op  delta
SliceByteToString/1-8    14.1ns ± 1%   4.1ns ± 1%  -71.13%  (p=0.000 n=17+20)
SliceByteToString/2-8    15.5ns ± 2%  15.5ns ± 1%     ~     (p=0.061 n=20+18)
SliceByteToString/4-8    14.9ns ± 1%  15.0ns ± 2%   +1.25%  (p=0.000 n=20+20)
SliceByteToString/8-8    17.1ns ± 1%  17.5ns ± 1%   +2.16%  (p=0.000 n=19+19)
SliceByteToString/16-8   23.6ns ± 1%  23.9ns ± 1%   +1.41%  (p=0.000 n=20+18)
SliceByteToString/32-8   26.0ns ± 1%  25.8ns ± 0%   -1.05%  (p=0.000 n=19+16)
SliceByteToString/64-8   30.0ns ± 0%  30.2ns ± 0%   +0.56%  (p=0.000 n=16+18)
SliceByteToString/128-8  38.9ns ± 0%  39.0ns ± 0%   +0.23%  (p=0.019 n=19+15)

Fixes #24172

Change-Id: I3dfa14eefbf9fb4387114e20c9cb40e186abe962
Reviewed-on: https://go-review.googlesource.com/97717
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>